Tm3+/Yb3+共掺铋碲酸盐玻璃中的高效蓝色上转换荧光

制备了高折射率Tm3+/Yb3+共掺杂铋碲酸盐玻璃,利用棱镜耦合法测量出玻璃在632.8和1550 nm波长处的折射率分别为2.0365和1.9795. 对玻璃的吸收、荧光和红外透过光谱展开了测试与分析,根据Judd-Ofelt理论对吸收光谱进行拟合,求得Tm3+的振子强度参数Ωt(t=2,4,6)分别为3.90×10-20, 2.03×10-20和9.03×10-21 cm2,并进一步计算了Tm3+在玻璃中各能级跃迁的振子强度、自发辐射跃迁概率、辐射寿命和荧光分支比等光谱参数. 在980 nm激光激发下测得强的蓝色三光子上转换和近红外双光子上转换荧光. 宽的红外透过窗口、高的折射率和强的蓝色上转换荧光表明,Tm3+/Yb3+共掺铋碲酸盐玻璃有希望成为高效的上转换发光和激光材料.     

Study of passive Q-switching for flash-lamp-pumped 1.34-μm Nd:GdVO4 laser

The static laser performance of a-growth Nd:GdVO4 crystal (a-cut, 4 × 4 × 25 (mm)) at 1.34μm pumped by flash-lamp is investigated with different transmissions of output couplers. With the output coupler transmission of T = 30%, the static output energy of 148 mJ is obtained when the pump energy is 35.2 J,and the corresponding electric-optical conversion efficiency is 0.42%. The Q-switched output of lasers with the output wavelength ranging from 1.3 to 1.6 μm can be realized by using Co2+ :LaMgAl11O19 (Co:LMA)as saturable absorber. A flash-lamp-pumped, passively Q-switched Nd:GdVO4 laser with Co:LMA as saturable absorber is demonstrated in plano-concave laser cavity. With the cavity length of 16.3 cm and pump energy of 19.8 J, the single-pulse output energy, pulse width, and peak power are obtained to be 4m J, 80 ns, and 5 × 104 W, respectively.     

Demonstration of fiber-laser-produced plasma source and application to efficient extreme UV light generation

Efficient generation of extreme UV (EUV) light at lambda = 13.5 nm from a bulk Sn target has been demonstrated by using a fiber laser. The conversion efficiency from the 1064 nm IR to the EUV was measured to be around 0.9% into 2pi steradians within a 2% bandwidth. To the best of our knowledge, this is the first time an all-fiber system was used to generate EUV or soft x rays.     

光栅周期包含的Bragg层数对Bragg型凹面衍射光栅的影响

单个衍射光栅周期所包含的Bragg周期层数是连续Bragg齿型凹面衍射光栅的主要参数之一,该参数可改变光栅齿结构,对凹面衍射光栅的分辨力.自由光谱范围及衍射效率有重要影响.本文通过理论分析与仿真模拟,对比了4种不同层数的Bragg型凹面衍射光栅的特性参数.研究结果表明:在衍射光栅尺寸不变的情况下,改变单个光栅周期包含的Bragg周期层数不会显著提高器件主衍射级次的分辨力;单个光栅周期包含的Bragg周期层数与光栅可衍射的级次数成正相关.单周期层数的Bragg凹面衍射光栅的主衍射级次效率最高,其可衍射的级次数最少,且其他衍射级次分散的能量最少;增加单个光栅周期所包含的Bragg周期层数会降低主衍射级次的自由光谱范围.该研究对于设计低插损、高分辨率、宽工作波段的波分复用器或光栅光谱仪具有重要的指导意义.     

Deterministic Assisted Clone of an Arbitrary Two- and Three-qubit States via Multi-qubit Brown State

We present two schemes for deterministic assisted clone(DAC) of an unknown two- and three-qubit entangled states with assistance via muti-qubit Brown state. In the schemes, the sender wish to teleport an unknown original entangled state which from the state preparer, and then create a perfect copy of the unknown state at her place. The DAC schemes include two stages. The first stage requires teleportation with Bell-state measurements via a five-qubit Brown state(or seven-qubit Brown state) as the quantum channel. In the second stage, to help the sender realize the quantum cloning, the state preparer performs projective measurements on their own particles which from the sender, then the sender can acquire a perfect copy of the unknown state by means of some appropriate unitary operations. Furthermore, the total success probability for assisted cloning a perfect copy of the unknown state can reach 1 in our schemes.     

Hydrothermal synthesis of graphene oxide/multiwalled carbon nanotube/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> ternary nanocomposite for removal of Cu (II) and methylene blue

In this work, highly activated graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite adsorbent was prepared from a simple hydrothermal route by using ferrous sulfate as precursor. For this purpose, the graphene oxide/multiwalled carbon nanotube architectures were formed through the π-π attractions between them, followed by attaching Fe₃O₄ nanoparticles onto their surface. The structure and composition of as-prepared ternary nanocomposite were characterized by XRD, FTIR, XPS, SEM, TEM, Raman, TGA, and BET. It was found that the resultant porous graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite with large surface area could effectively prevent the π-π stacking interactions between graphene oxide nanosheets and greatly improve sorption sites on the surfaces. Thus, owing to the unique ternary nanocomposite architecture and synergistic effect among various components, as-prepared ternary nanocomposite exhibited high separation efficiency when they were used to remove the Cu (II) and methylene blue from aqueous solutions. Furthermore, the adsorption isotherms of ternary nanocomposite structures for Cu (II) and methylene blue removal fitted the Langmuir isotherm model. This work demonstrated that the graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite was promising as an efficient adsorbent for heavy metal ions and organic dye removal from wastewater in low concentration.     

高灵敏度区域中子监测仪探测效率曲线模拟

中子监测仪对不同能量中子的探测效率是其重要的性能指标,直接影响其测量值的可信度与使用效果。针对中国科学院高能物理研究所生产的高灵敏度区域中子监测仪（HANM型）,利用蒙特卡罗软件模拟其探测效率曲线,模拟结果表明该仪器探测效率随能量增加,先上升后下降,其探测效率最高值在1 MeV附近。通过改变模拟条件中的射线入射方向,对比探测效率曲线趋势变化,验证该型仪器的探测效率曲线趋势的可靠性。在此基础上,分别利用D-D,D-T加速器产生2.5 MeV和14 MeV单能中子,对探测效率曲线进行校准与验证,最终获得此型仪器的探测效率曲线。     

辐射成像系统模拟软件NUCRPD的研发与应用

在辐射成像系统的设计研发中,经常需要计算系统的各项物理性能指标。为了提升产品研发的效率,同方威视联合清华大学,基于蒙特卡罗程序包Geant4,研发了国内首套具有自主知识产权的辐射成像系统模拟软件NucRPD(NUCTECH Radiography Performance Design Tools),其能够快速、精确地模拟系统的各项性能指标。该软件对常用的一些辐射成像系统进行了参数化建模,用户通过修改软件界面上的少量参数,就可以快速建立各类辐射成像系统的几何体、源项、物理模型和统计量,然后在服务器上以并行计算方式完成模拟计算,能在较短的时间内模拟出系统的性能指标,并给出直观的图形帮助用户深入理解模拟结果。NucRPD的模拟结果经过了大量的实验验证,其剂量场分布和物理指标等模拟结果和实验结果符合得很好。NucRPD已经应用于同方威视辐射成像系统产品的设计研发,在产品的物理指标优化和辐射防护优化中发挥了重要作用。     

半导体中多光子吸收跃迁速率的全量子理论分析

本文从非线性光学中辐射跃迁速率的表达式出发,在全量子理论下,导出了半导体中任意阶多光子吸收跃迁速率的一般表达式。理论分析结果表明,n光子吸收跃迁速率与光强的n次方和n阶光子相干度成正比。本文在多能带及二能带理论模型下,对多光子吸收跃迁速率的一般表达式进行了化简,并对非线性相互作用项对跃迁速率的贡献,作了讨论。