Interference of a four-hole aperture for on-chip quantitative two-dimensional differential phase imaging

We present a novel on-chip method for quantitative two-dimensional differential phase imaging. This technique uses four circular holes (600 nm diameter, 1.2 mum spacing) arranged in a 'plus' pattern that are fabricated in a layer of metal above a complementary metal-oxide semiconductor (CMOS) imaging sensor. The interference pattern of the aperture shifts position with respect to the differential phase of the incident light. By imaging the interference pattern with the CMOS sensor, this method measures amplitude and differential phase (1 degrees /microm sensitivity for signal-to-noise ratio >/=16 dB) of the incident light field simultaneously. An application to optical beam profiling is presented; we show the amplitude and differential phase profiles of a Gaussian laser beam and an optical vortex.     

Active Metabolites from the Fungus Pestalotiopsis sp. YMF1.0474

Chemistry of Natural Compounds - The chemical constituents of the fungus Pestalotiopsis sp. YMF1.0474 were studied. Five compounds, including a new pestalrone C (1) and four known compounds,...     

A New Sesquiterpene from the Roots of Chloranthus multistachys

Chemistry of Natural Compounds - A new sesquiterpene, 1β-hydroxy-4(5),7(8),11(12)-triene-6,9-dione-7,8-furanoeudesmane (1), was isolated from the root extract of Chloranthus multistachys C....     

Direct immobilization of iodine-loaded silver-coated silica gel with silicate glass powders at low temperature

Journal of Radioanalytical and Nuclear Chemistry - To long-term immobilization of secondary iodine-waste, iodine loaded silver-coated silica-gel (AgIs), glass-powder was used to directly solidify...     

基于乙炔基-苯并噁嗪单元双重交联反应的聚酰亚胺树脂的制备与性能

为开发可低温固化的聚酰亚胺树脂, 通过分子结构设计将苯并噁嗪单元引入聚酰亚胺树脂中, 合成了含苯并噁嗪单元及乙炔基封端的双官能化新型聚酰亚胺预聚体(PIBzA). 经高温处理, 苯并噁嗪单元发生开环交联, 同时, 乙炔基端基发生三聚成环反应, 从而在固化树脂中形成双重交联网络结构. 苯并噁嗪单元的引入使聚酰亚胺树脂最快固化反应温度降低约32 ℃, 有效降低了固化温度. 同时, 苯并噁嗪单元的引入未大幅度降低树脂的耐热稳定性, 其玻璃化转变温度(T_g)介于266~290 ℃之间, 5%热失重温度(T_d,5%)接近500 ℃, 依然可以满足耐高温复合材料的应用需求. 此外, PIBzA固化树脂具有低介电特性, 其介电常数k介于2.3~3.0, 介电损耗介于0.002~0.008, 可满足透波复合材料及先进微电子封装材料的应用需求.     

Preparation of Low-dielectric Permittivity Polyimide Resins with High Surface Activity from Chemically Bonded Hyperbranched Polysiloxane

Thermosetting resin matrix is the key component of advanced wave-transparent composites,where low dielectric constant,excellent processability,high thermal stability,as well as good bonding ability are required for resins.Herein,we prepared a series of phenylethynyl terminated polyimide(PI)resins by grafting amine-functionalized hyperbranched polysiloxane(HBPSi)to PI chains during the in situ polymerization.The effects of HBPSi on the processability of oligomers,molecular packing,thermal stability,dielectric property and bonding ability to reinforce Kevlar fibers of the cured PI/HBPSi composite resins have been examined in detail.The dielectric constants of the cured composite resins were greatly reduced from 3.29 to 2.19 without compromising its processability and thermal stability.Meanwhile,the 10 wt％HBPSi-containing PI resin demonstrated better bonding ability to reinforce fibers with the interfacial shear strength(IFSS)of 37.64 MPa,compared with that of neat PI-6 matrix(27.34 MPa),and better adhesion to metal with the lap shear strength of 10.48 MPa,50％higher than that of neat resin PI-6(6.98 MPa).These resultant PI/HBPSi composite resins exhibit excellent comprehensive properties,indicating their great potential as low-dielectric constant resin matrix in radar radome.     

Scaling Up DNA Origami Lattice Assembly

The surface-assisted hierarchical assembly of DNA origami nanostructures is a promising route to fabricate regular nanoscale lattices. In this work, the scalability of this approach is explored and the formation of a homogeneous polycrystalline DNA origami lattice at the mica-electrolyte interface over a total surface area of 18.75 cm² is demonstrated. The topological analysis of more than 50 individual AFM images recorded at random locations over the sample surface showed only minuscule and random variations in the quality and order of the assembled lattice. The analysis of more than 450 fluorescence microscopy images of a quantum dot-decorated DNA origami lattice further revealed a very homogeneous surface coverage over cm² areas with only minor boundary effects at the substrate edges. At total DNA costs of € 0.12 per cm², this large-scale nanopatterning technique holds great promise for the fabrication of functional surfaces.     

Highly Emissive 9-Borafluorene Derivatives: Synthesis,Photophysical Properties and Device Fabrication

A series of 9-borafluorene derivatives, functionalised with electron-donating groups, have been prepared. Some of these 9-borafluorene compounds exhibit strong yellowish emission in solution and in the solid state with relatively high quantum yields (up to 73.6 % for FMesB-Cz as a neat film). The results suggest that the highly twisted donor groups suppress charge transfer, but the intrinsic photophysical properties of the 9-borafluorene systems remain. The new compounds showed enhanced stability towards the atmosphere, and exhibited excellent thermal stability, revealing their potential for application in materials science. Organic light-emitting diode (OLED) devices were fabricated with two of the highly emissive compounds, and they exhibited strong yellow-greenish electroluminescence, with a maximum luminance intensity of >22 000 cd m⁻². These are the first two examples of 9-borafluorene derivatives being used as light-emitting materials in OLED devices, and they have enabled us to achieve a balance between maintaining their intrinsic properties while improving their stability.