Synthesis,Characterizations, Magnetism and Thermal Degradation of a 2‐Fold Interpenetrated 3D Cobalt‐Organic Framework

A new coordination polymer, [Co₂(L)₂(4,4′‐bipy)]_n·3nH₂O ( 1 ) based on 5‐(3‐methyl‐5‐phenyl‐4H‐1,2,4‐triazol‐4‐yl)isophthalic acid (H₂ L ) and 4,4′‐bipyridine (4,4′‐bipy) has been hydrothermally synthesized and characterized by single‐crystal X‐ray diffraction, XRPD, IR, and elemental analysis. Temperature‐dependent magnetic susceptibility and thermal degradation for 1 were also studied. The asymmetric unit of compound 1 consists of two crystallographically independent Co(II) ion, two L ^2? ligand, one 4,4′‐bipy ligand, and three lattice water molecules. The 2D triangle networks were linked by the bridging 4,4′‐bipy ligand to give rise to a 2‐fold interpenetrated 3D architecture. The simplest cyclic motif of the 2D networks is a triangle ring consisting of three Co(II) cations and three L ^2? ligands. So we can define Co(II) ions as 4‐connected nodes and the L ^2? ligands as 3‐connected nodes. Thus, the 3D structure can be described as a 2‐fold parallel interpenetrated ins InS 3,4‐conn topology.     

Rapid Sample Pretreatment,Identification and Determination of Active Constitutents in Water‐soluble Radix isatidis Extract via MAE,ESI‐MS and RODWs‐HPLC

In this study, we successfully studied water‐soluble extract from Radix isatidis. Optimized conditions of MAE were listed, the sample can be extracted completely in 10 minutes under microwave power of 400W and solid/liquid ratio of 1:80. Active compounds in water‐soluble extract from R. isatidis were identified with HPLC‐DAD/ESI‐MS, these compounds followed by cytidine, uridine, guanosine, (R,S)‐goitrin and adenosine. RODWs–HPLC as a new sensitive chromatography were also first proposed and investigated, we favoringly used this method for simultaneous determination of these active constitutents in water‐soluble R. isatidis extract. Chromatographic separation was performed on a Diamonsil C18 column (5 μm, 150 mm × 4.6 mm) with a mobile phase gradient consisting of methanol and water at a flow‐rate of 1.0 mL/min, detection wavelengths 240, 250, 260 and 270 nm, the retention times of the tested five compounds were about 4.2, 5.8, 11.1, 14.2 and 20.8 min respectively, the limits of detection were 15, 12, 20, 5.8 and 24 ng/mL for cytidine, uridine, guanosine, (R,S)‐goitrin and adenosine respectively, their linear ranges were between 0.045 and 350 μg/mL with correlation coefficient (R) of 0.9998‐0.9999. The relative standard deviations (RSDs) of intra‐day and inter‐day assays were 0.30‐2.36% and 0.86‐2.54% respectively. Extraction recoveries were 94.25‐106.21%. This novel analytical method was shown to be simple, low‐cost, sensitive and reliable for multiple components in complex or undeveloped materials via MAE, ESI‐MS and RODWs‐HPLC.     

Electrochemical aptamer sensor for highly sensitive detection of mercury ion with Au/Pt@carbon nanofiber‐modified electrode

In this paper, an electrochemical aptamer sensor was proposed for the highly sensitive detection of mercury ion (Hg²⁺). Carbon nanofiber (CNF) was prepared by electrospinning and high‐temperature carbonization, which was used for the loading of platinum nanoparticles (PtNPs) by the hydrothermal method. The Pt@CNF nanocomposite was modified on the surface of carbon ionic liquid electrode (CILE) to obtain Pt@CNF/CILE, which was further decorated by gold nanoparticles (AuNPs) through electrodeposition to get Au/Pt@CNF/CILE. Self‐assembling of the thiol‐based aptamer was further realized by the formation of Au‐S bond to get an electrochemical aptamer sensor (Aptamer/Au/Pt@CNF/CILE). Due to the specific binding of aptamer probe to Hg²⁺ with the formation of T‐Hg²⁺‐T structure, a highly sensitive quantitative detection of Hg²⁺ could be achieved by recording the changes of current signal after reacting with Hg²⁺ within the concentration range from 1.0 × 10^?15 mol/L to 1.0 × 10^?6 mol/L and the detection limit of 3.33 × 10^?16 mol/L (3σ). Real water samples were successfully analyzed by this method.     

A Conjugated Copolymer Bearing Imidazolium-based Ionic Liquid:Electrochemical Synthesis and Electrochromic Properties

An imidazolium-based ionic liquid(IL) modified triphenylamine derivative,namely 1-(4-((4-(diphenylamino)benzoyl) oxy)butyl)-3-methyl imidazole tetrafluoroborate(TPAC_6 IL-BF_4),was designed and synthesized,and further applied with 3,4-ethylene dioxythiophene(EDOT)to prepare conjugated copolymer P(EDOT:TPAC_6 IL-BF_4) via electrochemical polymerization.The cyclic voltammetry curves show that the copolymer P(EDOT:TPAC_6 IL-BF_4) possesses two pairs of redox peaks,which should be ascribed to the redox behaviors of EDOT and triphenylamine.The ultraviolet-visible(UV-Vis) absorption spectrum of P(EDOT:TPAC_6 IL-BF_4) exhibits one maximum absorption peak at 580 nm and a small shoulder characteristic peak at 385 nm under neutral state which are assigned to π-π~* conjugated structure of EDOT and triphenylamine.After being applied at the positive voltage,the copolymer color changes from dark blue to light blue,which is close to the color of poly(3,4-ethylenedioxythiophene)(PEDOT).Surprisingly,the copolymer P(EDOT:TPAC_6 IL-BF_4) shows shorter switching time of 0.37 s,0.30 s at 580 nm and 0.38 s,0.45 s at 1100 nm compared with PEDOT.It is more intriguing that the copolymer P(EDOT:TPAC_6 IL-BF_4) exhibits electrochromism even in free supporting electrolyte.The results confirm that the existence of imidazolium-based ionic liquid has an improvement on the ion diffusion properties and the switching time of conjugated polymer,which may provide a potential direction for the preparation of high-performance electrochromic materials.     

Inorganic–Organic Hybrid Molecular Clusters with Cu2I2 Rhomboid Dimer Core as Light-Emitting Coating Materials

Journal of Cluster Science - In this paper, a series of light-emitting copper(I) iodide inorganic–organic hybrid clusters has been synthesized, and they are 0D-Cu2I2(fmp)4 (1,...     

Synthesis and Infrared Multi‐band Absorption Properties of Core‐shell NaYF4:Yb3+, Er3+@SiO2 Nanoparticles

Due to the unique size effects, nanomaterials in infrared absorption have attracted much attention for their strong absorption in the infrared region. To achieve the infrared multi‐band absorption, we propose to synthesize a core‐shell structure nanomaterial consisting of NaYF₄:Yb³⁺, Er³⁺ core and a layer of SiO₂ as shell. A series of NaYF₄:Yb³⁺, Er³⁺ nanocrystals were synthesized through hydrothermal method by adjusting the ratio of citric acid(CA)‐to‐NaOH, and the effects of CA concentration, and NaOH concentration were studied in detail. NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were synthesized by sol‐gel method using TEOS as silica source. The results show that the core‐shell NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were successfully synthesized. Up‐conversion spectra of these nanoparticles were recorded with 980 nm laser excitation under room temperature. There are no changes of the emission centers of nanoparticles before or after silica coating, but the emission intensities of nanoparticles after silica coating are weakened. Furthermore, the property of infrared multi‐band absorption was tested through ultraviolet‐visible‐near infrared spectrophotometer and infrared absorption spectra. The results illustrate that the multi‐band infrared absorption nanomaterial was successfully synthesized.     

Direct Dynamic Evidence of Charge Separation in a Dye‐Sensitized Solar Cell Obtained under Operando Conditions by Raman Spectroscopy

Interfaces play an important role in enhancing the energy conversion performance of dye‐sensitized solar cells (DSCs). The interface effects have been studied by many techniques, but most of the studies only focused on one part of a DSC, rather than on a complete solar cell. Hence, monitoring the interface evolution of a DSC is still very challenging. Here, in situ/operando resonance Raman (RR) spectroscopic analyses were carried out to monitor the dynamics of the photovoltaic conversion processes in a DSC. We observed the creation of new species (i.e., polyiodide and iodine aggregates) in the photosensitization process. We also obtained molecular‐scale dynamic evidence that the bands from the C=C and C=N bonds of 2,2′‐bipyridyl (bpy), the S=C=N bonds of the NCS ligand, and photochemical products undergo reasonably strong intensity and frequency changes, which clearly demonstrates that they are involved in charge separation. Furthermore, RR spectroscopy can also be used to quickly evaluate the performance of DSCs.     

低温溶胶凝胶法制备TiO2薄膜减摩性能的研究

采用溶胶-凝胶法并结合水热后处理技术在金属铜表面制备了TiO_2薄膜,利用扫描电子显微镜、X射线衍射对薄膜的表面形貌、晶型进行了表征,通过极化曲线研究了TiO_2薄膜在3.5%NaCl水溶液中的耐蚀性能,并考察了TiO_2薄膜的摩擦磨损性能.结果表明:170℃下水热处理后得到的TiO_2薄膜与480℃直接焙烧处理制备的TiO_2薄膜的表面形貌和晶型存在着明显差异,前者具有较低的摩擦系数和更长的耐磨寿命,同时在3.5%Na Cl溶液中的耐蚀性能也明显优于后者.     

Stock Index Prediction Based on Time Series Decomposition and Hybrid Model

The stock index is an important indicator to measure stock market fluctuation, with a guiding role for investors’ decision-making, thus being the object of much research. However, the stock market is affected by uncertainty and volatility, making accurate prediction a challenging task. We propose a new stock index forecasting model based on time series decomposition and a hybrid model. Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) decomposes the stock index into a series of Intrinsic Mode Functions (IMFs) with different feature scales and trend term. The Augmented Dickey Fuller (ADF) method judges the stability of each IMFs and trend term. The Autoregressive Moving Average (ARMA) model is used on stationary time series, and a Long Short-Term Memory (LSTM) model extracts abstract features of unstable time series. The predicted results of each time sequence are reconstructed to obtain the final predicted value. Experiments are conducted on four stock index time series, and the results show that the prediction of the proposed model is closer to the real value than that of seven reference models, and has a good quantitative investment reference value.     

关于合理确定集装箱码头装船顺序的算法

如何在给出箱区图和配载图的情况下,根据不同的装船方式,运用计算机程序确定合理的发箱和装箱顺序?本文主要依据实际数据,针对两种在码头实际装船作业中应用性较强的装船方式进行了研究,分别对其做了建立数学矩阵模型,制定合理算法,编写M ATLAB程序等工作,并论证了它们在实际操作中的可行性.本文的研究结果会在集装箱码头的实际装船作业中具有很强的应用性.