High loading LiFePO<Subscript>4</Subscript> on activated carbon fiber cloth as a high capacity cathode for Li-ion battery

The LiFePO₄/carbon fiber (LFP/CF) cathodes were prepared by using activated carbon fiber cloth as current collector in place of conventional Al foil. The electrochemical properties of LFP/CF electrodes were analyzed by the cyclic voltammetry and galvanostatic charge/discharge tests. The results indicate that the activated carbon fiber cloth with high specific surface area and high porosity makes the LFP/CF electrode that possesses higher mass loading of 18–21 mg cm^–2 and stronger redox reaction ability compared with Al foil-based electrode. The LFP/CF electrode shows excellent rate performance and cycle stability. At 0.1C, the discharge capacity is up to 190.1 mAh g^–1 that exceeds the theoretical capacity due to the combination effect of battery and capacitor. Furthermore, the LFP/CF electrode shows an initial capacity of 150.4 mAh g^–1 at 1C with a capacity retention of 74.7% after 425 cycles, which is higher than 62.4% for LFP/Al foil electrode, and an initial discharge capacity of 130 mAh g^–1 at 5C with a capacity retention of 61.5% after 370 cycles. But this composite electrode is not suitable for charging/discharging at higher rate as 10C due to too much mass loading.     

A sol-gel derived pH-responsive bovine serum albumin molecularly imprinted poly(ionic liquids) on the surface of multiwall carbon nanotubes

A pH-responsive surface molecularly imprinted poly(ionic liquids) (MIPILs) was prepared on the surface of multiwall carbon nanotubes (MWCNTs) by a sol-gel technique. The material was synthesized using a 3-aminopropyl triethoxysilane modified multiwall carbon nanotube (MWCNT-APTES) as the substrate, bovine serum albumin (BSA) as the template molecule, an alkoxy-functionalized IL 1-(3-trimethoxysilyl propyl)-3-methyl imidazolium chloride ([TMSPMIM]Cl) as both the functional monomer and the sol-gel catalyst, and tetraethoxysilane (TEOS) as the crosslinking agent. The molecular interaction between BSA and [TMSPMIM]Cl was quantitatively evaluated by UV–vis spectroscopy prior to polymerization so as to identify an optimal template/monomer ratio and the most suitable pH value for the preparation of the MWCNTs@BSA-MIPILs. This strategy was found to be effective to overcome the problems of trial-and-error protocol in molecular imprinting. The optimum synthesis conditions were as follows: template/monomer ratio 7:20, crosslinking agent content 2.0–2.5 mL, temperature 4 °C and pH 8.9 Tris–HCl buffer. The influence of incubation pH on adsorption was also studied. The result showed that the imprinting effect and selectivity improved significantly with increasing incubation pH from 7.7 to 9.9. This is mainly because the non-specific binding from electrostatic and hydrogen bonding interactions decreased greatly with the increase of pH value, which made the specific binding affinity from shape selectivity strengthened instead. The polymers synthesized under the optimal conditions were then characterized by BET surface area measurement, FTIR, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The adsorption capacity, imprinting effect, selective recognition and reusability were also evaluated. The as-prepared MWCNTs@BSA-MIPILs were also found to have a number of advantages including high surface area (134.2 m² g⁻¹), high adsorption capacity (55.52 mg g⁻¹), excellent imprinting effect (imprinting factor of up to 5.84), strong selectivity (selectivity factor of 2.61 and 5.63 for human serum albumin and bovine hemoglobin, respectively), and good reusability.     

Mass spectrometry-guided isolation of two new benzoquinoline alkaloids from Macleaya cordata

Two new alkaloids, named 2,3-methylenedioxy-7,10-dimethyl-7,8,9,10-tetrahydro-benzoquinoline (1) and 2,3-methylenedioxy-7,10-dimethyl-8-carboxyl-benzoquinoline (2), were detected primarily from the fruits of Macleaya cordata by their different fragmentation pathways. And then isolation of the two compounds was performed by column chromatography and preparative HPLC under the guiding of mass spectrometry. Finally, their structures were determined by spectroscopic analysis.     

A new veratramine alkaloid from the bulbs of Fritillaria hupehensis

A new highly conjugated alkaloid of veratramine type, 225,25S,5α-veratramine-7(8),12(14)-diene-3β,13β,23β-triol-6-one (1), was isolated from the bulbs of Fritillaria hupehensis Hsiao et K.C. Hsia. Its structure was determined on the basis of spectroscopic evidences.     

Squeezing a helium nanodroplet with a Rydberg electron

We have investigated, by means of density functional theory, the structure of a "scolium", that is, an electron circulating around a positively charged 4He nanodroplet, temporarily prevented from neutralization by the helium-electron repulsion. The positive ion core resides in the center of the nanodroplet where, as a consequence of electrostriction, a strong increase in the helium density with respect to its bulk value occurs. The electron enveloping the 4He cluster exerts an additional electrostatic pressure which further increases the local 4He density around the ion core. We argue that under such pressure, sufficiently small 4He nanodroplets may turn solid. The stability of a scolium with respect to electron-ion recombination is investigated.     

A pyrazolate-supported Fe(3)(mu(3)-O) core: structural, spectroscopic, electrochemical, and magnetic study

A comparison is made between the structural, spectroscopic, electrochemical, and magnetic properties of pyrazolate versus carboxylate complexes [Fe3(mu3(mu3O)(mu-LL)6Cl3]2- containing the Fe3(mu3-O)-motif. While the Fe3(mu3-O)-cores are structurally indistinguishable in the two types of complexes, their magnetic properties deviate from the expected values as a result of a through-pyrazole contribution to the overall antiferromagnetic exchange with J1/hc = -80.1 cm(-1) and J2/hc = -72.4 cm(-1), or J1/hc = 70.6 cm(-1) and J2/hc = -80.8 cm(-1), (Hex = -J1(S1S2 + S2S3) - J2S1S3). The magnetic properties of the pyrazolate complexes are further tuned by an antisymmetric exchange interaction term.     

A new alkaloid from Lycoris aurea

A new alkaloid was isolated from the bulbs of Lycoris aurea(L'Herit.) Herb.Its structure was established as 3-o-ethyltazettinol through chemical and spectroscopic studies including 2D NMR.     

An enzyme-linked immunometric assay for cortisol based on idiotype-anti-idiotype reactions

Cortisol levels in body fluids are useful for monitoring the function of the pituitary-adrenal axis. Here, we established an “enzyme-linked immunometric assay” (a noncompetitive-type ELISA) for cortisol based on idiotype-anti-idiotype reactions. Six different anti-idiotype monoclonal antibodies that recognized the variable regions of a newly established anti-cortisol antibody were generated using hybridoma technology; these were two β-type and four α-type anti-idiotype antibodies, recognizing the paratope and framework regions, respectively. An immunometric assay was established using a combination of a selected α-type and a selected β-type antibody. The analyte (cortisol) was captured by an excess amount of anti-cortisol antibody immobilized on microplates, and the unoccupied paratope was saturated with the β-type antibody. Hapten-occupied anti-cortisol antibody, with less steric hindrance, was then selectively bound by the α-type antibody, labeled with biotin. The amount of biotin residue on the microplates was colorimetrically monitored using a peroxidase-labeled streptavidin. This assay had an approximately threefold higher sensitivity (detection limit: 90 pg = 248 fmol cortisol) than a competitive ELISA using the same anti-cortisol antibody, as well as a practical specificity for providing reasonable determination of normal urinary cortisol levels.     

The facile synthesis of benzothiazolylideneacetates and 1,4-benzothiazines through a highly controllable oxidation of benzothiazolylacetates

The synthesis of benzothiazolylideneacetates and 1,4-benzothiazine was found to be highly controllable via simple exchange of corresponding oxidants. It turned out that the treatment of benzothiazolylacetates with m-CPBA gave 1,4-benzothiazines via oxidative ring expansion process, and with DDQ gave benzothiazolylideneacetates via dehydrogenation, in good yield, respectively. The structures of both skeletons were confirmed by their X-ray diffractions. A previously reported method for the synthesis of benzothiazolylideneacetates was thus proved to be incorrect.