Studies on ion association. Calorimetric study of the formation of monoazido complexes of Ni(II), Zn(II) and Cd(II)

From rehydration experiments the hydrates Ba(OH)₂ · 8 H₂O, Ba(OH)₂ · 3 H₂O β-Ba(OH)₂, · 1 H₂O, and γ-Ba(OH)₂ · 1 H₂O have been found in the system Ba(OH)₂-H₂O. Thermoanalytical measurements (DTA, TG, DTG, high temperature X-ray diffraction, high temperature Raman scattering) on these hydrates are reported. Thermal decomposition of Ba(OH)₂ · 8 H₂O and Ba(OH)₂ · 3 H₂O always results in the formation of β-Ba(OH)₂ · 1 H₂O, the stable form of the monohydrates at ambient temperature. Dehydration of β- and γ-Ba(OH)₂ · 1 H₂O, both of which form anhydrous β-Ba(OH)₂ as the first product of decomposition, starts at 105 and 115°C, respectively. Single crystals of Ba(OH)₂ · 3 H₂O and γ-Ba(OH)₂ · 1 H₂O were prepared from Ba(OH)₂ · 8 H₂O meltings and from ethanolic solutions of Ba(OH)₂ , respectively. The crystal data are: Ba(OH)₂ · 3 H₂O (orthorhombic, Pnma): a = 764.0(2), b = 1140,3(5), c = 596.5(1) pm, Z = 4; γ-Ba(OH)₂ · 1 H₂O (monoclinic, P2₁/m or P2₁): a = 704.9(2), b = 418.4(1), c = 633.3(1) pm, β = 111.45(2)°, Z = 2.     

The determination of molybdenum and tungsten in sea and surface water

A simple method for the determination of molybdenum and tungsten in sea and surface water is presented. Molybdenum and tungsten are concentrated on activated charcoal by adsorption as the ammonium pyrrolidine dithiocarbamate complex; the optimal pH for adsorption is 1.3. Mo and W are then determined by thermal neutron activation, forming ⁹⁹Mo (T_{$\text{1}\text{2}$} = 66.7 h) and ¹³⁷W (T_{$\text{1}\text{2}$} = 23.8 h), respectively. The ^99mTc daughter of ⁹⁹Mo is measured as soon as the equilibrium between ^99mTc(T_{$\text{1}\text{2}$}= 6 h) and ⁹⁹Mo is established. The detection limits are 0.05 μg Mo l^-1 and 0.05 μg W l^-1 (or 0.001 μg W l^-1 after a simple chemical separation).     

A carbazole-based polymeric azodye

A new polymeric azodye has been synthesized from carbazole by diazotization of its derivative N-methylcarbazole-3,6-diamine and subsequent coupling reaction with 2,2-bis(4-hydroxyphenyl-3-sulfonate-Na)-propane prepared from bisphenol-A. Its physico-chemical, electrical, and thermal properties have been characterized; finally, its application to the preparation of colored semiconductive films from polyvinyl alcohol has been studied.     

Acidic peroxo salts. A new class of initiators for vinyl polymerization. I. Kinetics of polymerization of acrylonitrile initiated by potassium monopersulfate catalyzed by Ag(I)

The kinetics of polymerization of acrylonitrile initiated by KHSO₅ and catalyzed by Ag(I) have been investigated in an aqueous medium over the temperature range of 35–50°C. The rates of polymerization R_p have been calculated and studied with respect to monomer and initiator. The catalytic activity of various metal ions on the initiator has been determined from a comparison of R_p values. The effects of monomer, catalyst, neutral salts, various amines, and inhibitor (hydroquinone) on the initial rate as well as maximum conversion have been studied. From the kinetics results a suitable reaction scheme has been proposed.     

Separation of molybdenum from tungsten with di(2-ethylhexyl)-phosphoric acid ac extractant

The use of di(2-ethylhexyl)phosphoric acid (HDEHP) as an extractant for the separation of molybdenum from tungsten was examined with the help of molybdenum-99 and tungsten-187 as radiotracers. Effective separation was obtained when the aqueous phase contained phosphoric acid at pH 0.8–2 or pH 3–3.5, depending on the amounts of metal. The method is applicable to both tracer and milligram amounts of molybdenum. The structure of the extracted species was examined by infrared spectroscopy.     

Studies on the exchange characteristics of [Co(NH3)6]3+ in amberlite IRC-50

Summary The exchange of Co(NH₃)₆]³⁺-ions on amberlite IRC-50 resin has been studied at room temperature. For this exchange process the cations are effective in the order: Cs⁺<Rb⁺<K⁺<Na⁺<Li⁺<NH₄ ⁺<Mg²⁺ <Ca²⁺<H⁺ and (C₂H₅)₄N<(CH₃)₄N⁺ ≪Cetyltrimethylammonium-ion <Cetylpyridinium-ion. The logarithm of the selectivity coefficient gives linear graphs when plotted against the radius of the hydrated ions or the reciprocals of theDebye-Hückel parameter?.     

Studies of carbazole-based polyarylates

A low temperature solution condensation method with pyridine as acceptor-catalytic reagent was applied to the synthesis of polyarylates from carbazole and bisphenol A/phenolphthalein. The polyarylates were classified with respect to their structure, thermal stability, and dielectric behavior.     

Thermodynamics of silver—silver halide electrodes and thermodynamic solubility products of silver halides in glycerol + water mixtures at different temperatures

The standard potentials of silver—silver bromide and silver—silver iodide electrodes in glycerol+water mixtures containing 5, 10, 20 and 30 wt% glycerol were determined from electromotive force measurements of the cell Ag(s), AgX(s), KX(c)//KCl(c), AgCl(s), Ag(s), where X is Br or I, at seven different temperatures in the range 5–35°C. The standard potentials in each solvent are represented as a function of temperature. The standard thermodynamic functions for the electrode reactions, the primary medium effects of various solvents upon X⁻, and the standard thermodynamic quantities for the transfer of 1 g-ion of X⁻ from water to the respective glycerol + water media are evaluated and discussed in the light of ion—solvent interactions as well as the structural changes of the solvents. From the values of the Ag/Ag⁺ and Ag/AgX, X⁻ electrodes, the thermodynamic solubility product constants of silver chloride, silver bromide and silver iodide have been determined in glycerol + water solvent mixtures at different temperatures.