Diode-pumped Nd:YVO<Subscript>4</Subscript>/Nd:YLF laser at 488 nm

We present a laser architecture to obtain continuous-wave blue radiation at 488 nm. A 808 nm diode-pumped the Nd:YVO₄ crystal emitting at 914 nm. A part of the pump power was then absorbed by the Nd:YVO₄ crystal. The remaining was used to pump the Nd:YLiF₄ (Nd:YLF) crystal emitting at 1047 nm. Intracavity sum-frequency mixing at 914 and 1047 nm was then realized in a BiB₃O₆ (BiBO) crystal to reach the blue radiation. We obtained a continuous-wave output power of 339 mW at 488 nm with a pump laser diode emitting 18.3 W at 808 nm.     

Interaction of Short Laser Pulses in Wavelength Range from Infrared to X‐ray with Metals,Semiconductors, and Dielectrics

Laser‐matter interaction is defined by an electronic band structure of condensed matter and frequency ω_L of electromagnetic radiation. In the range of moderate fluences, the energy absorbed by electrons from radiation finally thermalizes in the ion thermal energy. The thermalization processes are different for optical as compared with X‐ray quanta and for metals relative to semiconductors and dielectrics, since the light absorption and electron‐electron, electron‐ion dynamics are sensitive to the electron population in a conduction band and the width of a forbidden gap. Although the thermalization processes are different, the final state is simply a heated matter. Laser heating creates powerful stresses in a target if duration of a laser pulse τ_L is short in acoustic time scale. Nucleation and material removal take place under such stresses. Such way of removal is called here the spallative ablation. Thus the spallative ablation is an ablation mechanism universally important for qualitatively different materials and quanta (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Luminescence and scintillation of Eu2+‐doped high silica glass

High silica glass doped with Eu²⁺ ions was prepared as a scintillating material by impregnation of Eu ions into a porous silica glass followed by reduction sintering in CO atmosphere. A dominant emission band of the Eu²⁺ 5d–4f transition peaking around 430 nm was observed in the luminescence spectrum with the excitation peak around 280 nm and no emission from Eu³⁺ was present. Photoluminescence decay kinetics was governed by decay times of a few microseconds. The Eu²⁺‐doped high silica glass exhibited comparable energy resolution and slightly higher photoelectron yield with respect to the Bi₄Ge₃O₁₂ crystal in the pulse height spectra for X‐ray photon energies within 22–60 keV. Furthermore, a factor of 1.2 higher radioluminescence intensity was observed as well. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Entangling different degrees of freedom by quadrature squeezing cylindrically polarized modes

Quantum systems such as, for example, photons, atoms, or Bose-Einstein condensates, prepared in complex states where entanglement between distinct degrees of freedom is present, may display several intriguing features. In this Letter we introduce the concept of such complex quantum states for intense beams of light by exploiting the properties of cylindrically polarized modes. We show that already in a classical picture the spatial and polarization field variables of these modes cannot be factorized. Theoretically it is proven that by quadrature squeezing cylindrically polarized modes one generates entanglement between these two different degrees of freedom. Experimentally we demonstrate amplitude squeezing of an azimuthally polarized mode by exploiting the nonlinear Kerr effect in a specially tailored photonic crystal fiber. These results display that such novel continuous-variable entangled systems can, in principle, be realized.     

Fiber in-line Mach-Zehnder interferometer constructed by selective infiltration of two air holes in photonic crystal fiber

A fiber in-line Mach-Zehnder interferometer is fabricated through selective infiltrating of two adjacent air holes of the innermost layer in the solid core photonic crystal fiber, assisted by femtosecond laser micromachining. The liquid infiltrated has higher refractive index than that of the background silica, and, hence, the two rods created can support a guide mode with lower effective refractive index than that of silica. The interference is produced by the fiber fundamental mode and the guide mode. The free spectral range (FSR) of the interferometer is found to be dependent on the photonic crystal fiber length, and a large FSR corresponds to a short photonic crystal fiber length. Such an interferometer device is robust and exhibits extremely high temperature sensitivity (～7.3?nm/°C for the photonic crystal fiber length of 3.4?cm) and flexible operation capability.     

Semi-fragile spatial watermarking based on local binary pattern operators

Local binary pattern (LBP) operators, which measure the local contrast within a pixel's neighborhood, have been successfully applied to texture analysis, visual inspection, and image retrieval. In the paper, we present a novel semi-fragile spatial watermarking method based on LBP operators by using the local pixel contrast for the embedding and extraction of watermarks. We also propose a general framework for multi-level image watermarking. Experimental results show that the proposed watermarking methods are robust against commonly-used image processing operations, such as additive noise, luminance change, contrast adjustment, color balance, and JPEG compression. At the same time, they achieve good invisibility, fragility, and image tamper detection and localization with less computational cost.     

Critical current density and vortex dynamics in uranium irradiated Co-doped BaFe2As2

We report the effect of defects introduced by heavy-ion irradiation with 2.6 GeV uranium ions at several matching fields in single crystalline Ba(Fe_0.925Co_0.075)₂As₂. The suppression rate of T_c at lower matching fields is larger than that at higher matching fields. The critical current density calculated from magnetic hysteresis loop is enhanced up to 4.1 × 10⁶ A/cm² at 2 K. Clear dips in magnetic hysteresis loops near zero field are observed at high matching fields. Field dependence of normalized relaxation rate is suppressed, and the relationship between the dip and the relaxation rate is discussed.     

Effect of fluorine doping on phase formation and properties of Bi(Pb)-2223 ceramics

Superconducting ceramics of Bi_1.6Pb_0.4Sr₂Ca₂Cu₃O_yF_x (x = 0–0.6) are prepared in air by conventional solid state reaction and characterized. The study shows that the melting point of the samples decreases as fluorine content increases. As a consequence, the grain size increases with the doping level and for x = 0.6, the sample is completely deformed and presents a concave shape making impossible the measurements on it. The Vickers microhardness reaches its maximum for x = 0.2. The analysis of the X-ray diffraction results reveals that all the samples are composed of only Bi(Pb)-2212 and Bi(Pb)-2223 phases. The highest proportion of the high T_c phase (Bi(Pb)-2223) is also observed for x = 0.2 and is about 67.32%. The refinement of cell parameters is done by considering the structural modulation. The results show that the doping leads to a reduction of cell volume as well as the a axis component of modulation. From resistivity versus temperature measurements, it is shown that the doped phases exhibit higher onset critical transition temperatures than the undoped one. The residual resistivity increases with fluorine content suggesting that the doping introduces structural defects and disorder into the samples. The obtained critical current density at 77 K under zero magnetic field also increases with fluorine doping.