Fabrication and characterization of CdS-sensitized TiO<Subscript>2</Subscript> nanotube photoelectrode

CdS quantum dot (Qd)-sensitized TiO₂ nanotube array photoelectrode is synthesised via a two-step method on tin-doped In₂O₃-coated (ITO) glass substrate. TiO₂ nanotube arrays are prepared in the ethylene glycol electrolyte solution by anodizing titanium films which are deposited on ITO glass substrate by radio frequency sputtering. Then, the CdS Qds are deposited on the nanotubes by successive ionic layer adsorption and reaction technique. The resulting nanotube arrays are characterized by scanning electron microscopy, X-ray diffraction (XRD) and UV–visible absorption spectroscopy. The length of the obtained nanotubes reaches 1.60 μm and their inner diameter and wall thickness are around 90 and 20 nm, respectively. The XRD results show that the as-prepared TiO₂ nanotubes array is amorphous, which are converted to anatase TiO₂ after annealed at 450 °C for 2 h. The CdS Qds deposited on the TiO₂ nanotubes shift the absorption edge of TiO₂ from 388 to 494 nm. The results show that the CdS-sensitized TiO₂ nanotubes array film can be used as the photoelectrode for solar cells.     

单室沉积非晶硅/非晶硅/微晶硅三叠层太阳电池的研究

在产业化比较成熟的单室沉积非晶硅薄膜太阳电池基础上,进行了非晶硅/非晶硅/微晶硅三叠层太阳电池性能优化的研究.在生产线上纯单室沉积的非晶硅/非晶硅叠层太阳电池基础上,通过调节n-p隧穿结并采用自行研制开发的单室微晶硅底电池的沉积路线,获得了单室沉积的光电转换效率达到9.52%的非晶硅/非晶硅/微晶硅三叠层太阳电池. 关键词： 硅基薄膜太阳电池 三叠层 微晶硅     

TiO基态 (X 3 Δr) 的势能函数与光谱常数

应用群论及原子分子反应静力学方法推导了TiO分子基态(X³Δ_r)的离解极限.采用不同的计算方法,包括密度泛函B3LYP,B3P86,BP86,B3PW91和MP2,MP4方法,结合不同基组计算了TiO分子基态的平衡核间距、能量和振动频率.研究表明,使用B3LYP方法,对O原子使用6-311+G基组,Ti原子使用6-311+ +G^**基组时计算得到的平衡几何结构、分子离解能和谐振频率与实验值符合得最好.使用优选出的方法和基组对T 关键词： TiO 势能函数 光谱常数 密度泛函理论     

Al2O3-Y2O3-ZrO2三相复合陶瓷的介电谱研究

采用传统的固相反应法,在1400–1500 ℃下烧结,制备得到Al₂O₃-Y₂O₃-ZrO₂三相复合陶瓷.样品的结构、形貌和电性能分别用X射线衍射(XRD)、扫描电子显微镜(SEM)及介电谱表征.XRD表明此三相复合体系无其他杂相,加入Y₂O₃及ZrO₂后使得Al₂O₃成瓷温度降低;SEM表明此体系晶粒直径为200–500 nm,并且样品随烧结温度的升高而变得更加致密,晶界更加清晰;介电损耗谱中出现峰值弛豫现象,根据Cole-Cole复阻抗谱得出其为非德拜弛豫. 关键词： 2O₃-Y₂O₃-ZrO₂三相陶瓷')" href="#">Al₂O₃-Y₂O₃-ZrO₂三相陶瓷 介电弛豫 阻抗谱 热导率     

Actively mode-locked dual-wavelength fiber laser with close wavelength spacing using a fiber Bragg grating

A simple actively mode-locked fiber ring laser is proposed and successfully demonstrated to generate dual-wavelength picosecond pulses with close wavelength spacing using one Bragg grating in standard single-mode fiber. The proposed laser can be made to operate in stable dual-wavelength at room temperature, due to the birefringence characteristic of the FBG induced by transverse strain. Transverse strain loading on the FBG allows the wavelength spacing to be controlled. Generation of stable dual-wavelength pulses with a pulsewidth of 212–234 ps and a tunable wavelength separation from 0.2 to 0.44 nm at a pulse rate of 1.05 GHz was demonstrated.     

Synthesis of single crystalline layered lithium manganese oxide nanorods

Single-crystalline layered lithium manganese oxide nanorods were prepared via a low-temperature molten salt synthesis method. The material was investigated by a variety of techniques, including X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectrum (XPS).     

用于X射线时空分辨测量的弯晶谱仪

为了测量激光聚变产生的0.2～0.37 nm范围内的等离子体X射线, 设计了一种基于空间和时间分辨的聚焦型弯晶谱仪. 将在700℃时弯曲后的LiF(2d＝0.403 nm)晶体作为色散元件, 布喇格衍射角的变化范围为30～67.5°, 弯晶粘贴在离心率和焦距分别为0.9586和1350 mm的椭圆形不锈钢基底上. 利用弯晶谱仪配X光CCD相机在星光Ⅱ激光(0.35 μm, 60～80J, 700 ps)装置上摄取了钛平面靶发射的X射线光谱, 实验结果表明它的光谱分辨率能达到0.001 nm.     

Multiple bosonic mode coupling in the electron self-energy of (La2-xSrx)CuO4

High resolution angle-resolved photoemission spectroscopy data along the (0,0)-(pi,pi) nodal direction with significantly improved statistics reveal fine structure in the electron self-energy of the underdoped (La2-xSrx)CuO4 samples in the normal state. Fine structure at energies of (40-46) meV and (58-63) meV, and possible fine structure at energies of (23-29) meV and (75-85) meV, have been identified. These observations indicate that, in (La2-xSrx)CuO4, more than one bosonic modes are involved in the coupling with electrons.     

Enhancement of magnetoresistances at room temperature in YSZ doping La0.67Sr0.33MnO3 system

The temperature dependence of the resistance of composite samples (1−x)La_0.67Sr_0.33MnO₃+xYSZ with different YSZ doping level x was investigated at magnetic fields 0-3 T, where YSZ represents yttria-stabilized zirconia. Results show that the YSZ dopant does not only adjust the metal-insulator transition temperature, but also increases the magnetoresistance effect. With increase of YSZ doping level for the range of x<2%, the metal-insulator transition temperature values T_P of the composites decrease, but T_P increases with increase of x further for the range of x>2%. Meanwhile, in the YSZ-doped composites, a broad metal-insulator transition temperature region was found at zero and low magnetic field, which results in an obvious enhanced magnetoresistance in the temperature range 10-350 K. Specially, a larger magnetoresistance value was observed at room temperature at 3 T, which is encouraging with regard to the potential application of magnetoresistance materials.