蒸馏沉淀聚合法制备窄分散聚二乙烯基苯-co-丙烯腈功能聚合物微球

采用蒸馏沉淀聚合法,利用过氧化苯甲酰(BPO)为引发剂,在不加任何稳定剂和不搅拌的情况下,丙烯腈(AN)和二乙烯基苯(DVB)为共聚单体制备了不同交联度的微米和亚微米窄分散聚合物微球,考查了共聚单体对球体的影响,并用扫描电镜(SEM)和红外光谱对微球进行了表征.     

Determination of Podophyllotoxin and 4′-Demethylepipodophyllotoxin by Capillary Electrophoresis

A new simple, rapid and sensitive capillary zone electrophoresis (CZE) method has been developed for the simultaneous separation and determination of the anticancer active compounds podophyllotoxin (PPT) and 4′-demethylepipodophyllotoxin (DMEP) in ethanol extracts of the roots of Sinopophyllum emodi (Wall) Ying, and the roots, stems, leaves and fibrils of Dysosma versipellis (Hance) M. cheng. PPT and DMEP could be completely separated and sensitively determined at 214 nm within 12.5 min using 25 mM borate with pH 10.80 as running buffer (applied voltage 20 kV, temperature 20 °C, injection time 5 s). The linear range for the determination of PPT and DMEP were 1.5–171.0 μg mL⁻¹ and 5.0–136.0 μg mL⁻¹ with RSD of the relative migration time for PPT and DMEP of 1.50 and 3.26, and of the relative peak area of 0.82 and 1.13, respectively. The results showed that the method had requisite selectivity, sensitivity, reproducibility and wide linear range for the application to the rapid separation and accurate determination of PPT and DMEP in podophyllum plants. Furthermore, this is the first report about the analysis of podophyllotoxin analogues by CE.     

Cu@UiO-66衍生的Cu+-ZrO2界面位点用于高效催化CO2加氢制甲醇

Cu/ZrO₂ catalysts have demonstrated effective in hydrogenation of CO₂ to methanol, during which the Cu-ZrO₂ interface plays a key role. Thus, maximizing the number of Cu-ZrO₂ interface active sites is an effective strategy to develop ideal catalysts. This can be achieved by controlling the active metal size and employing porous supports. Metal-organic frameworks (MOFs) are valid candidates because of their rich, open-framework structures and tunable compositions. UiO-66 is a rigid metal-organic skeleton material with excellent hydrothermal and chemical stability that comprises Zr as the metal center and terephthalic acid (H₂BDC) as the organic ligand. Herein, porous UiO-66 was chosen as the ZrO₂ precursor, which can confine Cu nanoparticles within its pores/defects. As a result, we constructed a Cu-ZrO₂ nanocomposite catalyst with high activity for CO₂ hydrogenation to methanol. Many active interfaces could form when the catalysts were calcined at a moderate temperature, and the active interface was optimized by adjusting the calcination temperature and active metal size. Furthermore, the Cu-ZrO₂ interface remained after CO₂ hydrogenation to methanol, as confirmed by transmission electron microscopy (TEM), demonstrating the stability of the active interface. The catalyst structure and hydrogenation activity were influenced by the content of the active component and the calcination temperature; therefore, these parameters were explored to obtain an optimized catalyst. At 280 ℃ and 4.5 MPa, the optimized CZ-0.5-400 catalyst gave the highest methanol turnover frequency (TOF) of 13.4 h^-1 with a methanol space-time yield (STY) of 587.8 g·kg^-1·h^-1 (calculated per kilogram of catalyst, the same below), a CO₂ conversion of 12.6%, and a methanol selectivity of 62.4%. In situ diffuse-reflectance infrared Fourier transform spectroscopy (DRIFTS) of CO adsorption over the optimized catalyst revealed a predominant, unreducible Cu⁺ species that was also identified by X-ray photoelectron spectroscopy (XPS). The favorable activity observed was due to this abundant Cu⁺ species coming from the Cu⁺-ZrO₂ interface that served as the methanol synthesis active center and acted as a bridge for transporting hydrogen from the active Cu species to ZrO₂. In addition, the oxygen vacancies of ZrO₂ promoted the adsorption and activation of CO₂. These vacancies and Cu⁺ trapped in the ZrO₂ lattice are the active sites for methanol synthesis from CO₂ hydrogenation. The X-ray diffraction (XRD) patterns of the catalyst before and after reaction revealed the stability of its structure, which was further verified by time-on-stream (TOS) tests. Furthermore, in situ DRIFTS and temperature-programmed surface reaction-mass spectroscopy (TPSR-MS) revealed the reaction mechanism of CO₂ hydrogenation to methanol, which followed an HCOO-intermediated pathway.     

偶氮聚电解质的聚集和纳米聚集体

研究了两种具有不同化学结构的阴离子型偶氮聚电解质在四氢呋喃 /水混合溶剂中的聚集行为 .利用紫外 可见光谱和透射电镜等研究了偶氮聚电解质的聚集过程以及相应聚集体的形貌以及介质pH对聚集的影响 .结果表明 ,在四氢呋喃 /水混合溶剂中 ,随着水含量的增加 ,偶氮生色团逐渐聚集 ,其紫外光谱上最大吸收峰位置逐渐蓝移 ,而强度逐渐下降 .在较高浓度条件下 ,形成的聚集体可以用透射电镜直接观察到 ,呈现直径为 80nm左右的球形超分子结构 .与相应的偶氮两亲性小分子相比 ,这两种偶氮聚电解质形成的聚集体具有更高的稳定性 .由于羧酸基团和偶氮生色团相互连接的方式不同 ,溶液pH对这两种聚集体具有完全相反的影响 .偶氮生色团的聚集会严重影响偶氮生色团反式至顺式的异构化效率 .     

Preparation of azo polyelectrolyte self-assembled multilayers by using N,N-dimethylformamide/H2O mixtures as solvents

N,N-Dimethylformamide (DMF)/H₂O mixtures were used as solvents to fabricate azo polyelectrolyte (PEAPH)/poly(diallyldimethyl ammonium chloride)(PDAC) self-assembled multilayers with the layer-by-layer electrostatic adsorption technique. PEAPH is a copolymer of acrylic acid and azobenzene-containing acrylate. The effect of the ratio of DMF to water on the multilayer growth, structure and surface morphology was studied in some details. Results show that DMF/H₂O mixtures are proper media for PEAPH/PDAC multilayer fabrication. The ratio of DMF to water in the mixture has significant influence on the multilayer structure and surface morphology. With the increase of DMF content, the multilayer thickness has a better linear growth relationship with the bilayer number, and the multilayer surface becomes smoother. Moreover, azo chromophores show less H-aggregation when the multilayers are fabricated from DMF/H₂O mixtures with higher DMF contents. These studies demonstrate that using organic solvent and water mixtures is an effective way to control the multilayer construction by adjusting the media properties. This method can be applied to multilayer fabrication of other water-insoluble polyelectrolytes. __________ Translated from Acta Polymerica Sinica, 2005, (4) (in Chinese)     

One‐stage synthesis of narrowly dispersed polymeric core‐shell microspheres

A method of one‐stage soap‐free emulsion polymerization to synthesize narrowly dispersed core‐shell microspheres is proposed. Following this method, core‐shell microspheres of poly(styrene‐co‐4‐vinylpyridine), poly(styrene‐co‐methyl acrylic acid), and poly[styrene‐co‐2‐(acetoacetoxy)ethyl methacrylate‐co‐methyl acrylic acid] are synthesized by one‐stage soap‐free emulsion polymerization of a mixture of one or two hydrophobic monomers and a suitable hydrophilic monomer in water. The effect of the molar ratio of the hydrophobic monomer to the hydrophilic one on the size, the core thickness, and the shell thickness of the core‐shell microspheres is discussed. The molar ratio of the hydrophobic and hydrophilic monomers and the hydrophilicity of the resultant oligomers of the hydrophilic monomer are optimized to synthesize narrowly dispersed core‐shell microspheres. A possible mechanism of one‐stage soap‐free emulsion polymerization to synthesize core‐shell microspheres is suggested and coagglutination of the oligomers of the hydrophilic monomers on the hydrophobic core is considered to be the key to form core‐shell microspheres. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1192–1202, 2008     

两种侧链偶氮聚电解质自组装膜中生色团取向研究

用偏振紫外光谱研究了两种侧链偶氮聚电解质静电逐层自组装膜中偶氮生色团的初始取向 .讨论了不同的组装条件对自组装膜中偶氮生色团取向的影响 .进一步探讨了偶氮聚电解质自组装膜的结构特点 .研究表明 ,侧链偶氮聚电解质自组装膜中的偶氮生色团存在一定程度的面内取向 ,自组装的各种影响条件和聚合物结构等 (pH值、侧链柔性间隔基团长度、以及偶氮生色团官能度等 )与自组装膜中偶氮生色团的面内取向程度存在一定的相关性 .通过研究偶氮生色团的取向和影响因素 ,可以深入认识侧链偶氮聚电解质的自组装行为     

在N,N-二甲基甲酰胺/水混合溶剂中制备偶氮聚电解质自组装膜

利用静电吸附逐层自组装方法在有机溶剂N,N二甲基甲酰胺(DMF)和H2O的混合介质中制备非水溶性偶氮聚电解质自组装多层膜.研究了DMF和H2O的配比对自组装膜生长、结构与表面形态的影响.结果表明,DMFH2O的混合溶剂是非水溶性偶氮聚电解质自组装的理想介质,二者之间的配比对自组装膜的生长速度,膜的结构以及表面形态均有显著影响.随着混合溶液中DMF含量的升高,自组装膜的生长速度逐渐下降但线形生长关系越来越好,所得自组装膜中偶氮生色团的H聚集程度逐渐下降,而且自组装膜的表面越来越平整.