掺杂PbO2/Ti阳极在硫酸铬电氧化过程的电极行为

PbO2/Ti 电极具有耐腐蚀性能好、导电性强、析氧过电位高等优点,已成功地应用在无机和有机化合物电解生产、环境污染控制、阴极保护以及电浮选等方面[1-3].     

分子印迹聚合物填充色谱柱的研究与发展

本文评述了分子印迹聚合物发展历史、制备方法、聚合体系的选择、性能表征及作用机理。主要介绍了其作为色谱固定相方面的应用,并对需解决的问题提出了建议。     

离子液体作为微波吸收剂促进苯甲醛与巴比妥酸的缩合反应

离子液体是纯粹由离子组成的液体,通常由二烷基季铵阳离子与四氟硼酸根、六氟磷酸根、卤素负离子等阴离子组成.离子液体具有强极性、低蒸汽压,对无机和有机物具有良好的溶解性以及对绝大部分试剂稳定等一系列特殊性质,常作为反应介质或催化剂用于有机合成中[1,2].     

反胶束法合成CdS纳米粒子及其表征

以AOT为保护剂,采用反胶束法合成CdS纳米粒子。利用水洗法洗去保护剂AOT,通过加入不同量的无水乙醇调节分散介质的极性,改变CdS纳米粒子在分散介质中的"溶解度",从而实现不同尺寸粒子的分离。采用紫外-可见(UV-vis)吸收光谱、透射电子显微镜(TEM)、荧光光谱法对其进行表征。     

微波法快速合成环金属铂配合物磷光发光材料

采用微波合成法合成了一系列新的含不同β-二酮的环金属铂配合物.在微波反应条件下,反应时间从32h减少到30min左右.同时,对环金属铂配合物的吸收和发射光谱、热稳定性,磷光寿命的影响进行了讨论.     

4,5-二苯基噁唑的荧光性能研究

荧光是物质从激发态失活到多重性相同的低能状态时所释放的辐射.自二十世纪初以来,有机荧光材料广泛用于纺织、塑料着色及印刷颜料,此外它在药物学、生物学、环境科学、信息科学方面都有广阔的应用前景.     

三氯化镱催化丙烯酸酯与呋喃成环反应的研究

D iels-A lder反应具有立体专一性和很好的区域选择性,已被大量应用于天然有机化合物、香料、药物等的合成中。一般说来,D iels-A lder反应在加热条件下即能发生,但加热往往导致反应的区域选择性和立体专一性下降,而研究表明,路易斯酸催化下的D iels-A lder反应在不同程度上表现出或反应速度加快,或产率提高,或条件温和,尤其是区域选择性和立体专一性得到提高等良好特性。呋喃类化合物由于呋喃环所具有的芳香性而较难与一般的亲双烯发生D iels-A lder反应。如呋喃和丙烯酸甲酯在加热条件下反应2~3个月,产率只能达到50%,且反应温度的提高…     

氘核削裂反应理论研究及其进展

氘核削裂反应作为单核子转移反应的一种,在原子核的单粒子结构研究中一直起着重要的作用.同时,作为典型的三体核反应,它也是直接核反应理论研究的一个重要研究对象.本文简述了氘核削裂反应的研究历史,侧重介绍其反应理论的演进,以及平面波玻恩近似(Plane Wave Born Approximation,PWBA)、扭曲波玻恩近...     

Syntheses and Crystal Structures of Two Coordination Polymers with Aromatic Dioxide as Bridge Ligands

Two coordination polymers, namely, two-dimensional complex 1 {[Cu(μ- L)1.5(ClO4)2(H2O)].(H2O)0.5}n (L = pyrazine-1,4-dioxide) and one-dimensional complex 2 [Co(μ-L)Br2(H2O)2]n, have been synthesized with pyrazine-1,4-dioxide as bridging ligands, and their crystal structures were determined by X-ray crystallography. Crystal data for complex 1: monoclinic system, space group C2/c, with a = 23.310(3), b = 12.2338(17), c = 10.6075(15) , β = 110.487(2)°, V = 2833.6(7) 3, Z = 8, C6H9Cl2CuN3O12.5, Mr = 457.60, Dc = 2.145 g/cm3, F(000) = 1832 and μ = 1.998 mm-1; and those for 2: monoclinic system, space group C2/c, with a = 11.012(3), b = 7.483(2), c = 11.451(3) , β = 101.654(4)°, V = 924.2(4) 3, Z = 4, C4H8Br2CoN2O4, Mr = 366.87, Dc = 2.637 g/cm3, F(000) = 700 and μ = 10.487 mm-1. 1 shows a two-dimensional sheet structure on the ac plane through the coordination of μ-L bridging ligands with Cu(II) ions, while 2 displays a zigzag one-dimensional chain along the c axis via the coordination of μ-L bridging ligand with Co(II) ions. Hydrogen bonds in 1 and 2 make the sheets (or chains) connect each other to form a three-dimensional structure.     

Dislocation Analysis for Large-sized Sapphire Single Crystal Grown by SAPMAC Method

In this paper,large-sized sapphire (230×210 mm,27.5 kg) was grown by SAPMAC method (sapphire growth technique with micro-pulling and shoulder-expanding at the cooled center). Dislocation peculiarity in large sapphire boule (0001) basal plane was investigated by chemical etching,scanning electron microscopy and X-ray topography method. The triangular dislocation etch pit measured is 7.6×101～8.0×102 cm-2,in which relative high-density dislocations were generated at both initial and final stages of crystal growth. The analysis of single-crystal X-ray topography shows that there are no apparent sub-grain boundaries; the dislocation lines are isolated and straight. Finally,the origins of low-density dislocation in sapphire crystal are discussed by numerical analysis method.