One-dimensional Infinite Chain Organotin Compounds: Synthesis and Structural Characterization of Triphenyltin Thiazole-2-carboxylate and Triphenyltin 3-Pyridinylcarboxylate

ＩｎｔｒｏｄｕｃｔｉｏｎＯｒｇａｎｏｔｉｎｃａｒｂｏｘｙｌａｔｅｓａｒｅｗｉｄｅｌｙｕｓｅｄａｓｂｉｏｃｉｄｅｓ ,ｆｕｎｇｉｃｉｄｅａｎｄａｓｈｏｍｏｇｅｎｅｏｕｓｃａｔａｌｙｓｔｓｉｎｉｎｄｕｓｔｒｙ .1 6Ｉｎｏｒｄｅｒｔｏｅｘｐｌｏｒｅｔｈｅｒｅｌａｔｉｏｎｓｈｉｐｓｂｅｔｗｅｅｎｂｉｏｌｏｇｉｃａｌａｃｔｉｖ ｉｔｙａｎｄｓｔｒｕｃｔｕｒｅ ,ａｎｕｍｂｅｒｏｆｓｕｃｈｍｏｌｅｃｕｌｅｓｈａｖｅｂｅｅｎｓｙｎｔｈｅｓｉｚｅｄａｎｄｓｔｕｄｉｅｄｉｎｒｅｃｅｎｔｙｅａｒｓ .7 15Ｓｔｕｄｉｅｓｏｎ…     

三苯基锡(Ⅳ)荒酸盐Ph3SnS2CN(C2H5)2的波谱及结构研究

合成了三苯基锡(Ⅳ)Ⅳ，Ⅳ-二乙基荒酸盐。通过元素分析、红外光谱和核磁共振氢谱对其结构进行了表征。用X-射线单晶衍射测定了该化合物的晶体结构；结果表明，化合物中锡原子呈五配位畸变三角双锥构型。     

Synthesis and mesomorphic properties of n-butyl-4- [4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates

A homologous series of n-butyl-4-[4-((4-n-alkoxyl-tetrafluorophenyl)ethynyl)benzyloxy]benzoates have been synthesized.Their phase transition temperatures have also measured by polarizing textural observation and confirmed by DSC.     

杂化能带与电子-声子耦合的本征上限

本文用角动量分波表象的能带论方法研究了杂化导带的一般性质。得出了电子态密度和分波含量的一般关系式。发现引用一个径向波函数φ_l的“相位函数”y_l,可以方便地对球对称势场造成的相移和φ_l的对数微商作解析近似处理。在此基础上研究了电子-声子耦合中的系数η的性质。论证了η有一个“本征上限”,并估计了它的量级。讨论了影响η强弱的一般规律,与实验现象作了比较。指出提高导带角动量杂化程度,特别是提高d导带中的f分波含量,以至试图实现似f导带,可能是强化电子-声子耦合潜力较大的探索方向。 关键词：     

掺溴聚-4-甲基-1-戊烯的合成研究

 液溴与聚-4-甲基-1-戊烯（PMP）的四氯化碳溶液反应，在光照条件下得到溴代PMP，通过红外与元素分析确证了其结构。并通过热重分析对其性能进行了初步的研究。研究发现，在光照条件下溴原子很容易与PMP中叔丁基上的氢原子发生取代反应，得到化学掺杂溴原子的聚合物。该聚合物在150℃以下比较稳定，在150℃以上就会失去HBr。采用此种方法，可得到掺杂均匀的低密度材料。     

退火温度对KDP晶体光学均匀性的影响研究

 研究了磷酸二氢钾（KDP）晶体热退火前后光学均匀性的变化，发现适当温度下退火可以降低KDP晶体的内应力，提高晶体的消光比，从而提高晶体的光学均匀性。实验证明，50℃下退火即可消除部分内应力，110℃下退火可以消除生长鬼影和鬼线。但是,退火温度太高（如170℃）,也可能使晶体的均匀性降低。     

神光-Ⅱ装置三倍频实验中靶场单元技术的改进

 主要介绍为了满足神光-Ⅱ高功率激光装置三倍频光（351nm，3ω）的物理实验要求，靶场三倍频模拟光源和瞄准监视系统两个主要单元技术的改进，即三倍频模拟光源由基频光（1 053nm，3ω）通过腔外的KTP+BBO晶体倍频获得，再经八路分光系统和主激光耦合；瞄准监视系统由透射式光学系统改进为反射式光学系统，避免原系统存在较大的色差，提高瞄准精度。     

The Discrete Subgroups and Jфrgensen’s Inequality for SL(m,Cp)

In this paper, we give discreteness criteria of subgroups of the special linear group on Qp or Cp in two and higher dimensions. J rgensen's inequality gives a necessary condition for a nonelementary group of Mbius transformations to be discrete. We give a version of Jфrgensen's inequality for SL(m, Cp).     

Ignition and burning behaviors of automobile oil in engine compartment

Accidental leakage of automobile oils is of great inclination to initiate pool fires in engine compartment, with threats to induce the flashover of other components and flame penetration into the passenger compartment. This paper presents experimental results of the ignition and burning behaviors of a kind of automobile oils (automatic transmission oil) using a cone calorimeter. Measurements of oil temperature, ignition time, mass loss and heat release rate are performed at different external heat fluxes and initial fuel depths. The comparison between experimental and numerical oil temperature evolutions shows that the variations of the ignition time at different experimental conditions depend on the heat dissipation process inside the liquid phase. The steady mass burning rate is nearly independent of initial fuel depth and has a linear relation with external heat fluxes. In addition, the results indicate an increase in peak heat release rate by a large margin initially, followed by a relatively small margin under thicker initial fuel depths, while its variations are proportional to external heat fluxes. Correlations are also developed to determine the peak heat release rate as a function of the initial fuel depth.

     

Single-axis ultrasound levitation system with annular clamping forces

Based on the principle of acoustic levitation,a single-axis ultrasonic levitation system(SAULS) with convex sides was designed.A normal SAULS only provides a levitation force(LF) against the gravity of the sample.While,such systems also provide an annular clamping force(ACF) surrounding the levitated samples,and improve levitation stability of samples in the standing wave field.Using the finite-difference time-domain method,we investigated the force distributions in different resonance cavities and the factors that influence the magnitude of the levitation force in optimizing the SAULS and the ACF.The theoretical analyses and experimental results indicate that the stability of levitation in this special SAULS is improved with the ACF from its designed convex-side feature.It can be developed into a simple device in levitating and moving samples steadily in related experiments and applications.