LC Determination of 4-Bromoaniline in Green Algae Chlamydomonas reinhardtii After Continuous-Flow Microextraction

In this study, the determination of 4-Bromoaniline (4-BA) in green algae Chlamydomonas reinhardtii (C. reinhardtii) was investigated by applying continuous-flow microextraction (CFME) combined with high-performance liquid chromatography (HPLC). Continuous-flow microextraction was conducted in a homemade glass chamber, i.e. the sample solution flowed through a constant volume drop of solvent in the chamber at a constant flow rate. The effects of different factors on extraction efficiencies were also investigated and these factors included the kind of extraction solvent, solvent drop volume, sample flow rate, extraction time and addition amount of salt. Under the optimum extraction conditions (extraction solvent, carbon tetrachloride; solvent drop volume, 3.5 μL; sample flow rate, 1.0 mL min⁻¹; extraction time, 10 min; no addition of salt), the calibration plot was set up by plotting peak area against a series of 4-Bromoaniline concentrations (0.01–10 μg mL⁻¹) in aqueous solution. The correlation coefficient (r) was 0.9990. The limit of detection (LOD) was 0.6 ng mL⁻¹. The precision of this method was obtained by successive five time analyses of 100-ng mL⁻¹ standard solution of 4-Bromoaniline, and the relative standard deviation (RSD) was 3.5%. The concentration factor was calculated by the ratio of peak area of the analyte obtained after and before extraction and found to be 10.6. 4-Bromoaniline residues in Chlamydomonas. reinhardtii cells and tap water samples were satisfactorily analyzed according to the method described above.     

Influence of the Br?nsted and Lewis Acid Sites in Platinum/Solid Acid Catalysts on the Hydrogenation of Benzene and Toluene

The hydrogenation of benzene and toluene was investigated over US-SSY, -Al₂O₃, and Ha1-MCM-41 supported platinum catalysts. The acidity of catalyst supports was measured by IR spectra of pyridine adsorption. On the Brönsted acid supported catalyst, both the hexacyclic saturation product and the pentacyclic one, the hydroisomerization product, were observed, and these two products were revealed to be primary reaction products. The two products were proposed to be formed competitively on Brönsted acid sites with carbonium ions as the reaction intermediate. By contrast, no hydroisomerization product was found on Lewis acid supported catalysts. It was inferred that the electron-deficient reaction intermediate formed on Lewis acids could not undertake any skeletal isomerization process to give a pentacyclic saturation product.     

HCl-NaCl-C3H8O3-H2O体系溶液热力学性质

在恒定丙三醇质量分数x=0．1的条件下，测定了无液接电池（A）和电池（B）的电动势根据电池（A）电动势确定了丙三醇和水混合溶剂中的Ag－AgCl电极的标准电极电势，讨论了HCl的迁移性质；由电池（B）测得的电动势计算了HCl在该体系中的活度系数γA，计算的结果表明，对于所讨论的体系，在溶液中总离子强度保持恒定，HCl的活度系数服从Harned规则．在溶液组成恒定时，IgγA是温度倒数1／T的线性函数，讨论了混合物中HCl的相对偏摩尔焓及介质效应．     

Particle interactions in electrophoresis: I. Motion of two spheres along their line of centers

The electrophoretic motion of two charged colloidal spheres with very thin electrical double layers in a constant applied electric field along their line of centers is considered. The particles may differ in radius and in zeta potential at the surface. The electrostatic and hydrodynamic governing equations are solved in the quasi-steady situation using bipolar coordinates and the electrophoretic velocities of particles are calculated for various cases. The interaction effect between particles can be very significant when the distance between particle surfaces gets close to zero. The particle with smaller zeta potential is speeded up by the motion of the other, which is retarded at the same time by the motion of the former one, if the two spheres have unequal zeta potentials of the same electrical sign. For two particles of different signs in zeta potential, motions of both are hindered by each other. The influence of the interaction between particles in general is stronger on the smaller one than on the larger one. For the special case of two electrophoretic spheres with identical zeta potentials, there is no particle interaction for all particle sizes and separations.     

Raman and UV-visible absorption spectra of ion-paired aggregates of copper porphyrins

Raman and UV-visible absorption spectra of ion-paired aggregate constructed from two copper porphyrins, copper tetrakis(4-N-methylpyridyl)porphyrin (CuTMPyP) and copper tetrakis(4-sulfonatophenyl)pophyrin (CuTSPP), are reported in this paper. The absorption bands of the aggregate was found exhibiting obvious shift and broadening, which are attributed to the excitonic coupling between the two paired porphyrin rings. The excitonic coupling in the aggregates also induces evident alteration for Raman intensities compared with monomer spectrum. Aggregation results in only small shifts (2-3 cm(-1)) for Raman lines connecting with the vibrations of porphyrin rings, manifesting only slight structural change of porphyrin skeletons. On the other hand, evident downshift (5 cm(-1)) was observed for the Cm-pyridyl stretch mode (1254 cm(-1)) of CuTMPyP, suggesting weakening of the Cm-pyridyl bonds by aggregation. Raman depolarization ratios of the aggregates are different from those of the monomers, implying a lowering of effective symmetry due to the molecular packing in the aggregates.     

Preparation and characterization of biodegradable nanoparticles based on amphiphilic poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) triblock copolymer

Amphiphilic triblock copolymers of poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) (PHB-PEG-PHB) were directly synthesized by the ring-opening copolymerization of β-butyrolactone monomer using PEG as macroinitiator. Their structure, thermal properties and crystallization were investigated by ¹H NMR, differential scanning calorimetry (DSC) and X-ray diffraction. It was found that both PHB and PEG blocks were miscible. With the increase in the PHB block length, the triblock copolymers became amorphous because amorphous PHB block remarkably depressed the crystallization of the PEG block. Biodegradable nanoparticles with core-shell structure were prepared in aqueous solution from the amphiphilic triblock copolymers, and characterized by ¹H NMR, SEM and fluorescence. The hydrophobic PHB segments formed the central solid-like core, and stabilized by the hydrophilic PEG block. The nanoparticle size was close related to the initial concentrations of the nanoparticle dispersions and the compositions of the triblock copolymers. Moreover, the PHB-PEG-PHB nanoparticles also showed good drug loading properties, which suggested that they were very suitable as delivery vehicles for hydrophobic drugs.     

Insertion reactions of hydridonitrosyltetrakis(trimethylphosphine) tungsten(0)

[W(H)(NO)(PMe3)4] (1) was prepared by the reaction of [W(Cl)(NO)(PMe3)4] with NaBH4 in the presence of PMe3. The insertion of acetophenone, benzophenone and acetone into the W-H bond of 1 afforded the corresponding alkoxide complexes [W(NO)(PMe3)4(OCHR1R2)](R1 = R2 = Me (2); R1 = Me, R2 = Ph (3); R1 = R2 = Ph (4)), which were however thermally unstable. Insertion of CO2 into the W-H bond of yields the formato-O complex trans-W(NO)(OCHO)(PMe3)4 (5). Reaction of trans-W(NO)(H)(PMe3)4 with CO led to the formation of mer-W(CO)(NO)(H)(PMe3)3 (6) and not the formyl complex W(NO)(CHO)(PMe3)4. Insertion of Fe(CO)(5), Re2(CO)10 and Mn2(CO)10 into trans-W(NO)(H)(PMe3)4 resulted in the formation of trans-W(NO)(PMe3)4(mu-OCH)Fe(CO)4 (7), trans-W(NO)(PMe3)4(mu-OCH)Re2(CO)9 (8) and trans-W(NO)(PMe3)4(mu-OCH)Mn2(CO)9 (9). For Re2(CO)10, an equilibrium was established and the thermodynamic data of the equilibrium reaction have been determined by a variable-temperature NMR experiments (K(298K)= 104 L mol(-1), DeltaH=-37 kJ mol(-1), DeltaS =-86 J K(-1) mol(-1)). Both compounds 7 and 8 were separated in analytically pure form. Complex 9 decomposed slowly into some yet unidentified compounds at room temperature. Insertion of imines into the W-H bond of 1 was also additionally studied. For the reactions of the imines PhCH=NPh, Ph(Me)C=NPh, C6H5CH=NCH2C6H5, and (C6H5)2C=NH with only decomposition products were observed. However, the insertion of C10H7N=CHC6H5 into the W-H bond of led to loss of one PMe3 ligand and at the same time a strong agostic interaction (C17-H...W), which was followed by an oxidative addition of the C-H bond to the tungsten center giving the complex [W(NO)(H)(PMe3)3(C10H6NCH2Ph)] (10). The structures of compounds 1, 4, 7, 8 and 10 were studied by single-crystal X-ray diffraction.     

Preparation of aromatic copolyesteramides by the direct polycondensation with a vilsmeier adduct derived from tosyl chloride and N,N-dimethylformamide

The reaction promoted by Vilsmeier adduct derived from tosyl chloride (TsCl) with N,N-dimethylformamide (DMF) was successfully applied to the preparation of copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, diamines, and bisphenols. The polycondensation was significantly affected by the reaction of activated dicarboxylic acids with bisphenols and diamines. Addition of a mixture of bisphenols and diamines likely caused gelation of the reaction mixtures, resulting in insoluble polymers, especially with high mol % diamines. Stepweise addition of them, however, gave the homogeneous reaction mixtures and copolymers of better solubility. These phenomena were studied in terms of sequence length distribution of polyester units, which was estimated by thermal analyses of the random copolymers prepared under various conditions for the initial reaction with bisphenols.     

242Pu as tracer for simultaneous determination of 237Np and 239,240Pu in environmental samples

A procedure has been developed using ²⁴²Pu as tracer for simultaneous determination of ²³⁷Np and ^239,240Pu in environmental samples. The validity of the method has been demonstrated by ICPMS and a-spectroscopy for up to 10 gram soil and sediment, seawater up to 200 litres. The paper describes a suitable chemical procedure for Np and Pu including a quantitative pre-concentration of neptunium and plutonium, preparation of Np⁴⁺ and Pu⁴⁺, Np(NO₃)₆ ^2- and Pu(NO₃)₆ ^2-. The ratio of ²³⁷Np/²⁴²Pu (or ²³⁷Np/²³⁹Pu) before and after the procedure has been determined using 10 g soil (free from Np and Pu) R _before/R _after = 1.004±3.3% (S.D n = 20) and 1 litre seawater R _before/R _after = 1.019±1.9% (S.D., n = 12). Results from the intercomparison samples IAEA-135, IAEA-381 and from environmental samples are presented.