Synthesis and Thermolysis of the Homoleptic Iron(II) Complex [Fe{cyclo‐(P5tBu4)}2]

Na[cyclo‐(P₅tBu₄)] ( 1 ) reacts with [FeBr₂(CO)₄] (2:1) to give the first homoleptic iron(II) complex [Fe{cyclo‐(P₅tBu₄)}₂] ( 2 ) containing two tridentate cyclo‐(P₅tBu₄)^– ligands. Thermolysis of 2 up to 500 °C produces a new phosphorus‐rich iron phosphide, calculated as FeP₆ according to the mass change.     

Development of Plasma Window for gas charge stripper at RIKEN RIBF

A differential pumping system with a Plasma Window (PW) has been developed for an application to a window-less He gas charge stripper. A PW with Southern Methodist University design was newly fabricated and tested off-line for evaluation of differential pumping efficiency. Switching gases for plasma seed from Ar to He was tested. It was found that the PW reduced the pressure at the first differential pumping section to 1/13 for Ar and to 1/17 for He, comparing with differential pumping without PW. At the second pumping section, the pressures were drastically reduced to 1/160 and to 1/4,520 for Ar and He, respectively. These pressure reduction factors indicate that one differentially pumped stage could be removed from a conventional differential pumping system.     

Characterization of long-term dose stability of N-isopropylacrylamide polymer gel dosimetry

In this study, the detailed characteristics, including spatial uniformity, dose distributions, inter-batch variability, reproducibility, and long-term temporal stability, of N-isopropylacrylamide (NIPAM) polymer gel dosimeter were investigated. A commercial 10x fast optical computed tomography scanner (OCTOPUS^TM-10×, MGS Research, Inc., Madison, CT, USA) was used to measure NIPAM polymer gel dosimeter. A cylindrical NIPAM gel phantom that measured 10 cm × 10 cm was irradiated via a single-field treatment plan with a field size of 4 cm × 4 cm. The maximum standard deviation of spatial uniformity for NIPAM gel was less than 0.29 %. The average standard deviation among the three batches of gel dosimeters was less than 1 %. The gamma pass rate could reach as high as 96.76 % when a 3 % dose difference and a 3 mm dose-to-agreement criteria were used. The long-term measurement of irradiated NIPAM gel dosimeter indicated that the dose maps attained a gradually stable value 15 h post-irradiation and remained stable until 72 h post-irradiation. The gamma pass rate could achieve a maximum value between 24 and 72 h post-irradiation. The edge enhancement effect that occurred around the irradiated region was observed 72 h post-irradiation. Thus, the results from this study suggest that NIPAM gel dosimeter should be measured approximately 24 h post-irradiation to reduce the occurrence of the edge enhancement effect.     

Application of liquid chromatography quadrupole time-of-flight mass spectrometry to the identification of acetamiprid transformation products generated under oxidative processes in different water matrices

This work allowed the identification of major transformation products (TPs) of acetamiprid (ACTM) during Fenton process. Acetamiprid is a chloronicotinoid insecticide widely used around the world for its characteristics (high insecticidal activity, good systemic properties, suitable field stability, etc.). The degradation of the parent molecule and the identification of the main TPs were evaluated in different water matrices (demineralized water and real agro-food industrial wastewater). TPs of acetamiprid generated by Fenton experiments were monitored and identified by liquid chromatography quadrupole time-of-flight tandem mass spectrometry (LC–QTOF–MS/MS). Up to 14 TPs were characterized based on the accurate mass of the molecular ion and fragment ions obtained in both full-scan and MS/MS modes. Most of them were eliminated after 75 min of treatment time in demineralized water. However, in real agro-food industrial wastewater, most of them were eliminated at 90 min of treatment time, demonstrating the influence of the matrix composition on the studied compound degradation.     

Development and validation of a sensitive thermal desorption–gas chromatography–mass spectrometry (TD-GC-MS) method for the determination of phosgene in air samples

A new rapid, sensitive and reliable method was developed for the determination of phosgene in air samples using thermal desorption (TD) followed by gas chromatography–mass spectrometry (GC-MS). The method is based on a fast (10 min) active sampling of only 1 L of air onto a Tenax® GR tube doped with 0.5 mL of derivatizing mixture containing dimercaptotoluene and triethylamine in hexane solution. Validation of the TD-GC-MS method showed a low limit of detection (40 ppbv), acceptable repeatability, intermediate fidelity (relative standard deviation within 12 %) and excellent accuracy (>95 %). Linearity was demonstrated for two concentration ranges (0.04 to 2.5 ppmv and 2.5 to 10 ppmv) owing to variation of derivatization recovery between low and high concentration levels. Due to its simple on-site implementation and its close similarity with recommended operating procedure (ROP) for chemical warfare agents vapour sampling, the method is particularly useful in the process of verification of the Chemical Weapons Convention.

Syngas production by biogas reforming over the Co-based multicomponent catalysts

The new multicomponent Co-based catalysts with additives of group 8 metal and rare earth elements and supported on alumina have been tested in the dry and steam conversion of a model biogas. The processes were carried out in a flow quartz reactor under the following conditions: atmospheric pressure, a gas hourly space velocity of 1000 h^?1 and temperatures of 300–800°C. The catalysts were characterised using electron microscopy, BET and X-ray analysis. The methane is almost completely converted in the dry reforming of biogas at T≤800°C. Synthesis gas with a ratio of H₂/CO>1.0 is a main product of biogas reforming over the multicomponent catalysts studied. Adding steam in a feed composition increases both the methane conversion and the hydrogen yield at lower temperatures. Almost complete methane conversion occurs at T<750°C in the steam reforming of biogas. The catalysts are highly effective and exhibit stable activity throughout 100 h of continuous testing.      

Spatially‐resolved and polarized Raman scattering from a single Si nanowire

We report spatially‐resolved and polarized Raman scattering results from a single Si nanowire (NW). Transmission electron microscope images show that the surface morphology of the Si NW varies from smooth to rough along the long axis. As the NW grows, the smooth surface becomes rough because of Au diffusion to the surface, resulting in the formation of facets and stacking faults. Spatially‐resolved Raman spectra along the NW long axis reveal variations in tensile strain related to the morphological changes in NW surface. The tensile strain in the top segment of the NW with a smooth surface is greater than that in the bottom segment with a rough surface. Despite the formation of facets and stacking faults, polarized Raman scattering results both from the top and bottom segments of the NW are consistent with the Raman polarization selection rules expected for a cubic crystal. Copyright © 2015 John Wiley & Sons, Ltd.     

Generation of sub‐terahertz repetition rates from a monolithic self‐mode‐locked laser coupled with an external Fabry‐Perot cavity

A novel scheme to multiply the repetition rate of a monolithic self‐mode‐locked laser for generating sub‐terahertz pulse sources is successfully demonstrated. A coated Yb:KGW crystal is designed to achieve a self‐mode‐locked operation at a repetition rate of 24 GHz with an average output power exceeding 1.0 W at a pump power of 4.8 W. A partially reflective mirror is utilized to combine with the output surface of the gain medium to constitute an external Fabry‐Perot cavity. It is theoretically and experimentally verified that adjusting the external cavity length to satisfy the commensurate condition can lead to the frequency spacing to be various order harmonics of the mode spacing of the monolithic cavity. The maximum pulse repetition rate of the laser output can be up to 216 GHz and the pulse duration is as short as 330 fs. More importantly, the overall characteristics of the first‐order temporal autocorrelation traces obtained by sequentially scanning the external cavity.length display an intriguing phenomenon of temporally fractional revivals, similar to the feature of spatial Talbot revivals.

     

Finite element method for the vibration of cracked beams with varying cross section

Vibration analysis of cracked beams having linearly varying cross-sections both in thickness and width was investigated. A computer program using the finite element method has been written to find the dynamical characteristics (natural frequencies and mode shapes) of the cracked beam. The cracked section in the beam has been modeled by a massless spring whose flexibility depens on the local flexibility induced by the crack. The stiffness of spring has been derived from the linear elastic fracture mechanics theory as the inverse of the compliance matrix calculated using stress intensity factors and strain energy release rate expression. Some examples have been given to explain the proposed method and investigate the effects of the depth and location of cracks on the natural frequencies and mode shapes. The results of current study and those in the literature are compared and good agreements have been found. Consequently it is showed that proposed method is reliable and simple. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)