All-solution-processed PIN architecture for ultra-sensitive and ultra-flexible organic thin film photodetectors

An ideal organic thin film photodetectors (OTFPs) should adopt a hierarchical, multilayer p-type/blend-type/n-type (PIN) structure, with each layer having a specific purpose which could greatly improve the exciton dissociation while guarantee efficient charge transport. However, for the traditional layer-by-layer solution fabrication procedure, the solvent used can induce organic material mixing and molecular disordering between each layer. Hence, such architecture for OTFPs can now only be formed via thermal evaporation. In this paper, a contact-film-transfer method is demonstrated to all-solution processing organic PIN OTFPs on flexible substrates. The fabricated PIN OTFPs exhibit high photoresponse and high stability under continuous mechanical bending. Hence, the method we described here should represent an important step in the development of OTFPs in the future.     

改性阳离子交换树脂的制备、表征及催化合成双酚F

用浸渍法制备了改性阳离子交换树脂,通过红外光谱、热重分析和扫描电镜等对其进行了分析,探讨了不同改性树脂对以苯酚和甲醛为原料催化合成双酚F收率的影响。当等摩尔比Al Cl3和Ti Cl4加入总量为树脂质量的8%,反应温度为80℃,改性时间为10h,Al Cl3-Ti Cl4改性阳离子交换树脂催化合成双酚F,其收率高达90.02%,比未改性或Al Cl3单独改性树脂的催化效果都好,其重复利用率也优于后两者。结果说明,Al Cl3-Ti Cl4改性阳离子交换树脂催化性能好,是一种环境友好高效合成双酚F的催化剂。     

Magnetization switching modes in nanopillar spin valve under the external field

The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization ...     

交换半环中理想的实根

在交换半环范畴中引进和研究理想的实根,从而将实代数学中有关结果推广到交换半环上。如下结果被建立:在半环中,一个理想的实根恰等于包含该理想的所有实理想的交集,并也恰等于包含该理想的所有实素理想的交集。此外,形式更为一般的理想的实根--广义实根被考虑,并获得相应的结果。     

导热增强聚乙二醇相变复合材料的制备及其性能

本文以聚乙二醇(PEG)为相变材料,通过添加不同的无机填料,采用熔融共混浇筑方式制备了导热增强型相变复合材料。 通过扫描电子显微镜(SEM)、热常数分析仪、差示扫描量热仪(DSC)、红外热成像和热重分析仪研究了所制备复合材料的微观结构、导热性能与相变过程。 研究结果表明,相比于碳酸钙和氧化铝,在相同添加含量下,氮化硼(BN)可有效提高PEG的导热系数,当BN质量分数为40%时,导热系数可达到3.40 W/(m·K);当填料添加量相同时,片状BN和不规则纳米碳酸钙(CaCO₃)比球形氧化铝(Al₂O₃)对PEG具有更加优良的定型效果,在相变过程中,能够更加有效阻隔PEG的流动,保持复合材料的形状稳定性。     

Correlation between Boron Isotope of Coral Acropora and pH Value of Seawater Surface

A water circulation system with the almost same element composition and socket type was adopted in coral Acropora culture under different seawater pH value conditions and the data of the relationship between boron isotopic compositions of coral and seawater pH value by thermoelectric ionization mass spectrometer were obtained. According to the correlations between α_carb-3 of coral and the pH value of cultured seawater, α_carb-3 was not a constant but related to pH value, indicating that B(OH)₃ also incorporated carbonate. Therefore, the theoretical formula could not be used to calculate the seawater pH value from the δ¹¹B_carb value of the measured marine biological carbonate. The empirical equations obtained experimentally would be an alternative method to calculate the seawater pH value. In addition, the mixed precipitation of CaCO₃ and Mg(OH)₂ was found in aquaculture tanks with high pH value, and the δ¹¹B of the solid was significantly higher than that of cultured seawater. The result indicated that the presence of Mg(OH)₂ had a significant effect on the boron isotope fractionation, which deserved our attention.     

基于演化博弈的公共交通、共享汽车与私家车的博弈分析

出行者的选择行为分析是交通系统中的一项重要内容,随着城市的发展,交通出行方式大体分为三大类:公共交通出行、辅助公共交通出行和私人交通出行。本文在以往的研究基础上,采用演化博弈的方法研究公共交通、共享汽车以及私家车三者之间的博弈关系,模拟出行者的选择行为,分析博弈均衡点稳定性及参数条件。通过模型仿真实验,演化结果中各项比例大小取决于各项收益、补贴、损失以及额外收益,要增加公共交通的配套设施,增收拥堵费以及增加对共享汽车的补贴及配套服务。     

Microstructure change in deuterium implanted CLAM steel induced by electron irradiation

As Reduced Activation Ferritic/Martensitic (RAFM) steel is considered the primary candidate for use as a structural material in fusion power reactors,many countries are developing different kinds of RAFM.China is developing new CLAM (China Low Activation Martensitic) steel.The study investigates microstructural changes in CLAM steel implanted with deuterium ions induced by 1250 keV electron irradiation from R.T.to 873 K,and observes both the growth and shrinkage of the defect clusters produced by deuterium ...     

Analysis on First-stage Ignition of n-Heptane at Low Temperatures with a Lumped Skeletal Mechanism

Two-stage ignition exists in the low-temperature combustion process of n-heptane and the first-stage ignition also shows a negative temperature coefficient(NTC) phenomenon. To study key reactions and understand chemical principles affecting the first-stage ignition of n-heptane, a lumped skeletal mechanism with 62 species is obtained based on the detailed NUIGMech1.0 mechanism using the directed relation graph method assisted by sensitivity analysis and isomer lumping. The lumped mechanism shows good performance on ignition delay time under wide conditions. The study revealed that the temperature after the first-stage ignition is higher and a larger amount of fuel is consumed at lower initial temperatures. The temperature at the first-stage ignition is relatively insensitive to the initial temperature. Further sensitivity analysis and reaction path analysis carried out based on the lumped mechanism show that the decomposition of RO₂ to produce alkene and HO₂is the most important reaction to inhibit the first-stage ignitions. The chain branching explosion closely related to the first-stage ignition will be terminated when the rate constant for the RO₂ decomposition is larger than that of the isomerization of RO₂ to produce QOOH. The NTC behavior as well as other characteristics of the first-stage ignition can be rationalized from the competition between these two reactions.