具有双荧光发射的螺吡喃的合成与性质研究

设计合成了未见文献报道的含有双官能团的螺吡喃类化合物1,通过红外光谱、核磁共振氢谱、碳谱和高分辨质谱对其结构进行了确证。紫外可见吸收光谱表明化合物在有机溶剂中的光致变色性良好;化合物的乙醇溶液在365 nm光激发时产生双荧光发射,分别为闭环体和开环体所对应的的荧光峰。本文首次从场效应角度推测了螺吡喃吲哚林N原子上含有极性基团时开环体稳定的原因。     

导热增强聚乙二醇相变复合材料的制备及其性能

本文以聚乙二醇(PEG)为相变材料,通过添加不同的无机填料,采用熔融共混浇筑方式制备了导热增强型相变复合材料。 通过扫描电子显微镜(SEM)、热常数分析仪、差示扫描量热仪(DSC)、红外热成像和热重分析仪研究了所制备复合材料的微观结构、导热性能与相变过程。 研究结果表明,相比于碳酸钙和氧化铝,在相同添加含量下,氮化硼(BN)可有效提高PEG的导热系数,当BN质量分数为40%时,导热系数可达到3.40 W/(m·K);当填料添加量相同时,片状BN和不规则纳米碳酸钙(CaCO₃)比球形氧化铝(Al₂O₃)对PEG具有更加优良的定型效果,在相变过程中,能够更加有效阻隔PEG的流动,保持复合材料的形状稳定性。     

Correlation between Boron Isotope of Coral Acropora and pH Value of Seawater Surface

A water circulation system with the almost same element composition and socket type was adopted in coral Acropora culture under different seawater pH value conditions and the data of the relationship between boron isotopic compositions of coral and seawater pH value by thermoelectric ionization mass spectrometer were obtained. According to the correlations between α_carb-3 of coral and the pH value of cultured seawater, α_carb-3 was not a constant but related to pH value, indicating that B(OH)₃ also incorporated carbonate. Therefore, the theoretical formula could not be used to calculate the seawater pH value from the δ¹¹B_carb value of the measured marine biological carbonate. The empirical equations obtained experimentally would be an alternative method to calculate the seawater pH value. In addition, the mixed precipitation of CaCO₃ and Mg(OH)₂ was found in aquaculture tanks with high pH value, and the δ¹¹B of the solid was significantly higher than that of cultured seawater. The result indicated that the presence of Mg(OH)₂ had a significant effect on the boron isotope fractionation, which deserved our attention.     

基于演化博弈的公共交通、共享汽车与私家车的博弈分析

出行者的选择行为分析是交通系统中的一项重要内容,随着城市的发展,交通出行方式大体分为三大类:公共交通出行、辅助公共交通出行和私人交通出行。本文在以往的研究基础上,采用演化博弈的方法研究公共交通、共享汽车以及私家车三者之间的博弈关系,模拟出行者的选择行为,分析博弈均衡点稳定性及参数条件。通过模型仿真实验,演化结果中各项比例大小取决于各项收益、补贴、损失以及额外收益,要增加公共交通的配套设施,增收拥堵费以及增加对共享汽车的补贴及配套服务。     

Microstructure change in deuterium implanted CLAM steel induced by electron irradiation

As Reduced Activation Ferritic/Martensitic (RAFM) steel is considered the primary candidate for use as a structural material in fusion power reactors,many countries are developing different kinds of RAFM.China is developing new CLAM (China Low Activation Martensitic) steel.The study investigates microstructural changes in CLAM steel implanted with deuterium ions induced by 1250 keV electron irradiation from R.T.to 873 K,and observes both the growth and shrinkage of the defect clusters produced by deuterium ...     

Analysis on First-stage Ignition of n-Heptane at Low Temperatures with a Lumped Skeletal Mechanism

Two-stage ignition exists in the low-temperature combustion process of n-heptane and the first-stage ignition also shows a negative temperature coefficient(NTC) phenomenon. To study key reactions and understand chemical principles affecting the first-stage ignition of n-heptane, a lumped skeletal mechanism with 62 species is obtained based on the detailed NUIGMech1.0 mechanism using the directed relation graph method assisted by sensitivity analysis and isomer lumping. The lumped mechanism shows good performance on ignition delay time under wide conditions. The study revealed that the temperature after the first-stage ignition is higher and a larger amount of fuel is consumed at lower initial temperatures. The temperature at the first-stage ignition is relatively insensitive to the initial temperature. Further sensitivity analysis and reaction path analysis carried out based on the lumped mechanism show that the decomposition of RO₂ to produce alkene and HO₂is the most important reaction to inhibit the first-stage ignitions. The chain branching explosion closely related to the first-stage ignition will be terminated when the rate constant for the RO₂ decomposition is larger than that of the isomerization of RO₂ to produce QOOH. The NTC behavior as well as other characteristics of the first-stage ignition can be rationalized from the competition between these two reactions.     

TBAB包络化合物浆的管内流动再层流化现象

TBAB包络化合物浆是一种新型高密度潜热输送材料,在中央空调或区域供冷等系统中作为替代常规冷水的冷量输送媒体具有显著的节能应用前景.采用实验方法研究了A型TBAB包络化合物浆在水平直管内的层流和湍流流动特性.通过分析流动阻力随流速和固相含量等参数的变化规律,发现固相含量的增加有利于维持流动的层流趋势,在定流速条件下随着固相含量的增加流动状态会由湍流转变为层流,即出现"再层流化"现象,并且由于再层流化现象的出现,包络化合物浆的流动会出现"阻力降低区".     

低钾血症对颅脑创伤患者预后的影响

目的 探讨低钾血症在颅脑创伤患者中的发病情况及其与预后的关系。方法 2010 年6月至2013 年6 月共有168 例住院期间出现低钾血症且年龄≥18 岁的颅脑创伤患者纳入研究。依据低钾血症严重程度的不同,将患者分成轻度组（3.00mmol/L≤血钾＜3.50mmol/L）、中度组（2.50mmol/L≤血钾＜3.00mmol/L）和重度组（血钾＜2.50mmol/L）,各组均采用患者血钾的最低值进行数据分析。高钠血症和低磷血症分别被定义为血钠＞147.00mmol/L 和血磷＜0.80mmol/L。结果 受试患者的血钾在1.10~3.40mmol/L,平均2.90mmol/L。当血钾出现最低值时,与其余两组比较,重度组患者具有更高的血钠和更低的血磷水平（均P＜0.01）。与轻度组（10.5%）或中度组（25.7%）相比,重度组患者的病死率（82.1%）显著上升（均P＜0.01）。多变量逻辑回归分析结果显示,低格拉斯哥昏迷评分（OR=1.28,95%CI=1.12~1.42,P＜0.01）、低血钾（OR=5.57,95%CI=2.76~10.93,P＜0.01）、低血磷（OR=2.76,95%CI=1.11~7.25,P＜0.01）以及高血尿素氮（OR=1.16,95%CI=1.07~1.24,P＜0.01）是导致患者死亡的独立危险因素。结论 颅脑创伤患者是出现低钾血症的高危人群,重度低钾血症的患者更容易合并高钠血症和低磷血症。重度低钾血症和低磷血症是颅脑创伤患者死亡的独立危险因素。     

重度子痫前期产妇剖宫产布比卡因蛛网膜下腔阻滞麻醉适合剂量的临床研究

目的 探讨重度子痫前期产妇剖宫产重比重布比卡因蛛网膜下腔阻滞麻醉（腰麻）的适合剂量。方法 选取200例重度子痫前期产妇,ASAⅠ级或Ⅱ级,按随机数字表法分为4组,每组各50 例,相应各组鞘内注入布比卡因剂量分别为10、8、6 及4mg,并混合2.5μg 舒芬太尼。选择L3~4行腰硬联合穿刺,注药10min 后记录麻醉平面。根据结果进行Probit 回归分析,计算布比卡因腰麻的ED50和ED95。观察各组利多卡因及去氧肾上腺素的用量、肌松效果及患者麻醉满意度,观察各组术中并发症以及新生儿的Apgar 评分和脐动脉pH。结果 重度子痫前期患者腰麻剖宫产布比卡因ED50 和ED95分别为：6.51（95%CI：5.81～7.01）和8.68（95%CI：7.96～10.26）。4 组患者10min 后麻醉平面的差异均有统计学意义（均P＜0.05）。4mg 组利多卡因用量高于其他3组,差异有统计学意义（P＜0.05）。8mg 组、10mg 组去氧肾上腺素的用量高于其他两组,差异均有统计学意义（均P＜0.05）。低血压的发生率8mg 组、10mg 组高于其他两组,差异均有统计学意义（均P＜0.05）。４ 组间其他不良反应恶心、呕吐、寒战以及心动过缓发生率的差异无统计学意义（P＞0.05）。4 组胎儿娩出后1、5min Apgar 评分及脐动脉血气分析的结果差异均无统计学意义（均P＞0.05）。结论 重度子痫前期产妇剖宫产鞘内注入6mg 布比卡因混合2.5μg舒芬太尼,必要时辅以硬膜外麻醉,麻醉效果确切,血流动力学稳定,适合该类患者手术麻醉。     

富锂层状正极材料Li2Mn1-xTixO3的合成及电化学性能

应用简单的高温固相烧结法合成了Ti掺杂改性的Li₂MnO₃材料。电子扫描显微镜、X射线衍射以及X射线光电子能谱分析表明Ti元素取代Mn离子掺入到Li₂MnO₃晶格中,且掺杂能有效地抑制一次颗粒的团聚。电化学阻抗和恒流充放电测试结果表明,在2.0~4.6 V的电压窗口下,掺杂改性的样品Li₂Mn_0.9Ti_0.03O₃的首圈放电比容量达到209 mAh·g^-1,库仑效率为99.5%,循环40圈后容量保持率为94%;当电流密度增大到400 mA·g^-1时,掺杂改性的样品仍然可以放出120 mAh·g^-1比容量,远高于同等电流密度下未掺杂的Li₂MnO₃原粉的比容量（52 mAh·g^-1）。Ti掺杂可有效地改善Li₂MnO₃的循环稳定性和倍率性能,有利于促进该材料的商业化应用。