The practice for eight-year operation of the cobalt-60 irradiation facility at Beijing Radiation Application Research Center

The radiation facility was made by Sulzer Company in Switzerland. The designed capacity is 3.7 × 10¹⁶Bq( 1MCi) and 12.21 × 10¹⁵Bq(330kCi)of Cobalt -60 source was loaded at the first phase. Current cobalt -60 source-loading is 2.4 × 10¹⁶Bq(650kCi). The equipment assembling and installation regulating and testing were completed at the end of 1988. The facility was put into commissioning in 1989. It operates 7000–8000 hours per year. The facility has been utilized to carry out many research work and irradiate many kinds of items. Lots of economical benefits have been gained since then. Now it is becoming a radiation processing model base in China. This paper summarized the strong and weak points of the design of the facility through in eight years' practice and analysed the economical benefits.     

Two New Acetylenic Compounds from Asparagus gobicus

Two new acetylenic compounds were isolated from the roots of Asparagus gobicus. Their structures were elucidated by spectroscopic methods including 2D NMR techniques.     

Covalent attachment of phospholipid analogous polymers to modify a polymeric membrane surface: a novel approach

A novel method for the surface modification of a microporous polypropylene membrane by tethering phospholipid analogous polymers (PAPs) is given, which includes the photoinduced graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA) and the ring-opening reaction of grafted poly-(DMAEMA) with 2-alkyloxy-2-oxo-1,3,2-dioxaphospholanes. Five 2-alkyloxy-2-oxo-1,3,2-dioxaphospholanes, containing octyloxy, dodecyloxy, tetradecyloxy, hexadecyloxy, and octadecyloxy groups in the molecular structure, were used to fabricate the PAP-modified polypropylene membranes. The attenuated total reflectance FT-IR spectra of the original, poly(DMAEMA)-grafted, and PAP-modified membranes confirmed the chemical changes on the membrane surface. Scanning electron microscope pictures showed that, compared with the original membrane, the surface porosities ofpoly(DMAEMA)-grafted and PAP-modified membranes were somewhat reduced. Water contact angles measured by the sessile drop method on PAP-modified membranes were slightly lower than that on the original polypropylene membrane, but higher than those on poly(DMAEMA)-grafted membranes with the exception of octyloxy-containing PAP-modified membranes. However, BSA adsorption experiments indicated that the five PAP-modified membranes had a much better protein-resistant property than the original polypropylene membrane and the poly(DMAEMA)-grafted membranes. For hexadecyloxy- and octadecyloxy-containing PAP-modified membranes, almost no protein adsorption was observed when the grafting degree was above 6 wt %. It was also found that the platelet adhesion was remarkably suppressed on the PAP-modified membranes. All these results demonstrate that the described approach is an effective way to improve the surface biocompatibility for polymeric membranes.     

异核双金属有机化合物的合成方法与反应性能研究

本文对近年来异核双金属有机化学的发展作了简要的介绍和回顾, 文中对含金属-金属键和不含金属-金属键的d/d和d/f异核双金属有机化合物的合成方法及反应性能作了归纳。     

A New Sesquiterpene Lactone from Ainsliaea bonatii

A new sesquiterpene lactone, Ainsliaolide A, was isolated from Ainsliaea bonatii. The structure was determined on the basis of spectral data.     

Synthesis and structural characterization of 3-thienyl alkyl imides

Five new thiophene imides having the structures C₄H₃SC(O)N(H)C(O)R (where R=Me, Et, Pr, t-Bu, 1-4) and C₄H₃SCH₂C(O)N(H)C(O)CH₃5 have been prepared. Control over the orientation of the carbonyl groups was achieved by the introduction of a bulky group in the terminal position of the side chain, and molecular modeling calculations indicated that the energy difference between the ct and tt conformations is small. The acidity of 1-4 decreases from Me to t-Bu, and, although 1-4 will not undergo oxidative polymerization, the introduction of a single spacer CH₂ group allows 5 to polymerize.     

SUPER TOUGH GELS WITH A DOUBLE NETWORK STRUCTURE

 Living tissues work with fantastic functions in soft and wet gel-like state. Thus, hydrogels have attracted much attention as excellent soft & wet materials, suitable for making artificial organs for medical treatments.However, conventional hydrogels are mechanically too weak for practical uses. We have created double network (DN) hydrogels with extremely high mechanical strength in order to overcome this problem. DN gels are interpenetrating network (IPN) hydrogels consisting of rigid polyelectrolyte and soft neutral polymer. Their excellent mechanical properties cannot be explained by the standard fracture theories. In this paper, we discuss about the toughening mechanism of DN gels in accordance with their characteristic behavior, such as large hysteresis and necking phenomenon. We also describe the results on tissue engineering application of DN gels.     

WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

健康猕猴血液和毛发微量元素含量的正常值测定和差异比较

对猕猴(Macaca mulatta)血液和毛发的镁、锰、钼、镍、铅、铬、镉、锌、铁、铜、钙等11种元素的含量，用电感耦合高频等离子体发射光谱仪进行了测定．给出了各个元素在血液和毛发中的平均含量值和变动范围．指出毛发中的微量元素含量一般较血液为高，且变动较小．与人体内含量比较，猴毛发的Cu、Mo、CA、Ni的含量与人发接近；猴血液的Zn、Fe、Ca、Mn、Ca亦与人的接近．对猴血液微量元素含量随年龄、体重、性别变化及血液含量和毛发含量的相关关系进行了统计学检验．通过对测定值的比较分析，认为尽管动物体内的微量元素含量随种类、环境、个体差异变化较大，就群体平均含量而言，仍存在着相似的变化规律。本文的测定结果对了解猕猴对微量元素的需要提供了初步依据．