四磺酸基酞菁锌在水和非水溶剂中的电化学性质研究

在非水溶剂（二甲基亚砜（ＤＭＳＯ）及Ｎ,Ｎ＿二甲基甲酰胺（ＤＭＦ））中的伏安曲线．呈现三对电流峰,表明存在三个可逆或准可逆酞菁配体的单电子转移过程,而在水溶液中则不呈现准可逆行为,且波形改变很大．此外,还比较了四磺酸基酞菁锌的水溶液在自然光和红光（６００～７００ｎｍ）照射下的循环伏安曲线,其氧化还原峰的数目和峰电位基本不变,但在红光照射下比自然光照射下的峰电流明显增大．     

Hydrothermal Synthesis and Structural Characterization of a Tubular Arsenic-Vanadate: [CoII(2,2′-bpy)2]2[AsIII8VIV14O42(H2O)]·H2O

The hydrothermal reaction of VOSO₄, As₂O₃, CoC₂O₄·2H₂O and 2,2-bipy yields a novel arsenic-vanadate [Co^II(2,2-bpy)₂]₂[As^III₈V^IV ₁₄O₄₂(H₂O)]·H₂O (1), which is characterized by IR, elemental analysis, TGA, magnetic susceptibility and single crystal X-ray diffraction analysis. X-ray diffraction shows that compound 1 is the first example of tubular arsenic–vanadium cluster containing infinite {[Co(2,2-bpy)₂]₂[As₈V₁₄O₄₂(H₂O)]} chain constructed from [As₈V₁₄O₄₂(H₂O)] clusters interconnected through [Co(2,2-bpy)]²⁺ units. Crystal data: 1, orthorhombic, P 2₁2₁2₁, a=12.1401(2) Å, b=15.8722(1) Å, c=39.9533(5) Å, Z=4.Graphical Abstract: A novel polyoxoarsenicvanadate, [Co^II(2,2-bipy)₂]₂ [As^III₈V^IV ₁₄O₄₂(H₂O)]·H₂O, is depicted along with a tubular hybrid solid with a rhombic tube formed within the chain.     

Raman mapping and in situ SERS spectroelectrochemical studies of 6-mercaptopurine SAMs on the gold electrode

The self-assembled monolayers (SAMs) of 6-mercaptopurine (6MP) were formed at the roughened polycrystalline gold surfaces in acid and alkaline media. The time-dependent Raman mapping spectral analysis in conjunction with the quantum calculations for the vibrational modes using ab initio BLYP/6-31G method suggested that both of the resulted 6MP SAMs adopted the same adsorption mode through the S atom of pyrimidine moiety and the N7 atom of the imidazole moiety anchoring the gold surface in a vertical way. The in situ surface-enhanced Raman scattering spectroelectrochemical experiment was conducted to examine the stability of the SAMs at various bias potentials. It was found that the detaching process of the 6MP SAMs from the surface involved one electron reduction as the voltage was applied at ca. 0.7 V vs a standard calomel electrode.     

Determination of lutetium by fluorimetry, using BPMPHD and CTMAB

Lutetium(III) forms an association compound with a new synthetic reagent, 1,6-bi(1-phenyl-3-methyl-5-pyrazolone-4)hexandione (BPMPHD), and cetyltrimethylammonium bromide (CTMAB). The compound enhances the natural fluorescence of BPMPHD remarkably, upon which a new fluorescence method was developed for determining lutetium in rare earth (RE) samples. The determination range was 1.80 × 10^–7–8.8 × 10^–6 g/ml. The determination limit was 29 ng/ml. The composition of the ion associate was [Lu(BPMPHD)₂]–CTMAB⁺.     

Synthesis and Insulin—sensitizing Activity of a Series of 2—Benzyl—1,3—dicarbonyl Derivatives

A series of 2-benzyl-1,3-dicabonyl derivatives was synthesized.Their insulin-sensitizing activity was evaluated in 3T3-L1 preadipocyte cells.Compounds3,26 and 27 were found to possess strong insulin-sensitizing activity in vitro and were selected for further hypoglycemic evaluation in vivo.     

Oxidation of Stereo‐regular Poly(styrene‐co‐4‐methylstyrene) by Cobalt(II) Acetate Tetrahydrate/Sodium Bromide Catalyst

Chemical modification on the stereo‐regular poly(styrene‐co‐4‐methylstyrene) (sPS‐PMS) was attempted in this study. Metallocene copolymerization of styrene (St) and 4‐methylstyrene (MSt) was performed by using η⁵‐pentamethylcyclopentadienyl‐titanium(IV)tributoxide (Cp*Ti(OBu)₃)/methylaluminoxane (MAO)/tri‐iso‐butylaluminum (TIBA) catalyst in the bulk state. Cobalt(II) catalyst was then applied to oxidize the benzylic methyl group on the MSt units of the resulting sPS‐PMS copolymer. Both aldehyde and carboxylic acid in the oxidized products were resolved by the FTIR and ¹H NMR. The oxidized sPS‐PMSs exhibit a low and a high‐temperature T_g and T_m corresponding to the transitions in the amorphous and the crystalline regions. Hydrogen‐bond and polar interactions between the aldehyde and carboxylic acids tend to interrupt the regular chain packing of the oxidized sPS‐PMS, resulting in the lowering of T_m with oxidation level. The oxidized sPS‐PMS showed better adhesion to glass fiber than pure sPS‐PMS copolymer as evaluated from the respective SEM fractured micrographs.     

尼龙1010／尼龙6共聚物的表观相图研究

采用显微熔点法和ＤＳＣ测定了尼龙１０１０／尼龙６共聚物的表观相图；分析了投料比与链节结构单元含量的关系。最低熔点时尼龙１０１０／尼龙６的理论重量投料比为６０／４０，摩尔比为３３．３／６６．７，实验结果与此相近。     

Direct Trimethylsilylation of Phenanthrene and its Products—An Abnormal Silylation of Phenanthrene

Direct trimethylsilylation¹⁾ of phenanthrene in different molar ratio of phenanthrene/sodium/trimethylchlorosilane is reported and discussed. Instead of the aromatic silyl compounds, such as 9-trimethylsilylphenanthrene (V), the hydroaromatic silyl compounds, such as 9, 10–bis (trimethylsilyl)-9, 10-dihydrophenanthrene (I) were obtained preferentially. Structure of these compounds are characterized and discussed. These silylated products have a general trend to change their properties during long time storage in the atmosphere under exposure to light. A significant difference of chemical shifts between silylated aromatic compound (V) and silylated hydroaromatic compound (I-IV) was observed.     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.