An approximation-based approach for fuzzy multi-period production planning problem with credibility objective

This paper develops a fuzzy multi-period production planning and sourcing problem with credibility objective, in which a manufacturer has a number of plants or subcontractors. According to the credibility service levels set by customers in advance, the manufacturer has to satisfy different product demands. In the proposed production problem, production cost, inventory cost and product demands are uncertain and characterized by fuzzy variables. The problem is to determine when and how many products are manufactured so as to maximize the credibility of the fuzzy costs not exceeding a given allowable invested capital, and this credibility can be regarded as the investment risk criteria in fuzzy decision systems. In the case when the fuzzy parameters are mutually independent gamma distributions, we can turn the service level constraints into their equivalent deterministic forms. However, in this situation the exact analytical expression for the credibility objective is unavailable, thus conventional optimization algorithms cannot be used to solve our production planning problems. To overcome this obstacle, we adopt an approximation scheme to compute the credibility objective, and deal with the convergence about the computational method. Furthermore, we develop two heuristic solution methods. The first is a combination of the approximation method and a particle swarm optimization (PSO) algorithm, and the second is a hybrid algorithm by integrating the approximation method, a neural network (NN), and the PSO algorithm. Finally, we consider one 6-product source, 6-period production planning problem, and compare the effectiveness of two algorithms via numerical experiments.     

In-situ Reduction Synthesis of Bi/BiOI Heterostructure Films with High Photoelectrochemical Activity

The Bi/BiOI heterostructure films grew perpendicular to the FTO substrates were synthesized in-situ tlirough an electrochemical deposition and hydrogen reduction metliod. The metallic Bi nanoparticles were decorated onto the surface of BiOI nanosheets via an in-situ reduction, induced 6.3 times improvement of photocurrent density, compared to the pristine BiOI at 1.23 V vs. reversible hydrogen electrode(RHE).The enhancement of photoelectrochemical perfomiance was attributed not only to the efficient separation of charge resulted from surface plasmon resonance efleet, but also to the fast charge transfer at the interface due to the in-situ reduction of the films. This work provided a simple and facile strategy to in-situ construct heterostnicture films, and showed an effective metliod to improve the photoelectrochemical activity of Bi-based semiconductors.     

Insight into Iron Leaching from an Ascorbate-Oxidase-like Fe−N−C Nanozyme and Oxygen Reduction Selectivity**

Ascorbate (H₂A) is a well-known antioxidant to protect cellular components from free radical damage and has also emerged as a pro-oxidant in cancer therapies. However, such “contradictory” mechanisms underlying H₂A oxidation are not well understood. Herein, we report Fe leaching during catalytic H₂A oxidation using an Fe−N−C nanozyme as a ferritin mimic and its influence on the selectivity of the oxygen reduction reaction (ORR). Owing to the heterogeneity, the Fe-N_x sites in Fe−N−C primarily catalyzed H₂A oxidation and 4 e⁻ ORR via an iron-oxo intermediate. Nonetheless, trace O₂⋅⁻ produced by marginal N−C sites through 2 e⁻ ORR accumulated and attacked Fe-N_x sites, leading to the linear leakage of unstable Fe ions up to 420 ppb when the H₂A concentration increased to 2 mM. As a result, a substantial fraction (ca. 40 %) of the N−C sites on Fe−N−C were activated, and a new 2+2 e⁻ ORR path was finally enabled, along with Fenton-type H₂A oxidation. Consequently, after Fe ions diffused into the bulk solution, the ORR at the N−C sites stopped at H₂O₂ production, which was the origin of the pro-oxidant effect of H₂A.     

La掺杂 BiFeO3对苯酚光催化降解性能的影响

苯酚是一种稳定、毒性大且难降解的有机物,对人类和生态环境产生很大威胁,因此急需研发出能有效移除工业废水中苯酚污染物的方法.其中,绿色、高效的光催化氧化技术得到研究人员青睐.在半导体光催化剂中, BiFeO3具有带隙窄(2.2–2.5 eV)、化学稳定性好及成本低等优点,被看作是最有潜力的光催化剂.但是, BiFeO3存在光生电子空穴对复合率高,制备过程中易形成杂质相的缺点,使得其光催化活性很差,限制了 BiFeO3在光催化领域的应用.异种离子的引入能产生杂质能级或裁剪半导体带隙,同时促进光生载流子分离,故可考虑采用离子掺杂改性 BiFeO3的手段来抑制杂质相生成,提高载流子分离,从而提高 BiFeO3的光催化性能.本文以柠檬酸为络合剂,通过一步溶胶凝胶法合成了系列样品 Bi1-xLaxFeO3(摩尔分数x =0,0.10,0.15,0.20).通过 X射线衍射(XRD)、扫描电镜(SEM)、能谱(EDS)、透射电镜(TEM)、X射线光电子能谱(XPS)、紫外可见漫反射(UV-Vis DRS)及荧光光谱(PL)等手段对不同样品的物相、形貌、表面价态和光学性能进行了表征.并通过活性物种捕获实验和羟基自由基(?OH)产生实验分析了 Bi0.85La0.15FeO3样品在苯酚降解过程中的主要活性物种和降解机理.相对于单相 BiFeO3, La改性 BiFeO3催化剂的光降解苯酚性能均有提高,其中 La最佳掺杂量为0.15.在模拟太阳光下照射180 min后, Bi0.85La0.15FeO3的光催化活性达到96%,同时 COD去除率达到81.53%,并表现出好的循环使用活性和稳定性.研究发现,该光催化过程中主要的活性物种为?OH. XRD, SEM, TEM和 EDS结果表明, La元素掺杂进 BiFeO3结构中,且各元素分布均匀,同时,适量 La元素掺杂能有效抑制杂质相 Bi25FeO40的形成,而且 La掺杂 BiFeO3样品的颗粒尺寸略有减小,有利于电子空穴转移. XPS显示, La改性 BiFeO3样品的表面有氧空位形成,将有利于有机物的吸附和降解;另外,羟基氧和吸附氧含量增大,有利于活性氧物种形成. UV-Vis DRS和 PL测试证明, La改性后的样品对可见光的响应增强,样品带隙变窄,产生杂质能级,抑制了光生载流子复合,有利于产生更多载流子来促进活性物种形成,从而提高光催化活性.氧物种捕获实验说明,在 Bi0.85La0.15FeO3参与的苯酚降解过程中的主要活性物种是?OH,同时?OH的产生实验也证明了在光照下?OH在 Bi0.85La0.15FeO3光催化剂表面持续产生,并提出了光催化降解机理.     

Enzymatic degradation of block copolymers obtained by sequential ring opening polymerization of l-lactide and ?-caprolactone

Copolymers of ?-caprolactone and l-lactide with different molar ratios were prepared via sequential ring opening polymerization (ROP) of both monomers. The resulting PCL-PLLA-PCL triblock copolymers were characterized by using NMR, SEC, DSC and XRD. One melting peak corresponding to the PCL block was detected, but the presence of PLLA decreased the crystallinity of PCL. Enzyme-catalyzed biodegradation of solution cast films was investigated at 37 °C in the presence of Pseudomonas lipase. It was observed that the PLLA component retarded the degradation of the block copolymer as compared to the PCL homopolymer. Therefore, the enzymatic degradation rate can be adjusted by varying the composition of the copolymers. ¹H NMR and SEC data showed no significant chemical composition or molecular weight changes during degradation, indicating that the degradation proceeded according to a surface erosion mechanism. ESEM confirmed surface erosion with appearance of a rugged morphology.     

Development of a high-performance liquid chromatography method for the simultaneous quantification of quinoxaline-2-carboxylic acid and methyl-3-quinoxaline-2-carboxylic acid in animal tissues

A method of high-performance liquid chromatography with UV detection has been established for simultaneous quantitative determination of quinoxaline-2-carboxylic acid (QCA) and methyl-3-quinoxaline-2-carboxylic acid (MQCA), the marker residues for carbadox (CBX) and olaquindox (OLA), respectively, in the muscles and livers of porcine and chicken and in the muscle of fish. Tissue samples were subject to acid hydrolysis followed by liquid-liquid extraction and Oasis MAX solid-phase extraction clean-up. The method was validated according to the EU Commission Decision 2002/657/EC. The decision limits (CCalpha) were 0.7-2.6microg/kg and the detection capabilities (CCbeta) were 1.3-5.6microg/kg for QCA and MQCA in tissues. The recoveries of QCA and MQCA, spiked at levels of 2-100microg/kg, were from 70 to 110%; the relative standard deviation values were <20%. This simple, fast and economic method could be applied to the monitoring for the possible misuse of CBX and OLA in animal edible tissue samples.     

Two unprecedented inorganic-organic boxlike and chainlike hybrids based on arsenic-vanadium clusters linked by nickel complexes

Two novel organic-inorganic hybrid arsenic-vanadates, [{Ni(en)₂}₄(4,4′-bipy)₄{Ni(H₂O)₂}]₂[As₈V₁₄O₄₂(NO₃)]₄·16H₂O 1 and [Ni(en)₂(H₂O)₂]₂[{Ni(en)₂(H₂O)}₂As₈V₁₄O₄₂(NO₃)][{Ni(en)₂}As₈V₁₄O₄₂(NO₃)]·6H₂O 2 are reported in this study. Crystal data for compound 1: Tetragonal, I4/m, a=27.507(4) Å, b=27.507(4) Å, c=22.101(4) Å; V=16722(5) Å³, Z=2, R(final)=0.0508. Crystal data for compound 2: Triclinic, P-1, a=11.530(2) Å, b=14.883(3) Å, c=21.330(4) Å, α=76.94(3)°, β=76.58(3)°, γ=69.54(3)°, V=3293.4(1) Å³, Z=1, R(final)=0.0559. The boxlike structure of compound 1 is designed from [{Ni(en)₂}₄(4,4′-bipy)₄{Ni(H₂O)₂}] sheets pillared by [α-As₈V₁₄O₄₂] clusters, which represents the first mixed-organic ligand-decorated tetrameric As-V-O cluster. Compound 2 is constructed from the rarely [β-As₈V₁₄O₄₂] clusters and Ni coordination complex fragments. The electrochemical property and magnetic property of compound 1 have been studied.     

火焰原子吸收光谱法测定铅锌混合精矿中高含量的银

建立了以硝酸-硫酸溶样,在碱性介质中用火焰原子吸收光谱法测定铅锌混合精矿中高含量银的分析方法对硫酸用量、碱性介质的浓度、干扰离子等进行了探讨在0～4μg/mL范围内,银含量与吸光度呈线性关系,相关系数为0．9993加标回收率为98．78％～102．56％,测量结果的相对标准偏差小于2．0％,测定范围为500～3000g/t。     

Two-dimensional coordination polymer-based nanosensor for sensitive and reliable nucleic acids detection in living cells

A reliable and sensitive strategy which can assess nucleic acid levels in living cells would be essential for fundamental research of biomedical applications. Some nanomaterial-based fluorescence biosensors recently developed for detecting nucleic acids, however, are often with expensive, complicated and timeconsuming preparation process. Here, by using a facile bottom-up synthesis method, a two-dimensional(2 D) coordination polymer(CP) nanosheet, [Cu(tz)](Htz = 1,2,4-triazole), was successfully...