A simple anisotropic clay plasticity model

An anisotropic clay plasticity constitutive model is extended to include a non-associative flow rule for the successful simulation of the response under undrained loading for some normally consolidated sensitive clays, including possible softening response, without altering otherwise the simple basic structure of the formulation. The model has been developed within the framework of critical state soil mechanics (CSSM) for the triaxial space. The model's structure deviates, in general, from the particular premises of CSSM in regards to a unique critical state line in the space of void ratio and effective pressure, in order to simulate observed experimental data.     

Validation of a fully automated high throughput liquid chromatographic/tandem mass spectrometric method for roxithromycin quantification in human plasma. Application to a bioequivalence study

A fully automated high-throughput liquid chromatography/tandem mass spectrometry (LC-MS/MS) method was developed for the determination of roxithromycin in human plasma. The plasma samples were treated by liquid-liquid extraction (LLE) in 2.2 mL 96-deep-well plates. Roxithromycin and the internal standard clarithromycin were extracted from 100 microL of human plasma by LLE, using methyl t-butyl ether as the organic solvent. All liquid transfer steps were performed automatically using robotic liquid handling workstations. After vortexing, centrifugation and freezing, the supernatant organic solvent was evaporated and reconstituted. Sample analysis was performed by reversed-phase LC-MS/MS, with positive ion electrospray ionization, using multiple-reaction monitoring. The method had a very short chromatographic run time of 1.6 min. The calibration curve was linear for the range of concentrations 50.0-20.0x10(3) ng mL(-1). The proposed method was fully validated and it was proven to be selective, accurate, precise, reproducible and suitable for the determination of roxithromycin in human plasma. Therefore, it was applied to the rapid and reliable determination of roxithromycin in a bioequivalence study after per os administration of 300 mg tablet formulations of roxithromycin.     

Comparison of hydrophilic interaction and reversed-phase liquid chromatography coupled with tandem mass spectrometric detection for the determination of three pharmaceuticals in human plasma

In the present study, hydrophilic interaction liquid chromatography (HILIC) and reversed-phase liquid chromatography (RPLC) combined with tandem mass spectrometric detection (MS/MS) were evaluated and compared for the determination of donepezil, cetirizine and loratadine in human plasma, in terms of sensitivity and sample preparation procedure. A retention study for the above compounds of various polarities was performed, using both C(18) and silica columns, with several aqueous-organic mobile phase ratios, in order to investigate their retention mechanism profile under HILIC and RPLC. Both chromatographic conditions were compared for chromatographic analysis of plasma samples processed with a liquid-liquid extraction (LLE) method for donepezil determination, resulting in significantly higher sensitivity under HILIC. Furthermore, HILIC and RPLC were compared for direct injection, and novel methods including LLE, solid-phase extraction and protein precipitation protocols were developed. Direct injection technique significantly reduced sample preparation time, increasing at the same time method sensitivity. The current study contributes to broadening the range of analyzable compounds by HILIC-MS/MS to molecules of medium polarity.     

Validation of a novel LC-MS/MS method for the quantitation of colistin A and B in human plasma

A liquid chromatography/tandem mass spectrometry (LC-MS/MS) method, characterized by complete automation and high-throughput, was developed for the determination of colistin A and B in human plasma. All sample preparation procedures were performed by using 2.2 mL 96-deep-well plates, whereas robotic liquid-handling workstations were utilized for all liquid transfer steps, including solid-phase extraction (SPE). The whole preparation procedure was very rapid, whereas the method had a very short chromatographic run time of just 2 min. Sample analysis was performed by reversed phase LC-MS/MS, with positive electrospray ionization, using multiple reaction monitoring. The absence of available purified colistin A and B standards led to the development of a novel LC method with evaporative light-scattering detector for the determination of their stoichiometries in the standard mixture, along with its purity. The proposed bioanalytical method was fully validated and it was proven to be selective, accurate, precise, reproducible and suitable for the determination of colistin A and B in human plasma. It was applied successfully to a pharmacokinetic study for the determination of both analytes in samples of patients.     

The influence of temperature on rheological properties of blood mixtures with different volume expanders—implications in numerical arterial hemodynamics simulations

During the complicated cardiac surgery on a non-beating heart with cardiopulmonary bypass, protection of the heart is accomplished by injecting cold cardioplegic solutions. In most forms of circulatory shock, it is necessary to immediately restore the circulating volume. Intravenous solutions of volume expanders, such as hydroxyethyl starch and dextrans, are used to increase the volume of fluid in the circulating blood. In this work, blood samples of six donors were obtained and used to prepare mixtures with different volume expanders in concentrations ranging from 10 to 50 vol./vol.%. The flow curves of all mixtures in the temperature range from 4°C to 37°C were constructed and fitted to the Herschel–Bulkley model, in order to extract the shear thinning and yield stress parameters. To assess the influence of the observed changes in the rheological properties of blood on the hemodynamics in arterial vasculature, a realistic three-dimensional rigid-wall computational model was constructed from MRI images of the right carotid bifurcation obtained in vivo from a healthy male volunteer. The time-varying flow field was numerically computed using the Newtonian model as well as the Herschel–Bulkley model with the Papanastasiou regularization. The numerical simulations indicate only moderate changes in the time-averaged flow field that become accentuated when the instantaneous flow field is considered. We also found that although the influence of temperature, hematocrit, and volume expanders on hemodynamics is significant, this can primarily be attributed to the changes in the nominal viscosity of the flow medium.     

Estimation of the droplet size spread with the laser induced fluorescence/Mie technique

The laser measurement technique based on the ratio between the laser induced fluorescence (LIF) and the scattered light (Mie) intensities of droplets is presently limited to the evaluation of the Sauter mean diameter of the droplets. The important measurement of the droplet size spread is currently missing. An extension of the LIF/Mie technique for the measurement of droplet size spread is proposed here and is evaluated numerically. The method is based on the imperfect relationships between the scattered light intensity and the droplet surface area or the fluorescent light intensity and the droplet volume, which convey additional information that can be used to evaluate the droplet size spread.     

Multiaxial ratcheting with advanced kinematic and directional distortional hardening rules

Ratcheting is defined as the accumulation of plastic strains during cyclic plastic loading. Modeling this behavior is extremely difficult because any small error in plastic strain during a single cycle will add to become a large error after many cycles. As is typical with metals, most constitutive models use the associative flow rule which states that the plastic strain increment is in the direction normal to the yield surface. When the associative flow rule is used, it is important to have the shape of the yield surface modeled accurately because small deviations in shape may result in large deviations in the normal to the yield surface and thus the plastic strain increment in multi-axial loading. During cyclic plastic loading these deviations will accumulate and may result in large errors to predicted strains.This paper compares the bi-axial ratcheting simulations of two classes of plasticity models. The first class of models consists of the classical von Mises model with various kinematic hardening (KH) rules. The second class of models introduce directional distortional hardening (DDH) in addition to these various kinematic hardening rules. Directional distortion describes the formation of a region of high curvature on the yield surface approximately in the direction of loading and a region of flattened curvature approximately in the opposite direction. Results indicate that the addition of directional distortional hardening improves ratcheting predictions, particularly under biaxial stress controlled loading, over kinematic hardening alone.     

Resonance method of electric-dipole-moment measurements in storage rings

A "resonance method" of measuring the electric dipole moment (EDM) of nuclei in storage rings is described, based on two new ideas: (1) Oscillating particles' velocities in resonance with spin precession, and (2) alternately producing two sub-beams with different betatron tunes--one sub-beam to amplify and thus make it easier to correct ring imperfections that produce false signals imitating EDM signals, and the other to make the EDM measurement.     

Molecular shape,shape of the geometrically active atomic states,and hybridization

In a recent publication [C. A. Nicolaides and Y. Komninos, Int. J. Quant. Chem. 67 , 321 (1998)], we proposed that in certain classes of molecules the fundamental reason for the formation of covalent polyatomic molecules in their normal shape is to be found in the existence of a geometrically active atomic state (GAAS) of the central atom, whose shape, together with its maximum spin‐and‐space coupling to the ligands, predetermines the normal molecular shape (NMS). The shape of any atomic state was defined as that which is deduced from the maxima of the probability distribution ϱ(cos θ₁₂) of the angle formed by the position vectors of two electrons of an N‐electron atom. Because the shape of the GAAS determines the NMS and because the NMS allows the construction of corresponding hybrid orbitals, we examined and discovered the connection between the GAAS shape and Pauling's function for the strength of two equivalent orthogonal orbitals at angle θ₁₂ with one another. It is shown that the computed ϱ(cos θ₁₂) of the GAAS can be cast in a form which allows the deduction of the composition of the hybrid orbitals of maximum spin states with configurations sp³, sp³d⁵, sp³d⁵f⁷, slⁿ, s²lⁿ and the demonstration of the central atom's tendency to form bonds in directions which coincide with the nodal cones of the hybrid bond orbitals. These results not only reinforce the validity of the theory as to the fundamental “mechanism” for the formation in the normal shape of coordination compounds and covalently bonded polyatomic molecules, but also provide the justification for the relevance and importance of the hybridization model. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 71: 25–34, 1999