丽江玛咖的营养成分分析及多糖体外的抗氧化作用

对丽江种植区玛咖（Lepidium meyenii Walp）的营养成分进行分析,其含有丰富的蛋白质、碳水化合物、矿物质、维生素、脂肪酸和氨基酸等,并通过试验证明玛咖多糖体外具有一定的抗氧化保健作用,为丽江玛咖成功引种和进一步的研究开发提供依据.     

Stable single longitudinal mode erbium-doped silica fiber laser based on an asymmetric linear three-cavity structure

We present a stable linear-cavity single longitudinal mode (SLM) erbium-doped silica fiber laser. It consists of four fiber Bragg gratings (FBGs) directly written in a section of photosensitive erbium-doped fiber (EDF) to form an asymmetric three-cavity structure. The stable SLM operation at a wavelength of 1545.112 nm with a 3-dB bandwidth of 0.012 nm and an optical signal-to-noise ratio (OSNR) of about 60 dB is verified experimentally. Under laboratory conditions, the performance of a power fluctuation of less than 0.05 dB observed from the power meter for 6 h and a wavelength variation of less than 0.01 nm obtained from the optical spectrum analyzer (OSA) for about 1.5 h are demonstrated. The gain fiber length is no longer limited to only several centimeters for SLM operation because of the excellent mode-selecting ability of the asymmetric three-cavity structure. The proposed scheme provides a simple and cost-effective approach to realizing a stable SLM fiber laser.     

Effect of fused silica subsurface defect site density on light intensification

The effect of defect density on the modulation of incident laser waves is investigated. First, based on the actual defect distribution in the subsurface of fused silica, a three-dimensional (3D) grid model of defect sites is constructed. The 3D finite-difference time-domain method is developed to solve the Maxwell equations. Then the electrical field intensity in the vicinity of the defect sites in the subsurface of fused silica is numerically calculated. The relationships between the maximal electrical field intensity in fused silica and the geometry of the defect sites are given. The simulated results reveal that the modulation becomes more remarkable with an increase of the defect density. In addition, the effect of the distribution mode of defects on modulation is discussed. Meanwhile, the underlying physical mechanism is analyzed in detail.     

Role of chelating agent in chemical and fluorescent properties of SnO2 nanoparticles

A modified polyacrylamide gel route is applied to synthesize SnO2 nanoparticles. High-quality SnO2 nanoparticles with a uniform size are prepared using different chelating agents. The average particle size of the samples is found to depend on the choice of the chelating agent. The photoluminescence spectrum detected at λex = 230 nm shows a new peak located at 740 nm due to the surface defect level distributed at the nanoparticle boundaries.     

分析信息机房热环境的加权等效温差法

信息机房是集中存储和管理各类数据处理设备的建筑空间,其热环境的好坏对于各类数据处理设备的连续稳定运行具有重要意义。本文在回顾近年来对机房热环境分析、评价方面的研究基础上,提出了热量加权等效温差法,从考察传热能力损失的角度重新分析机房内的传热和流动过程。以地板送风为例,建立一个实际机房模型,通过数值模拟,将目前常用的机房热环境评价方法与加权等效温差分析结果进行对比,验证该方法的可行性。计算表明,加权等效温差分析方法不仅能有效刻画机房气流组织和热源的分布特性,还能分析由此带来的冷热气流掺混、冷量输配不均等导致机房冷却效率低下的各类因素,并提出相应的改进措施,对信息机房的节能运行有重要的指导意义。     

叶顶间隙尺度的不确定性对压气机性能影响的CFD模拟

本文研究了转子叶顶间隙尺度的不确定性对某轴流压气机的气动性能的影响。采用非嵌入式概率配置点法模拟间隙尺度不确定性在流场中的传播。先以二维随机方腔流动为模型,通过与蒙特卡洛模拟进行对比对非嵌入式概率配置点法进行验证。验证后采用该不确定性方法模拟了当叶顶间隙大小服从Beta分布时气动性能及流场参数的变化。     

The Construction of Sandbag Microstructure in Polyamide 6/Ethylene-Propylene-Diene Terpolymer/Nanometer Calcium Carbonate Ternary Composite

A sandbag microstructure was constructed in Polyamide 6(PA6)/ethylene-propylene-diene terpolymer (EPDM)/nanometer calcium carbonate (nano-CaCO₃) ternary composites by the addition of maleinated EPDM (EPDM-g-MA) to reduce the interfacial tension between EPDM and PA6 and EPDM and nano-CaCO₃. Scanning electron microscopy (SEM) observation and differential scanning calorimetry (DSC) analysis revealed that the microstructure of the ternary composites evolved from the initial separated EPDM and nano-CaCO₃ dispersion structure to the sandbag structure and finally to the separated dispersion structure again with the increase of EPDM-g-MA content in the elastomer phase. The mechanical results showed the composites with the sandbag microstructure exhibited excellent toughness and stiffness.     

三(三甲基硅烷)亚磷酸酯添加剂改善高镍三元正极材料的高电压循环性能

研究了三(三甲基硅烷)亚磷酸酯(TMSP)添加剂对高镍三元正极材料Li Ni_(0.83)Mn_(0.05)Co_(0.12)O_2(LNMC811)高电压循环性能的影响。结合电化学表征、理论计算、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、X射线衍射(XRD)等方法研究发现,在高电位(4.5 Vvs Li/Li~+)下,TMSP添加剂能够在LNMC811正极表面被氧化分解,生成一层富含导锂离子性能好的硅酸盐和电化学稳定的无机碳酸锂,且电解液主要分解产物(有机碳酸锂和氟化锂)含量较少的正极固体电解质界面(CEI)膜;分析表明覆盖在正极表面的薄而均匀的CEI膜,能够很好的降低充放电过程的极化电压,隔离电解液和正极的接触,减少电解液的分解,抑制金属离子的溶出,稳定正极晶体结构,使LNMC811材料能够在4.5 V(vs Li/Li~+)高电压循环时仍然保持良好的循环性能和倍率性能。     

涡轮叶栅前缘槽缝气膜冷却的数值模拟

应用FINE/TURBO软件包,求解三维雷诺平均N-S方程,对叶片前缘有两列冷却槽缝的气膜冷却流场进行了数值模拟,获得了不同吹风比下叶片表面静压分布与极限流线.在计算结果与实验数据良好符合的基础上,详细分析了槽缝冷却三维定常流场结构与槽缝附近的流动细节.研究结果表明,槽缝冷却对前缘压力分布影响较大,且在压力面引起较大的分离流动,不利于冷却.