Back focal plane imaging of Tamm plasmons and their coupled emission

The unique optical properties of Tamm plasmons (TPs) – such as flexible wavevector matching conditions including inplane wavevector within the light line, and existing both S‐ and P‐polarized TPs − facilitate them for direct optical excitation. The Tamm plasmon‐coupled emission (TPCE) from a combined photonic–plasmonic structure sustaining both surface plasmons (SPs) and TPs is described in this paper. The sensitivity of TPCE to the emission wavelength and polarization is examined with back focal plane imaging and verified with the numerical calculations. The results reveal that the excited probe can couple with both TPs and SPs, resulting in surface plasmon‐coupled emission (SPCE) and TPCE, respectively. The TPCE angle is strongly dependent on the wavelength allowing for spectral resolution using different observation angles. These Tamm structures provide a new tool to control the optical emission from dye molecules and have many potential applications in fluorescence‐based sensing and imaging.     

Measurement of 129Xe frequency shift due to Cs–129Xe collisions

Enhancement factor K0, which characterizes NMR and EPR frequency shifts for Cs-129Xe, is measured for the first time. The enhancement factor r-o was measured to be （702±41） at 80 ℃ and （653±20） at 90 ℃, using the NMR frequency shift, detected by atomic magnetometer at a low magnetic field of 100 nT. This result is useful for predicting the EPR frequency shifts for Cs and the NMR frequency shifts for 129Xe in spin-exchange cells.     

Inactivation of bovine immunodeficiency virus by photodynamic therapy with HMME

To investigate the effect of photodynamic therapy (PDT) with hematoporphrin monomethyl ether (HMME) on bovine immunodeficiency virus (BIV) can provide the basis theory for photoinactivation of human immunodeficiency virus (HIV). To assess the protection of HMME-PDT on the cell line Cf2Th infected with BIVR29 by 3-(4,5)-dimethylthiahiazol-2-yl-3,5-di-phenytetrazolium bromide (MTT) with power density of 5 and 25 mW/cm2 and energy density from 0.6 to 3 J/cm<'2>. To observe the inhibition of membrane fusion using a new reporter cell line BIVE by fluorescence microscope. HMME-PDT has significant protectant effects on Cf2Th-BIVR29 with both power densities, especially in the group of high power density. Fluorescent microscope shows that there is no significant difference between the group of PDT and control, which means PDT could not inhibit the BIV-mediated membrane fusion.     

Preparation and Characterization of Chitosan-Blended Multiwalled Carbon Nanotubes

Composites comprised of chitosan (CS) and multiwalled carbon nanotubes (MWCNTs) were fabricated by milling and ultrasonication dispersion methods. Scanning electron microscopy images showed homogeneous dispersion of MWCNTs throughout the CS matrix for samples prepared by either ultrasonication or milling methods. Further, the crystallinity of the CS component was found to decrease with the addition of MWCNTs, although the decomposition temperature and the storage modulus (E′) of the samples were improved. The decomposition temperature for the composite prepared by milling was 7°C higher than that by the ultrasonication. Meanwhile, the E′ decreased relatively slowly with temperature in the dynamic mechanical analysis measurements. In addition, IR analysis implied an interaction between CS and MWCNTs, which likely originated from hydrogen bonds between the amino, hydroxyl, and carboxyl groups of the two components. Compared with the ultrasonication, milling was more effective to promote the formation of the hydrogen bonds between CS and the MWCNTs and thus enhance the thermal stability of CS.     

电机转子内部通风冷却系统的流动分析与结构改进

本文根据某电机通风冷却系统的总体流动性能分析结果,采用数值模拟方法分析了该电机转子冷却系统中形状最为复杂、流动损失最大的旋转槽道内部三维流场.采用区域分块与边界拼接方法建立网格系统,数值计算结果表明,该旋转槽道内结构存在改进空间.为减少流动的局部阻力损失,对原模型流道结构进行改进,并建立了新的三维模型.新模型数值模拟结果表明,改进后的结构可以在保证换热效果基本保持不变的情况下,大大降低槽道内部流动损失.     

原始数据中束流相关本底的分离

束流相关本底处理的不确定性是在BES/BEPC上进行R值测量的主要误差来源之一,提出从原始数据中分离出束流相关样本的新方法, 并把此样本用于调节强子产生器LUARLW的参数,以减小强子探测效率的系统误差, 提高R值的测量精度.     

正交小波变换在散斑图象相关计算中的应用

本文在散斑图象的相关计算处理技术中引入了二维离散正交小波变换,详细叙述了其原理,给出了实验计算的结果,并与原始的空域相关计算进行了比较,从中可以看出:无论是相关计算精度,还是相关搜索速度,小波相关都具有明显的优越性.     

利用GHZ态实现多原子缠结态的量子隐形传态(英文)

提出一种利用 GHZ态实现多原子缠结态的量子隐形传态方案 .当作为量子通道的 GHZ态含有一个单模高 Q腔时 ,大大地简化了量子稳形传态中的联合测量过程     

New solitary wave solutions for nonlinear evolution equations

Three important nonlinear evolution equations are solved with the aid of the symbolic manipulation system.Maple,using the direct algebraic method proposed recently,We explicitly obtain several new solutions of physical interest in addition to rederiving all the known solutions.     

Effects of duty ratio at low frequency on growth mechanism of micro-plasma oxidation ceramic coatings on Ti alloy

The aim of this work is to study the effects of duty ratio on the growth mechanism of the ceramic coatings on Ti-6Al-4V alloy prepared by pulsed single-polar MPO at 50 Hz in NaAlO₂ solution. The phase composition of the coatings was studied by X-ray diffraction, and the morphology and the element distribution in the coating were examined through scanning electron microscopy and energy dispersive spectroscopy. The thickness of the coatings was measured by eddy current coating thickness gauge. The corrosion resistance of the coated samples was examined by linear sweep voltammetry technique in 3.5% NaCl solution. The changes of the duty ratio (D) of the anode process led to the changes of the mode of the spark discharge during the pulsed single-polar MPO process, which further influenced the structure and the morphology of the ceramic coatings. The coatings prepared at D = 10% were composed of a large amount of Al₂TiO₅ and a little γ-Al₂O₃ while the coatings prepared at D = 45% were mainly composed of α-Al₂O₃ and γ-Al₂O₃. The coating thickness and the roughness were both increased with the increasing D due to the formation of Al₂O₃. The formation of Al₂TiO₅ resulted from the spark discharge due to the breakdown of the oxide film, while the formation of Al₂O₃ resulted from the spark discharge due to the breakdown of the vapor envelope. The ceramic coatings improved the corrosion resistance of Ti-6Al-4V alloy. And the surface morphology and the coating thickness determined the corrosion resistance of the coated samples prepared at D = 45% was better than that of the coated samples prepared at D = 10%.