对苯二甲酸-铕-钇配合物的合成及荧光性质

以对苯二甲酸(H2L)为配体,合成了系列(Eu1-xYx)2L3.3H2O固体粉末配合物.通过元素分析、紫外吸收光谱、X射线衍射和红外光谱确定了配合物的组成和结构,并通过荧光光谱研究了它们的荧光性质.结果表明钇掺入配合物后,能增强Eu3+的特征荧光,当铕与钇的摩尔比为0.05∶0.95时荧光强度最强.     

聚(苯乙烯－丙烯酸)磁性高分子微球的制备和表征

利用双层表面活性剂改性的Fe3O4磁流体为种子,通过乳液聚合法考察了苯乙烯或苯乙烯-丙烯酸对Fe3O4磁流体的包覆情况,并考察了丙烯酸浓度及加入时间对磁性微球表面羧基含量的影响.结果表明,丙烯酸的加入可以明显改善包覆效果,在反应进行2h后加入0.4mL的丙烯酸可以得到包覆效果好且表面羧基含量大的磁性微球.     

超声条件下溶胶-凝胶法制备CaSiO3:(Pb,Mn)发光材料的研究

采用溶胶-凝胶法并辅以超声技术制备了CaSiO3: (Pb,Mn)发光材料,对合成物运用荧光光谱、DTA-TG、XRD、FTIR、TEM等手段进行了表征.研究了制备时的物料配比、超声时间及焙烧温度对样品发光强度的影响,找到了最佳的合成条件.结果表明,所得样品其荧光强度约为高温固相法样品的2倍,平均粒径则降低约300 nm.     

ANPZ的合成及ANPZ·DMSO(1:1)晶体结构

富氮杂环化合物被认为是理想的高威力含能材料,因为这些化合物大多具有高的分子密度、低易损性和正的生成焓[1].2,6-二氨基-3,5-二硝基吡嗪(ANPZ)是一种富氮杂环含能材料,也是合成新型高能钝感含能材料2,6-二氨基-3,5-二硝基吡嗪-1-氧化物(LLM-105)的前体.     

水蒸气超高温热泵系统的实验研究

近年来以低温室效应(GWP)的制冷剂的蒸汽压缩式高温热泵一直是余热回收领域的研究热点.为获得更高的输出温度,本课题组搭建了一台采用自然工质水作为循环冷媒的超高温热泵样机并进行了实验测试.实验结果表明蒸发温度为80℃,冷凝温度从115℃升至145℃时,热泵的COP从4.88降至1.89.在85℃蒸发,117℃冷凝时,最高...     

Synthesis and Crystal Structure of a Vanadium(Ⅴ) Complex with 2-Hydroxy-1-naphthaldehyde Isonicotinoyl Hydrazone

The mononuclear vanadium(Ⅴ) complex with 2-hydroxyl-1-naphthaldehyde isoncotinoyl hydrazone was synthesized and characterized by single-crystal X-ray diffraction.The crystal is of monoclinic,space group P2 1/n with a = 10.3153(15),b = 7.4024(11 ),c = 24.413(4) (A),β= 101.911(2)°,V= 1824.0(5) (A)3,Z = 4,Mr = 427.28,Dc = 1.556 g/cm3,F(000) = 880,μ(MoKα) =0.591,the final R = 0.0372 and wR = 0.0926.The vanadium(Ⅴ) atom adopts a distorted square-pyramidal geometry coordinated by the tridentate ligand and two oxygen atoms.The hydrogen bonds and strong π…π stacking interactions link the complex molecules into a 3-D network structure.     

Synthesis and Crystal Structure of N-Phenylbis（ferrocenecarboxyl）imide

The ferrocenyl compound,N-phenylbis(ferrocenecarboxyl)imide (C28H23NO2Fe2,Mr=517.17),was synthesized and structurally characterized by means of X-ray single-crystal dif-fraction. It crystallizes in monoclinic,space group C2/c with a=21.374(14),b=10.430(7),c= 10.741(7) ,β=114.184(8)°,V=2184(2) 3,Z=4,Dc=1.573 g/cm3,F(000)=1064,μ(MoKα)= 1.355 mm–1,T=291(2) K,the final R=0.0548 and wR=0.1437 for 1524 observed reflections with I > 2σ(I). In this compound,the nitrogen atom links two ferrocenyl groups and one phenyl group forming a novel imido derivative.     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

Influence of Fe2O3 and V2O5 on Crystalline Structure of Mg-Al Spinel Synthesized by Waste Aluminum Slag

Mg-Al spinel is synthesized by using industrial waste-residue and basic magnesium carbonate in the aluminum factory as the main raw materials. The influence of V2O5 and Fe2O3 mineralizers on the structure, cell parameters and microscopic morphology of synthesized Mg-Al spinel has been discussed. The Mg-Al spinel is characterized by using XRD, SEM and relevant analytical software, such as Philips plus, Rietveld quantification and so on. The experimental results show that certain amounts of V2O5 and Fe2O3 are beneficial to the formation of Mg-Al spinel, and the optimum addition of V2O5 and Fe2O3 is respectively 2wt% and 3wt%. V2O5 has few effects on cell parameters of Mg-Al spinel; but Fe2O3 can form solid solution with Mg-Al spinel in which Mg-Fe spinel can also dissolve to form continuous solid solution. Therefore, with the increase of Fe2O3 content, the cell parameters of Mg-Al approximately present linear increase.