石墨烯/锌铁氧体复合物的制备及抗菌性能

用氧化还原法和化学共沉淀法分别制备了石墨烯(GE)和石墨烯/锌铁氧体(GE/ZnFe2O4)复合物,通过现代测试技术表征了样品的物相结构、组成和微观形貌.以大肠杆菌、金黄色葡萄球菌和白色念珠菌为测试菌种,分别对样品的抗菌性能进行了研究.结果表明,样品的抗菌活性受GE/ZnFe2O4复合物中GE和ZnFe2O4质量比(mG/Z)以及菌种的影响,其中mG/Z=0.4的复合物对三种菌均有较好的抗菌效果,其最小抑菌浓度分别为25、25和12.5μg/mL;复合物对白色念珠菌的抗菌效果最好,这与菌种的结构有关.此外,对样品的抗菌机理进行了详细研究.     

Rapid and efficient column separation of Re(VII) as a surrogate for Tc(VII) with benzimidazole-based cross-linked poly(ionic liquid)s

Journal of Radioanalytical and Nuclear Chemistry - In this study, the imidazole-based poly(ionic liquid)s (PILs) synthesized by one step method has been applied for the enrichment and recovery of...     

紫外光辐照下CH3NH3PbI3基钙钛矿太阳能电池失效机制

随着光伏产业的不断发展,有机无机杂化钙钛矿太阳能电池的研发成为科学与工业界广泛关注的焦点。到目前为止,其光电转换效率已经提高到了25.2%,成为替代硅基太阳能电池的核心方案之一。然而,钙钛矿太阳能电池的稳定性较差,容易受到环境中氧气、水分、温度甚至光照的影响,这严重制约了其大规模推广与应用。大量科学研究表明,如何避免紫外辐照下有机无机杂化钙钛矿太阳能电池的性能衰减,对于提高钙钛矿太阳能电池的光照稳定性至关重要。然而到目前为止,仍然没有系统的工作来对紫外辐照下钙钛矿太阳能电池性能以及微结构演化过程进行详细的表征与分析。本文中,我们利用聚焦离子束-扫描电子显微分析(FIB-SEM)以及球差校正透射电子显微分析(TEM)等技术,全面地研究了紫外辐照过程中有机无机杂化钙钛矿太阳能电池性能变化规律以及电池微结构演化特征。实验结果表明,紫外辐照过程中太阳能电池内部会形成0.5–0.6 V的内建电场,钙钛矿中的I^-离子在电场的驱动下向金属Au电极和空穴传输层2, 2’, 7, 7’-四[N, N-二(4-甲氧基苯基)氨基]-9, 9'-螺二芴(Spiro-OMeTAD)一侧迁移;随后,空穴传输层与金电极的界面处,碘离子与光生空穴一起与金电极发生反应,将金属态Au氧化成离子态Au⁺。而Au⁺离子则在内建电场的驱动下反向迁移穿过钙钛矿MAPbI₃层,直接被SnO₂和MAPbI₃界面处的电子还原形成金属Au纳米团簇。除此之外,紫外辐照过程中钙钛矿太阳能电池性能降低的同时,往往伴随着Spiro-OMeTAD与钙钛矿界面处物质迁移、钙钛矿薄膜内晶界展宽以及Au纳米颗粒周围MAPbI₃物相分解等现象。以上各种因素的协同作用,共同导致了紫外光照下有机无机杂化钙钛矿太阳能电池光电转换性能(PCE)、开路电压(V_oc)以及短路电流(J_sc)等性能参数的急剧下降。     

Metallaphotoredox⁃Catalyzed O⁃Arylation of Serine北大核心CSCD

A metallaphotoredox catalyzed hydroxyl aromatization of serine is developed to achieve rapid synthesis of aryl ethers of various serine derivatives. Under the catalytic system of ethylene glycol dimethyl ether nickel bromide （NiBr2 （dme））/4,4'-dimethoxy-2,2'-bipyridine/zinc powder and synergistic iridium photoredox catalysis, nickel is catalyzed and inserted into the C—Br bond, and then followed by transmetalation with the hydroxyl group of serine. The resulting Ni（Ⅱ）species are oxidized by the excited Ir（Ⅲ）species to a Ni（Ⅲ）intermediate. This intermediate is unstable and reductive elimination takes place rapidly to give the target product O-arylated serine in the yields from 65% to 39%. Through a metallaphotoredox catalysis strategy,the reaction features mild,efficient,clean and broad scope of substrate, providing a new way for the synthesis of various serine derivatives with medicinal value. © 2022, Science Press (China). All rights reserved.     

低共熔溶剂分散液液微萃取-悬浮固化-高效液相色谱法测定水产品中3种内分泌干扰物的含量北大核心CSCD

将癸酸和香叶醇在10 mL玻璃管中以2∶1的物质的量之比混合,然后将混合物在80℃水浴锅中加热,直至形成稳定的低共熔溶剂(DES)。该溶剂易合成、低成本、低毒性且具有高生物降解性,是一种新型的疏水性DES,可用于水产品中内分泌干扰物的微萃取。取已粉碎的水产品样品1 g和乙腈2 mL置于5 mL离心管中,以转速2 000 r·min^(-1)涡旋振荡3 min。取上清液400μL,经0.45μm滤膜过滤,滤液与100μL DES混合,并迅速注入装有5 mL 80 g·L^(-1)氯化钠溶液的10 mL离心管中,以完成DES的分散。将上述离心管以转速3 500 r·min^(-1)离心5 min,然后置于冰浴中进行固化。将固化后所得样品溶解于150μL甲醇中,以Eclipse Plus C;色谱柱为分离柱,以体积比90∶10的甲醇-水的混合液为流动相,在激发波长228 nm,发射波长305 nm处测定双酚A、4-叔辛基苯酚和壬基酚等3种内分泌干扰物的含量。结果表明,DES在冰浴中固化,可促进其从水溶液中分离,简单且快速,利于萃取剂的收集。3种内分泌干扰物的质量分数均在0.25~10μg·g^(-1)内与其对应的峰面积呈线性关系,检出限(3S/N)均为0.075μg·g^(-1)。用此法对空白加标样品进行测定,测定值的日内和日间相对标准偏差(n=5)均小于4.0%。以空白样品为基体进行加标回收试验,所得回收率为78.7%~91.6%。     

Solvent terminated natural deep eutectic solvent microextraction for concentration of curcuminoids in Curcumae Longae Rhizoma and turmeric tea

A novel solvent terminated microextraction method based on a natural deep eutectic solvent (L-menthol and lactic acid at a molar ratio of 1:2) coupled with high-performance liquid chromatography was proposed, which was utilized for the separation and enrichment of bisdemethoxycurcumin, demethoxycurcumin and curcumin in Curcumae Longae Rhizoma and turmeric tea. The effects of independent parameters on extraction efficiency were optimized by single-factor analysis. Subsequently, four predominated parameters affecting the extraction procedure, including extractant volume, salt concentration, demulsifier consumption, and demulsification time, were further evaluated by a central composite design. Under the optimized conditions, the linear ranges of calibration curves were 0.005–0.5 μg/mL for bisdemethoxycurcumin, 0.004–0.4 μg/mL for demethoxycurcumin, and 0.0045–0.45 μg/mL for curcumin, respectively. In addition, the developed method provided low detection limits (0.1–0.4 ng/mL) and high enrichment factors (279–350). Its intra-day and inter-day precision were carried out by relative standard deviation ranging from 2.2 to 9.2%. Finally, the applicability of this method was assessed by the analysis of Curcumae Longae Rhizoma and turmeric tea samples. The results showed that these samples were detected successfully and the spiked recoveries over the range of 85.3-108.9% with relative standard deviations of 1.6-8.9% were attained, indicating its high relative recoveries with good precision in real sample analysis.     

Tandem Synthesis of Tetrasubstituted NH Pyrroles from Simple Nitriles

An efficient tandem route to obtain tetrasubstituted NH pyrroles in a one-pot manner has been developed, staring from simple nitriles, ethyl bromoacetates, and zinc. This reaction involves oxidative dimerization of the zinc bromide complex of β-enaminoesters using cerium ammonium nitrate (CAN) as an oxidant, affording 2,3,4,5-tetrasubstituted pyrroles in yields up to 91%.     

Metal Sulfide Nanoparticle Synthesis with Ionic Liquids – State of the Art and Future Perspectives

Metal sulfides are among the most promising materials for a wide variety of technologically relevant applications ranging from energy to environment and beyond. Incidentally, ionic liquids (ILs) have been among the top research subjects for the same applications and also for inorganic materials synthesis. As a result, the exploitation of the peculiar properties of ILs for metal sulfide synthesis could provide attractive new avenues for the generation of new, highly specific metal sulfides for numerous applications. This article therefore describes current developments in metal sulfide nanoparticle synthesis as exemplified by a number of highlight examples. Moreover, the article demonstrates how ILs have been used in metal sulfide synthesis and discusses the benefits of using ILs over more traditional approaches. Finally, the article demonstrates some technological challenges and how ILs could be used to further advance the production and specific property engineering of metal sulfide nanomaterials, again based on a number of selected examples.     

Structural and Electronic Influences on Rates of Tertpyridine−Amine CoIII−H Formation During Catalytic H2 Evolution in an Aqueous Environment

In this work, the differences in catalytic performance for a series of Co hydrogen evolution catalysts with different pentadentate polypyridyl ligands (L), have been rationalized by examining elementary steps of the catalytic cycle using a combination of electrochemical and transient pulse radiolysis (PR) studies in aqueous solution. Solvolysis of the [Co^II−Cl]⁺ species results in the formation of [Co^II(κ⁴-L)(OH₂)]²⁺. Further reduction produces [Co^I(κ⁴-L)(OH₂)]⁺, which undergoes a rate-limiting structural rearrangement to [Co^I(κ⁵-L)]⁺ before being protonated to form [Co^III−H]²⁺. The rate of [Co^III−H]²⁺ formation is similar for all complexes in the series. Using E_1/2 values of various Co species and pK_a values of [Co^III−H]²⁺ estimated from PR experiments, we found that while the protonation of [Co^III−H]²⁺ is unfavorable, [Co^II−H]⁺ reacts with protons to produce H₂. The catalytic activity for H₂ evolution tracks the hydricity of the [Co^II−H]⁺ intermediate.