铜-康铜热电偶的低温不均匀性实验研究

从冰点到液氮温度的宽低温区内,对随机选取的铜-康铜热电偶进行了重复性精度标定.测试结果表明,多次断偶重复焊接行为将产生约0.272 mV的标准差.这意味着在液氮条件下,温度测量过程的最大误差将达8.98 ℃.所以,对现场、尤其对深冷区的现场进行精确测温实验中出现的断偶故障,重新焊接后必须重新标定才能继续使用.     

基于LabVIEW的超导磁体数采与测控系统研究

根据研制的大口径、高场强的超导强磁装置的特点,选择基于LabVIEW的数据采集和测控系统。低温传感器共六支,分别安装于磁体氦槽和冷屏不同位置,其中碳电阻温度计Cernox三支,铂电阻温度计Pt100两支、Pt1000一只,用于监测磁体温度;超导氦液面计一个,用于监测氦液面高度;根据磁体参数匹配研制了一套可调励磁速率的磁体专用直流电源及其失超保护系统,保证磁体安全运行。所有数据通过NI公司内插DAQ6251数据采集卡的PX I采集,用LabVIEW编写数据采集程序和人机界面。     

Numerical simulation on ionic wind in circular channels

Ionic wind induced by direct-current corona discharge has attracted considerable interest because of its low energy consumption, low noise emission, flexible designs, and lack of moving parts. The purpose of this study is to investigate the configuration parameters to improve the velocity of the ionic wind. Accordingly, this study develops a three-dimensional(3 D) model of circular tube with multi-needle-to-mesh electrode configurations, in this model, the influences of various parameters were explored,such as the mesh gap, the distribution of needle electrodes, the number of needle electrodes,and the radius of the circular channel. The numerical research results showed that the mesh gap, the distribution of needle electrodes, and the radius of the circular tube significantly affected the velocity of the ionic wind. When mesh gap is 12 mm,which indicates that there is an optimal mesh gap which can enhance the velocity of the ionic wind. What is more, changing the distribution of needle electrodes and increasing the number of needle electrodes can effectively improve the velocity of the ionic wind, the optimum distribution α of needle electrodes is 0.7–0.9, which greatly increase the velocity of the ionic wind. However, for multi-needle-to-mesh structure, the improvement of the radius of the circular channel is conducive to enhance the velocity and improve the velocity distribution.     

积分中值定理的推广及其应用

给出了积分中值定理的一个推广,讨论了推广的积分中值定理中间值的渐近性.     

Anthraquinones from the Aerial Parts of Rubia cordifolia with Their NO Inhibitory and Antibacterial Activities

The present study aimed to identify the composition of the aerial parts of Rubia cordifolia L. A chemical investigation on the EtOAc extracts from the aerial parts of Rubia cordifolia resulted in the isolation of four new anthraquinones, namely Cordifoquinone A–D (1–4), along with 16 known anthraquinones. Their structures were elucidated on the basis of NMR and HR-ESIMS data. All isolates were assessed for their inhibitory effects on NO production in LPS-stimulated RAW 264.7 macrophage cells. Compounds 1, 3 and 10 exhibited significant inhibitory activities with IC₅₀ values of 14.05, 23.48 and 29.23 μmol·L⁻¹, respectively. Their antibacterial activities of four bacteria, Escherichia coli (ATCC 25922), Staphylococcus aureus subsp. aureus (ATCC 29213), Salmonella enterica subsp. enterica (ATCC 14028) and Pseudomonas aeruginosa (ATCC 27853), were also evaluated. Our results indicated that the antibacterial activity of these compounds is inactive.     

Optimization of Biocompatibility for a Hydrophilic Biological Molecule Encapsulation System

Despite considerable advances in recent years, challenges in delivery and storage of biological drugs persist and may delay or prohibit their clinical application. Though nanoparticle-based approaches for small molecule drug encapsulation are mature, encapsulation of proteins remains problematic due to destabilization of the protein. Reverse micelles composed of decylmonoacyl glycerol (10MAG) and lauryldimethylamino-N-oxide (LDAO) in low-viscosity alkanes have been shown to preserve the structure and stability of a wide range of biological macromolecules. Here, we present a first step on developing this system as a future platform for storage and delivery of biological drugs by replacing the non-biocompatible alkane solvent with solvents currently used in small molecule delivery systems. Using a novel screening approach, we performed a comprehensive evaluation of the 10MAG/LDAO system using two preparation methods across seven biocompatible solvents with analysis of toxicity and encapsulation efficiency for each solvent. By using an inexpensive hydrophilic small molecule to test a wide range of conditions, we identify optimal solvent properties for further development. We validate the predictions from this screen with preliminary protein encapsulation tests. The insight provided lays the foundation for further development of this system toward long-term room-temperature storage of biologics or toward water-in-oil-in-water biologic delivery systems.     

Theoretical Investigation on the Hydrogen Evolution,Oxygen Evolution,and Oxygen Reduction Reactions Performances of Two-Dimensional Metal-Organic Frameworks Fe3(C2X)12 (X = NH,O, S)

Two-dimensional metal-organic frameworks (2D MOFs) inherently consisting of metal entities and ligands are promising single-atom catalysts (SACs) for electrocatalytic chemical reactions. Three 2D Fe-MOFs with NH, O, and S ligands were designed using density functional theory calculations, and their feasibility as SACs for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) was investigated. The NH, O, and S ligands can be used to control electronic structures and catalysis performance in 2D Fe-MOF monolayers by tuning charge redistribution. The results confirm the Sabatier principle, which states that an ideal catalyst should provide reasonable adsorption energies for all reaction species. The 2D Fe-MOF nanomaterials may render highly-efficient HER, OER, and ORR by tuning the ligands. Therefore, we believe that this study will serve as a guide for developing of 2D MOF-based SACs for water splitting, fuel cells, and metal-air batteries.     

Quantification of Venetoclax for Therapeutic Drug Monitoring in Chinese Acute Myeloid Leukemia Patients by a Validated UPLC-MS/MS Method

Venetoclax has emerged as a breakthrough for treatment of leukemia with a wide interindividual variability in pharmacokinetics. Herein, a rapid, sensitive, and reliable UPLC-MS/MS method for quantification of venetoclax in plasma was developed and validated. The method was operated in the multiple-reaction monitoring (MRM) mode to detect venetoclax at m/z transition 868.5 > 321.0 and IS at 875.5 > 321.0, respectively. Protein precipitation prior to injection into the LC-MS/MS and the analyte was separated on an ACQUITY UPLC BEH C18 column by gradient elution with acetonitrile and 0.1% formic acid in water. Linear calibration curves were obtained in the range of 25–8000 ng/mL. The specificity, recovery, matrix effect, and stability also met the acceptance criteria of FDA guidance. The method was successfully applied to analyze plasma in acute myeloid leukemia (AML) patients. The peak plasma concentration (C_max) of venetoclax in Chinese AML patient was 2966.0 ± 1595.0 ng/mL while the trough concentration (C_min) was 1018.0 ± 729.4 ng/mL. Additionally, C_max and C_min showed a positive correlation with AST levels. Furthermore, C_max was significantly higher in the older patients. The present method can be applied for TDM of venetoclax in treatment of hematological cancers.     

The Cradle-to-Cradle Life Cycle Assessment of Polyethylene terephthalate: Environmental Perspective

Over the last several years, the number of concepts and technologies enabling the production of environmentally friendly products (including materials, consumables, and services) has expanded. One of these ways is cradle-to-cradle (C2C) certified^TM. Life cycle assessment (LCA) technique is used to highlight the advantages of C2C and recycling as a method for reducing plastic pollution and fossil depletion by indicating the research limitations and gaps from an environmental perspective. Also, it estimates the resources requirements and focuses on sound products and processes. The C2C life cycle measurements for petroleum-based poly (ethylene terephthalate) (PET) bottles, with an emphasis on different end-of-life options for recycling, were taken for mainland China, in brief. It is considered that the product is manufactured through the extraction of crude oil into ethylene glycol and terephthalic acid. The CML analysis method was used in the LCIA for the selected midpoint impact categories. LCA of the product has shown a drastic aftermath in terms of environmental impacts and energy use. But the estimation of these consequences is always dependent on the system and boundary conditions that were evaluated throughout the study. The impacts that burden the environment are with the extraction of raw material, resin, and final product production. Minor influences occurred due to the waste recycling process. This suggests that waste degradation is the key process to reduce the environmental impacts of the production systems. Lowering a product’s environmental impact can be accomplished in a number of ways, including reducing the amount of materials used or choosing materials with a minimal environmental impact during manufacture processes.