Evaluation of the Potential Phosphorylation Effect on Isocitrate Dehydrogenases from Saccharomyces cerevisiae and Yarrowia lipolytica

Applied Biochemistry and Biotechnology - Escherichia coli isocitrate dehydrogenase (IDH) is regulated by reversible phosphorylation on Ser113. Latest phosphoproteomic studies revealed that...     

Stereoconvergent,Redox‐Neutral Access to Tetrahydroquinoxalines through Relay Epoxide Opening/Amination of Alcohols

We present an economical catalytic procedure to convert readily available 1,2‐diaminobenzenes and terminal epoxides into valuable 1,2,3,4‐tetrahydroquinoxalines in a highly enantioselective fashion. This procedure operates through relay zinc and iridium catalysis, and achieves redox‐neutral and stereoconvergent production of valuable chiral heterocycles from racemic starting materials with water as the only side product. The use of commercially available reagents and catalysts and a convenient procedure also make this catalytic method attractive for practical application.     

Structure and micro-mechanical properties of helium-implanted layer on Ti by plasma-based ion implantation

The present paper concentrates on structure and micro-mechanical properties of the helium-implanted layer on titanium treated by plasma-based ion implantation with a pulsed voltage of −30 kV and doses of 3, 6, 9 and 12 × 10¹⁷ ions/cm², respectively. X-ray photoelectron spectroscopy and transmission electron microscopy are employed to characterize the structure of the implanted layer. The hardnesses at different depths of the layer were measured by nano-indentation. We found that helium ion implantation into titanium leads to the formation of bubbles with a diameter from a few to more than 10 nm and the bubble size increases with the increase of dose. The primary existing form of Ti is amorphous in the implanted layer. Helium implantation also enhances the ingress of O, C and N and stimulates the formations of TiO₂, Ti₂O₃, TiO, TiC and TiN in the near surface layer. And the amount of the ingressed oxygen is obviously higher than those of nitrogen and carbon due to its higher activity. At the near surface layer, the hardnesses of all implanted samples increases remarkably comparing with untreated one and the maximum hardness has an increase by a factor of up to 3.7. For the samples implanted with higher doses of 6, 9 and 12 × 10¹⁷ He/cm², the local displacement bursts are clearly found in the load-displacement curves. For the samples implanted with a lower dose of 3 × 10¹⁷ He/cm², there is no obvious displacement burst found. Furthermore, the burst width increases with the increase of the dose.     

Enhancement of bioelectrochemical dioxygen reduction with oxygen-enriching materials

Bioelectrochemical dioxygen reduction reaction (ORR) catalyzed by multi-copper oxidases (MCOs) is a process of paramount importance occurring at the cathode of enzymatic biofuel cells (EBFCs), which is an energy harvester that holds promise of self-sustained implantable and wearable medical devices. The MCO biocathode is, however, frequently the limiting factor of a working EBFC. Besides the operational stability issue, enzymatic biocathodes are largely constrained by the relatively low solubility of dioxygen in aqueous solution. As an emerging topic, we here review the introduction of dioxygen-enriching materials to the cathodic bioelectrode for overcoming the dioxygen supply limitation, leading to improved ORR performance.     

Radical Heteroarylalkylation of Alkenes via Three‐Component Docking‐Migration Thioetherification Cascade

A novel, rational‐designed approach to access various heteroaryl‐substituted alkyl thioethers was developed via docking‐migration cascade process. By utilizing three components involving alkene, dual‐function reagent, and thioetherificating reagent, radical heteroarylalkylation of alkenes followed by thiolation of the alkyl radical intermediates proceeded smoothly, manifesting well compatibility of substrates and cascade transformations. Furthermore, this protocol also features mild conditions, broad substrate scope, and wide product diversity.     

Building Polyoxometalate “Nano-Walls” on 3D Porous Carbon Paper: A Solar Steam Generation System for Water Purification

As promising fresh-water purification devices, solar steam generation systems have attracted significant attention recently. However, in practice, the approach often suffers from a poor solar energy conversion efficiency and a low water production rate due to poor material selection and inefficient microscopic structure design. Here, we fabricate an efficient solar steam generation system by “building” polyoxometalate “nano-walls” on rice paper-derived three-dimensional porous carbon paper. In this solar steam generation system, the height of the vertically aligned CoP₄Mo₆ “nano-walls” range from 100 to 150 nm with thicknesses about 15 to 25 nm. Under 1 sun irradiation (1 sun = 1 kW m⁻²), the surface temperature increases from 29 to 50 °C in a short time with a solar thermal conversion efficiency achieving 92.8 %. The stability and durability of this solar steam generation system, which withstands fifteen cycle continuous tests, also offer good prospects. Its attractive solar energy conversion performance originates from the intense sunlight absorption and high conversion ability of the CoP₄Mo₆ “nano-walls”, as well as extremely promising heat localization and water transportation properties of the three-dimensional porous carbon paper. This solar steam generation system, which has produced some inspiring results, is employed for seawater desalination and for purification of water polluted with organic dyes.     

Synthesis and Herbicidal Activities of 3‐(4‐Chloro‐2‐fluoro‐5‐substituted phenyl)benzo[d][1,2,3]triazin‐4(3H)‐one Derivatives

A series of 3‐phenyl benzo[d][1,2,3]triazin‐4(3H)‐one derivatives were synthesized through the condensation of phenol E and alkyl (alkenyl, alkynyl) chlorides (bromides, iodide) or alkyl chloroacetates or N‐alkyl chloroacetamides using K₂CO₃ as the acid acceptor in N,N‐dimethylformamide. Phenol E was prepared from starting material, 5‐amino‐2‐chloro‐4‐fluorophenyl ethyl carbonate, in four steps involving in amidation, reduction, diazotization, and deprotecting‐group reaction. The herbicidal activities of the title compounds were tested against two dicotyledonous plants and two monocotyledonous plants, in which some of them exhibited high herbicidal activities against two dicotyledonous plants in preemergence and postemergence treatments. Moreover, when the dosage was decreased to 180 and 90 g/ha, compounds F1 , F8 , and F9 showed highly selective inhibitory activities against amaranth pigweed, alfalfa, asteraceae, field sowthistle, morning glory, purslane, and velvetleaf in postemergence treatment but had no herbicidal efficacy on rape except F1 , suggesting that it be possible to find a kind of herbicides to inhibit dicotyledonous weeds in the field of dicotyledonous crops with the same genus as aforementioned weeds.     

Chemical Exchange Saturation Transfer (CEST) Agents: Quantum Chemistry and MRI

Diamagnetic chemical exchange saturation transfer (CEST) contrast agents offer an alternative to Gd³⁺‐based contrast agents for MRI. They are characterized by containing protons that can rapidly exchange with water and it is advantageous to have these protons resonate in a spectral window that is far removed from water. Herein, we report the first results of DFT calculations of the ¹H nuclear magnetic shieldings in 41 CEST agents, finding that the experimental shifts can be well predicted (R²=0.882). We tested a subset of compounds with the best MRI properties for toxicity and for activity as uncouplers, then obtained mice kidney CEST MRI images for three of the most promising leads finding 16 (2,4‐dihydroxybenzoic acid) to be one of the most promising CEST MRI contrast agents to date. Overall, the results are of interest since they show that ¹H NMR shifts for CEST agents—charged species—can be well predicted, and that several leads have low toxicity and yield good in vivo MR images.     

Continuous Electrochemical Synthesis of Iso-Coumarin Derivatives from o-(1-Alkynyl) Benzoates under Metal- and Oxidant-Free

A non-oxidant and metal-free strategy for synthesizing iso-coumarin by using a continuous electrochemical microreactor to initiate an oxidative cyclization reaction of o-(1-alkynyl) benzoate and radicals. This efficient and clean continuous electrosynthesis method not only avoids the complicated gas protection operation and production of by-products in the batch processes, but also help to overcome the difficulty that batch metal catalysis and electrocatalysis are difficult to scale up, and has the potential for pilot-scale experiment.     

Applications of Selenonium Cations as Lewis Acids in Organocatalytic Reactions

The use of trisubstituted selenonium salts as organic Lewis acids in electrophilic halogenation and aldol‐type reactions has been developed. The substrate scope is broad. The reaction conditions are mild and compatible with various functionalities. This study opens a new avenue for the development of nonmetallic Lewis acid catalysis.