Cyclopalladation of N-phenyl-4-ferrocenylmethylpyrazoles: Crystal structure of [Pd{κ-C,N-C6H4-1-[(3,5-Me2-C3N2)-CH2-(η-C5H4)Fe(η-C5H5)]}Cl(PPh3)] · CH2Cl2

The synthesis and characterization of pyrazole derivatives of general formula [C₆H₄-4-R-1-{(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)}] [R = OMe (1a) or H (1b)] with a ferrocenylmethyl substituent are described.The study of the reactivity of compounds 1 with palladium(II) acetate has allowed the isolation of complexes (μ-AcO)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (2) [R = OMe (2a) or H (2b)] that contain a bidentate [C(sp², phenyl), N]⁻ ligand and a central “Pd(μ-AcO)₂Pd” unit.Furthermore, treatment of 2 with LiCl produced complexes (μ-Cl)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (3) [R = OMe (3a) or H (3b)] that arise from the replacement of the acetato ligands by the Cl⁻.Compounds 2 and 3 also react with PPh₃ giving the monomeric complexes [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}X(PPh₃)] {X⁻ = AcO⁻ and R = OMe (5a) or H (5b) or X⁻ = Cl⁻ and R = OMe (6a) or H (6b)}, where the phosphine is in a cis-arrangement to the metallated carbon atom. Treatment of 3 with thallium(I) acetylacetonate produced [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}(acac)] (7) [R = OMe (7a) or H (7b)]. Electrochemical studies of the free ligands and the cyclopalladated complexes are also reported. The dimeric complexes 3 also react with MeO₂C-CC-CO₂Me (in a 1:4 molar ratio) giving [Pd{(MeO₂C-CC-CO₂Me)₂C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}Cl] (8) [R = OMe (8a) or H (8b)], which arise from the bis(insertion) of the alkyne into the σ{Pd-C(sp², phenyl)} bond of 3.     

New ruthenium(II) complexes with enantiomerically pure bis- and tris(pinene)-fused tridentate ligands. Synthesis, characterization and stereoisomeric analysis

A new set of Ru-Cl complexes containing either the pinene[5,6]bpea ligand (L1) or the C3 symmetric pinene[4,5]tpmOMe (L2) tridentate ligand in combination with the bidentate (B) 2,2'-bipyridine (bpy) or 1,2-diphenylphosphinoethane (dppe) with general formula [RuCl(L1 or L2)(B)](+) have been prepared and thoroughly characterized. In the solid state, X-ray diffraction analysis techniques have been used. In solution, cyclic voltammetry (CV) and 1D and 2D NMR spectroscopy have been employed. DFT calculations have been also performed on these complexes and their achiral analogues previously reported in our group, to interpret and complement experimental results. Whereas isomerically pure complexes ([Ru(II)Cl(L2)(bpy)](BF4), 5 and [Ru(II)Cl(L2)(dppe)](BF4), 6) are obtained when starting from the highly symmetric [Ru(III)Cl3(L2)], 2, isomeric mixtures of cis, fac-[Ru(II)Cl(L1)(bpy)](BF4) (3b/3b'), trans,fac- (3a) and up/down,mer- (3c, 3d) isomers are formed when bpy is added to the less symmetric [Ru(III)Cl3(L1)], 1, in contrast to the case of the bulky dppe ligand that, upon coordination to 1, leads to the trans,fac-[Ru(II)Cl(L1)(dppe)](BF4) (4a) complex as a sole isomer due to steric factors.     

Is Genetic Engineering a Route to Enhance Microalgae-Mediated Bioremediation of Heavy Metal-Containing Effluents?

Contamination of the biosphere by heavy metals has been rising, due to accelerated anthropogenic activities, and is nowadays, a matter of serious global concern. Removal of such inorganic pollutants from aquatic environments via biological processes has earned great popularity, for its cost-effectiveness and high efficiency, compared to conventional physicochemical methods. Among candidate organisms, microalgae offer several competitive advantages; phycoremediation has even been claimed as the next generation of wastewater treatment technologies. Furthermore, integration of microalgae-mediated wastewater treatment and bioenergy production adds favorably to the economic feasibility of the former process—with energy security coming along with environmental sustainability. However, poor biomass productivity under abiotic stress conditions has hindered the large-scale deployment of microalgae. Recent advances encompassing molecular tools for genome editing, together with the advent of multiomics technologies and computational approaches, have permitted the design of tailor-made microalgal cell factories, which encompass multiple beneficial traits, while circumventing those associated with the bioaccumulation of unfavorable chemicals. Previous studies unfolded several routes through which genetic engineering-mediated improvements appear feasible (encompassing sequestration/uptake capacity and specificity for heavy metals); they can be categorized as metal transportation, chelation, or biotransformation, with regulation of metal- and oxidative stress response, as well as cell surface engineering playing a crucial role therein. This review covers the state-of-the-art metal stress mitigation mechanisms prevalent in microalgae, and discusses putative and tested metabolic engineering approaches, aimed at further improvement of those biological processes. Finally, current research gaps and future prospects arising from use of transgenic microalgae for heavy metal phycoremediation are reviewed.     

Chemical Approach to the Optimization of Conditions Using HS-SPME/GC–MS for Characterization of Volatile Compounds in Eugenia brasiliensis Fruit

Grumixama (Eugenia brasiliensis Lam.) is a native fruit of the Brazilian Atlantic Forest, belonging to the Myrtaceae family, which designatesthe most significant number of species with food potential. It stands out due to its phytochemical characteristics because of the presence of polyphenols and volatile organic compounds. Volatile compounds are substances released by foods that give off an aroma and influence flavor. Solid-phase microextraction is a technique that allows for low-cost, fast, and solvent-free extraction, has an affinity for numerous analytes, and is easily coupled to gas chromatography. The objectives of this work were to evaluate the efficiency of different fibers of SPME (solid-phase microextraction) in the extraction of volatile organic compounds from grumixama pulp; optimize a method for extraction time, temperature, and sample weight; and to determine the characteristic volatile profile of this fruit. For the extraction of volatile compounds, three fibers of different polarities were used: polar polyacrylate (PA) fibers, divinylbenzene/carboxyne/polydimethylsiloxane (DVB/CAR/PDMS) semipolar fibers, and polydimethylsiloxane/divinylbenzene (PDMS/DVB). Fourteen volatile organic compounds (VOCs) were identified by DVB/CAR/PDMS, six by PA, and seven by PDMS/DVB through solid-phase microextraction in the headspace mode (SPME-HS). Considering the total number of compounds identified, regardless of the fiber used, and the optimization of the method, Eugenia brasiliensis presented sesquiterpene fractions (85.7%, 83.3%, and 85.7% of total VOCs) higher than the monoterpene fractions (14.3%, 16.7%, and 14.3%) for DVB/CAR/PDMS, PA, and PDMS/DVB, respectively in its composition. In addition, it was possible to verify that the fiber DVB/CAR/PDMS presented a better efficiency due to the larger chromatographic area observed when the grumixama pulp was subjected to conditions of 75 °C, 2.0 g, and an adsorption time of 20 min.     

Enzymatic kinetics of cellulose hydrolysis: a QCM-D study

The interactions between films of cellulose and cellulase enzymes were monitored using a quartz crystal microbalance (QCM). Real-time measurements of the coupled contributions of enzyme binding and hydrolytic reactions were fitted to a kinetic model that described closely significant cellulase activities. The proposed model combines simple Boltzmann sigmoidal and 1 - exp expressions. The obtained kinetics parameters were proven to be useful to discriminate the effects of incubation variables and also to perform enzyme screening. Furthermore, it is proposed that the energy dissipation of a film subject to enzymatic hydrolysis brings to light its structural changes. Overall, it is demonstrated that the variations registered in QCM frequency and dissipation of the film are indicative of mass and morphological transformations due to enzyme activities; these include binding phenomena, progressive degradation of the cellulose film, existence of residual, recalcitrant cellulose fragments, and the occurrence of other less apparent changes throughout the course of incubation.     

Tautomeric conjugate acids of 2-aminopyrroles: effect of substituents, solvation and cosolute

The tautomeric preferences of the conjugated acids of 2-aminopyrrole derivatives have been examined both in the gas phase and in aqueous solution by using a combination of quantum mechanical, self-consistent reaction field and Monte Carlo–free-energy perturbation methods. The results show that the nature of substituents, the solvent and the presence of cosolute are relevant factors in modulating the relative stability between the tautomeric conjugate acids protonated at the heterocyclic ring and at the exocyclic amino nitrogen. Thus, attachment of electron-withdrawing groups to the ring, solvation in polar solvents, and the presence of negatively charged cosolutes tend to favor protonation at the exocyclic amino nitrogen. Nevertheless, none of these factors alone suffice to change the tautomeric preference for the ring-protonated forms. The results point out that the concerted occurrence of the three factors is necessary to shift the tautomeric preference towards the conjugated species protonated at the exocyclic nitrogen.Contribution to the Jacopo Tomasi Honorary Issue     

Magnetic pH-responsive nanogels as multifunctional delivery tools for small interfering RNA (siRNA) molecules and iron oxide nanoparticles (IONPs)

We here exploit pH-responsive nanogels as carriers to deliver functional anti-GFP siRNA and superparamagnetic IONPs to HeLa-GFP cells. The siRNA release via pH-mediated endosomal escape is shown. The IONPs act first as magnetofection agents to boost cellular uptake and then as probes to track the release mechanism by electron microscopy.     

Interplay of Interactions Governing the Dynamic Conversions of Acyclic and Macrocyclic Helicates

Systemic change : A system of transformations between helical structures was observed to be governed by interactions mediated by the electronic effects of substituents, entropic effects, the conformational preferences of organic building blocks, and the coordinative preferences of the metal ion. All of these effects were important, but all must be considered together to allow the prediction of the product observed (see scheme).

     

Synthesis, structure, and reactivity of new tetranuclear Ru-Hbpp-based water-oxidation catalysts

The preparation of three new octadentate tetranucleating ligands made out of two Ru-Hbpp-based units [where Hbpp is 3,5(bispyridyl)pyrazole], linked by a xylyl group attached at the pyrazolate moiety, of general formula (Hbpp)(2)-u-xyl (u = p, m, or o) is reported, together with its dinucleating counterpart substituted at the same position with a benzyl group, Hbpp-bz. All of these ligands have been characterized with the usual analytical and spectroscopic techniques. The corresponding tetranuclear ruthenium complexes of general formula {[Ru(2)(trpy)(2)(L)](2)(μ-(bpp)(2)-u-xyl)}(n+) [L = Cl or OAc, n = 4; L = (H(2)O)(2), n = 6] and their dinuclear homologues {[Ru(2)(trpy)(2)(L)](μ-bpp-bz)}(n+) [L = Cl or OAc, n = 2; L = (H(2)O)(2), n = 3] have also been prepared and thoroughly characterized both in solution and in the solid state. In solution, all of the complexes have been characterized spectroscopically by UV-vis and NMR and their redox properties investigated by means of cyclic voltammetry techniques. In the solid state, monocrystal X-ray diffraction analysis has been carried out for two dinuclear complexes {[Ru(2)(trpy)(2)(L)](μ-bpp-bz)}(2+) (L = Cl and OAc) and for the tetranuclear complex {[Ru(2)(trpy)(2)(μ-OAc)](2)(μ-(bpp)(2)-m-xyl)}(4+). The capacity of the tetranuclear aqua complexes {[Ru(2)(trpy)(2)(H(2)O)(2)](2)(μ-(bpp)(2)-u-xyl)}(6+) and the dinuclear homologue {[Ru(2)(trpy)(2)(H(2)O)(2)](μ-bpp-bz)}(3+) to act as water-oxidation catalysts has been evaluated using cerium(IV) as the chemical oxidant in pH = 1.0 triflic acid solutions. It is found that these complexes, besides generating significant amounts of dioxygen, also generate carbon dioxide. The relative ratio of [O(2)]/[CO(2)] is dependent not only on para, meta, or ortho substitution of the xylylic group but also on the concentration of the starting materials. With regard to the tetranuclear complexes, the one that contains the more sterically constrained ortho-substituted ligand generates the highest [O(2)]/[CO(2)] ratio.