(C4N2H12)[(GeO2)3(BO1.5F)2], a layered borogermanate containing three‐ and nine‐membered rings

A new borogermanate, viz. piperazine‐1,4‐di­ium di­fluoro­nona­oxo­tri­germanium­di­boron, (C₄H₁₂N₂)[(GeO₂)₃(BO_1.5F)₂], was solvo/hydro­thermally synthesized. The crystal structure consists of layers composed of three‐membered‐ring Ge₃O₉ subunits and nine‐membered‐ring channels formed by six GeO₄ tetrahedra and three BO₃F tetrahedral pairs. The diprotonated piperazine cations, which lie about inversion centres, are located between adjacent layers and connect the layers via hydrogen bonds.     

Properties and Applications of Mixed Packing Capillary Electrochromatography

Mixed packing capillary electrochromatography (MP CEC) with the stationary phase comprising a physical mixture of strong cation exchange (SCX) phase and octadecysilyl (ODS) phase was developed. With the existence of a sulfonic acid group on the surface of SCX, not only could the electroosmotic flow (EOF) remain high at low pH, but also the hydrophilicity of the stationary phase was increased greatly, leading to broad adaptable ranges of both pH and organic modifier concentration in the mobile phase. At the same time, with the coexistence of C₁₈ on the surface of ODS, both the retention and the resolution of samples were improved. Accordingly, MP CEC combined the advantages of both SCX and ODS columns. Effects of operation parameters on EOF and the capacity factors of solutes as well as the retention mechanism of such a column were studied systematically. In addition, MP CEC columns were used in the analysis of strong polar solutes as well as for the high speed separation of acidic, basic, and neutral compounds in a single run.     

Single-crystalline layered double hydroxides with rich defects and hierarchical structure by mild reduction for enhancing the oxygen evolution reaction

The oxygen evolution reaction(OER) with sluggish reaction kinetics and large overpotential is the critical reaction in water splitting that is promising for energy storage and conversion. Layered double hydroxides(LDHs), due to their unique lamellar structure and flexibility of chemical component, are very competing material candidates for OER. Herein, the morphology structure and the electronic structure of LDHs were simultaneously tuned to improve the OER catalytic activity by mild solvothermal reduction using ethylene glycol. The increased surface area, the introduction of oxygen vacancies and the construction of hierarchical structure greatly enhanced the electro-catalytic activity of LDHs for OER. The as-prepared LDHs showed a lower over-potential as low as 276 mV at a current density of 10 mA cm~(-2), and a small Tafel slope of 40.3 mV dec~(-1) accompanied with good stability. This work provides an efficient way to the design and optimization of advanced catalysts in the future.     

A Bubble‐Dragged Catalytic Polymer Microrocket

We report the bubble dragged microrocket consisting of functionalized multilayer polymer covered asymmetrically by platinum nanoparticles. The microrocket is pushed back during bubble growth over a small step and dragged forward over a big step during bubble explosion. Each bubble explosion induced a shock wave of gas which propagates in water at ultrafast speed. The bubble dragged microrocket can move along an approximate straight line instead of a fluctuating circle which is the trajectory of a bubble‐pushed microrocket in most cases, which makes it a promising candidate for drug delivery and simulating rod‐shaped bacteria.     

Spectral Characterization of Couplings in a Mixed Optomechanical Model *

Abstract:We study the spectrum of single-photon emission and scattering in a mixed optomechanical model which consists of both linear and quadratic optomechanical interactions. The spectra are calculated based on the exact long-time solutions of the single-photon emission and scattering processes in this system. We find that there exist some phonon sideband peaks in the spectra and there are some sub peaks around the phonon sideband peaks under proper parameter conditions. The correspondence between the spectral features and the optomechanical interactions is confirmed, and the optomechanical coupling strengths can be inferred by analyzing the resonance peaks and dips in the spectra.     

Isotropic polynomial invariants of Hall tensor

The Hall tensor emerges from the study of the Hall effect, an important magnetic effect observed in electric conductors and semiconductors. The Hall tensor is third-order and three-dimensional, whose first two indices are skew-symmetric. This paper investigates the isotropic polynomial invariants of the Hall tensor by connecting it with a second-order tensor via the third-order Levi-Civita tensor. A minimal isotropic integrity basis with 10 invariants for the Hall tensor is proposed. Furthermore, it is proved that this minimal integrity basis is also an irreducible isotropic function basis of the Hall tensor.     

两端铰接的细长柔性圆柱体涡激振动响应特性数值研究

目前细长柔性圆柱体涡激振动响应的研究方法主要包括实验方法、计算流体动力学方法以及半经验模型方法. 鉴于实验方法研究成本较高、计算流体动力学方法计算时间较长,本文基于尾流振子模型对线性剪切来流下两端铰接的细长柔性圆柱体涡激振动响应特性进行了半经验模型方法研究. 先建立了柔性圆柱体结构振子以及尾流振子之间的耦合模型,紧接着基于二阶精度中心差分格式对耦合模型先离散后迭代进行求解. 对不同剪切参数下柔性圆柱体涡激振动响应的振动波长、振动频率、振动位移以及响应频率随时间的变化特性等参数进行了分析. 分析结果表明:圆柱体的涡激振动响应由驻波和行波混合组成. 当无量纲弯曲刚度较小时,在圆柱体两端附近,驻波占主导;而在圆柱体中间段附近,行波占主导. 当无量纲弯曲刚度较大时,在圆柱体整个长度区间上均为驻波占主导. 随着剪切参数的增大,振动位移以及振动波长均逐渐减小,而振动频率和频率带宽均逐渐增大.      

Bäcklund transformation,rogue wave solutions and interaction phenomena for a $$\varvec{(3+1)}$$ ( 3 + 1 ) -dimensional B-type Kadomtsev–Petviashvili–Boussinesq equation

Nonlinear Dynamics - Under investigation in this paper is the $$(3+1)$$ -dimensional B-type Kadomtsev–Petviashvili–Boussinesq (BKP–Boussinesq) equation, which can display the...     

INSTABILITY OF COUPLED THERMO-SOLUTE CAPILLARY CONVECTION IN LIQUID BRIDGE AND CONTROL BY ROTATING MAGNETIC FIELD

浮区法因具有无坩埚接触污染的生长优点而成为生长高完整性和高均匀性单晶材料的重要技术.但熔体中存在的毛细对流会给浮区法晶体生长带来极大挑战,这是由于对流的不稳定会导致晶体微观瑕疵的产生和宏观条纹等缺陷的形成.为了提高浮区法生长单晶材料的品质,研究浮区法晶体生长中毛细对流特性及如何控制其不稳定性显得尤为重要.本文采用数值模拟的方法对半浮区液桥内Si_xGe_1-x体系中存在的热质毛细对流展开研究并施加旋转磁场对其进行控制.结果表明：纯溶质毛细对流表现为二维轴对称模式,温度场主要由热扩散作用决定,而浓度场则由对流和溶质扩散共同支配;纯热毛细对流呈现三维稳态非轴对称流动,浓度分布与熔体内热毛细对流的流向密切相关,等温线在对流较大的区域发生弯曲;耦合溶质与热毛细对流则为三维周期性旋转振荡流.施加旋转磁场后,熔体周向速度沿径向向外增大,熔体内浓度场和流场均呈现二维轴对称分布.     

纯Cr2O3包覆Li4Ti5O12微球的制备及其储锂性能研究

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.