新生儿硬肿症危险因素分析

为探讨新生儿硬肿症发病的危险因素，以便有效地预防该病，以41例硬肿症新生儿为研究对象，并设疾病对照组，运用多元Logistic回归，对8项可疑因素进行了分析。结果表明，早产，低体重，窒息和感染， 毒最终进入方程（P＞0．05），且OR值均大于1，是硬肿症发病的危险因素。硬肿症是原发病的一个并发症和严重征兆。寒冷不是本地区硬肿症的常见病因。流动人口的新生儿是硬肿症的高危人群。加强围产期母婴保健，普及新法复苏，感染的预防和早期有效干预，早产，低体重儿和重新新生儿热能供给和维持内环境平衡是预防硬肿症的有效措施。     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

A new method for the quantitation of aflatoxin M1 in urine by high performance liquid chromatography and its application to the etiologic study of hepatoma

A high performance liquid chromatographic (HPLC) method for the analysis of aflatoxin M1 (AFM1) in urine is described. Urine samples were treated with saturated lead acetate and AFM1 was extracted with chloroform. After washing with water to remove impurities the compound was derivatized with trifluoroacetic acid and the AFM1 derivative was analyzed quantitatively by HPLC. The sample pretreatment is simple and more selective. A good line correlation between AFM1 peak height and its concentration was obtained when AFM1 content was in the range of 50-400 pg. The ratio of recovery was 87.42%. Sensitivity is 0.01 ppb. The method is applicable to trace analysis. Results in urine of residents who live in the high/low liver cancer incidence area in Fushui county were the same as that of previous epidemiological investigation.     

Pt粒大小对PtNaY/HY体系氢溢出效应的影响

负载型金属催化剂的表面溢出效应(Spillover)是指吸附在金属上的物种可沿固体表面转移到担体上去的现象,是金属活性组分与担体相互作用的一个重要方面。近年来随着金属与担体之间强相互作用(SMSI)研究的逐渐深入,人们注意到溢出效应在SMSI中的重要作用。虽然提出溢出效应已有20多年的历史,并且人们采用不同的实验方法对此进行了广泛的研究,但对以分子筛为担体的负载型金属催化剂体系溢出效应的研究仍比较少。影     

稀土掺杂的(K, Sr)Cl·SiO2复合凝胶的荧光性能

采用sol gel法制备了单掺铕及共掺铕、铈的(K,Sr)Cl·SiO2复合凝胶,研究了复合凝胶的荧光性能。根据荧光测试结果,复合凝胶中,Eu3+在没有还原剂的作用下,可以与基质作用形成还原态的Eu2+,复合凝胶表现出相应的Eu2+荧光性能;研究认为,Ce3+,Eu3+共掺杂时,复合凝胶激发光谱与发射光谱峰位基本不变,但强度有所不同。330nm处的激发光谱明显增强,且发射光谱随Ce3+的掺杂量增加而增强。当Ce3+掺杂浓度为3.0%(原子分数)时,复合凝胶具有最大的荧光发射强度,表明Ce3+具有很好的敏化作用。在Ce3+,Eu3+共掺杂复合凝胶体系中,复合凝胶荧光强度增大的原因既可能是电子转移过程,也可能是Ce3+→Eu2+的能量传递过程所致。     

Sorption behavior of 2,4-dichlorophenol on marine sediment

The sorption behavior of 2,4-dichlorophenol on marine sediments treated by different methods was investigated systematically. The sorption of 2,4-dichlorophenol on marine sediments was completed mainly via ion exchange and surface polar sorption. Both the Freundlich and Langmuir isotherms were fit for describing its sorption behavior. The sorption behavior of 2,4-dichlorophenol was affected by various factors including aqueous salinity and temperature. The sorption amount of 2,4-dichlorophenol on marine sediments increased with increasing ion strength, but decreased with increasing temperature.     

CCl2(A1B1)被O2及取代甲烷类分子猝灭的动力学研究

对CCl4／Ar混合气体放电产生CCl2自由基，再用541.52nm激光将电子基态CCl2激发到激发态A^1B1（0，4，0）振动态k=0能级上，通过检测 激发态CCl2时间分辨荧光信号，测得室温下CCl2(A^1B1)被O2，CF4，CF2Cl，CH3NO2，CH2Br2等分子猝灭的实验结果，用改进的三能级模型分析处理实验数据，获得态分辨速常数KA和Ka值，并对实验结果进行了讨论。     

Order from Chaos: Self‐Assembly of Nanoprism from a Mixture of Tetratopic Terpyridine‐Porphyrin Conformers

Porphyrins have been widely used in the self‐assembly of metallo‐supramolecules. In this study, we introduced 2,2':6,2"‐terpyridine (tpy) into a porphyrin core to synthesize a tetratopic building block with multiple conformers. During the self‐assembly with Zn(II), such a mixture of conformers was able to form a discrete nanoprism with all building blocks in one conformation. Detailed characterizations, including NMR, ESI‐MS and traveling‐wave ion mobility‐mass spectrometry (TWIM‐MS), all supported the formation of the desired assemblies. AFM and TEM further confirmed the dimensions of assembled nanoprisms. Moreover, the photophysical properties of the ligands and complexes were noticeably different depending upon size and metal ion center.     

均三溴氯磺酚离解与质子化作用的研究

本文报道测钪新试剂均三溴氯磺酚在水溶液中的离解与质子化作用，用电位法和光度法测得了它的逐级离解常数与质子化常数，以及热力学参数，并由分布函数获得试剂主要存在形式和ｐＨ值的关系。     

分光光度法研究镧与间乙酰基偶氮氯膦(CPAmA)配合物的形成反应

本文用分光光度法研究了间乙酰基偶氮氯膦试剂在水溶液中的离解作用和质子化作用;镧与间乙酰基偶氮氯膦配合物的组成和β型配合物形成反应的条件和动力学特征,并测定了α型配合物的积累稳定常数