High pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) and CuTCNQ

The high-pressure Raman studies of 7,7,8,8-tetracyanoquinodimethane (TCNQ) single crystals and polycrystalline CuTCNQ are presented in this paper. TCNQ shows a phase transition at 22 kbar, a pressure higher than reported earlier. CuTCNQ undergoes a first order phase transition at 30 kbar, which is characterized by the abrupt disappearance of all the Raman bands.     

Strategies for multi-site GLP studies

 A GLP study can be performed at more than one site. This is called a multi-site study. Although, the study is performed at different sites, it is still one study and must completely comply with the GLP principles. The fact that different activities are conducted at different sites implies that the planning, the organization and the communication are crucial for the success of the study. This means that all the staff involved should know their responsibilities and should have the knowledge and skills to realize all the phases of the study according to the GLP principles. To achieve a well managed multi-site study, several strategies for setting up such a study can be followed. This paper focuses on the responsibilities, communication, and collaboration of the personnel, which are involved in a multi-site study. Several case studies are highlighted, and we concluded that the basic communication triangle in a single-site GLP study between test facility management, study director, and the quality assurance unit should be extended to the communication among test facility and test site management, study director, principle investigator(s), and the quality assurance units at the test sites. Introduction Received: 14 August 2002 Accepted: 26 November 2002     

Electrocatalytic activity of binary Palladium Ruthenium anode catalyst on Ni-support for ethanol alkaline fuel cells

In search for a cheaper anode catalyst for the oxidation of ethanol for development of direct alcohol fuel cells, Pd has been considered here as an interesting substitute for Pt in Pt Ru binary electrodeposite. The binary catalyst when co-deposited on nickel support has been found to increase the current density and decrease the anodic overvoltage significantly with respect to pure Pt, Pd and Ni. Its electrocatalytic capability is also comparable with that of the Pt-Ru binary electrocatalyst on Ni-support, when studied in 1 M EtOH containing 1 M NaOH solution. The effect of loading of Pd Ru electrocatalyst on Ni support has also been tested. The electrocatalytic activity of the electrodes for oxidation of ethanol has been explained by studies of cyclic voltammetry, chronopotentiometry, steady-state polarization, and conjugated scanning electron microscopy–energy dispersion X-ray spectroscopy. It has been found that electrode containing the higher amount of deposit are less affected by carbonaceous poisons.     

Condensation of 4-aryl-4-oxobutanoic acids with benzylamines: Synthetic and structural studies on 1-arylmethyl-3-[(<Emphasis Type="Italic">E</Emphasis>)-1-arylmethylidene]-5-phenyl-2,3-dihydro-1H-2-pyrrolones

The microwave-mediated reaction of 4-aryl-4-oxobutanoic acids with benzylamines furnished 1-arylmethyl-3-[(E)-1-arylmethylidene]-5-phenyl-2,3-dihydro-1H-pyrrolones. This result is in contract to the earlier report on this reaction conducted under neat conditions. Structures for the products were assigned on the basis of spectral data and confirmed by independent synthesis. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 368–373, March, 2007.     

Micellar effects on the electrochemistry of dopamine and its selective detection in the presence of ascorbic acid

The electrochemistry of dopamine (3-hydroxytyramine) was studied by cyclic voltammetry at a glassy carbon electrode in the presence of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) micelles at different pH. The anodic peak potential (E(pa)) and peak current (I(pa)) were found to be remarkably dependent on the charge and the concentration of the surfactant. The E(pa) and I(pa) change abruptly around the critical micellar concentration (CMC) of the surfactants and reach a plateau above the CMC. The E(pa) at the plateau shifts to more positive values in the cationic CTAB micellar solution, e.g. from 180 mV vs SCE in aqueous solution at pH 6.8 to 410 mV in CTAB micelle, whilst it shifts to less positive values in the anionic SDS micellar solution, e.g. 150 mV at pH 6.8. Therefore, the overlapped anodic peaks of dopamine and ascorbic acid in the mixture of the two compounds in aqueous solutions can be separated in CTAB micelles since the micelle shifts the E(pa) of ascorbic acid to less positive values. The two peaks are separated by ca. 400 mV at pH 6.8 in CTAB micelle, hence dopamine can be determined in the presence of 100 times excess of ascorbic acid. In SDS micelle and in the presence of ascorbic acid, the I(pa) of dopamine is greatly enhanced due to the catalytic oxidation of the latter that enables quantitative determination of both compounds.     

A new route to semirigid poly(amide-ester)s with ordered structure

Four novel semirigid poly(amide-ester)s having the same ordered amide-amide-ester-ester (-AAEE-) and the same or the different phenyl structure were synthesized from the various combination of active acylamide of benzotriazole (HBT) such as 1,1′-(isophthaloyl)bisbenzotriazole (IPBBT) and 1,1′-(terephthaloyl)bisbenzotriazole (PBBT) with diols such as N,N'-bis(2-hydroxyethyl)isophthamide (HEIPA) and N,N'-bis(2-hydroxyethyl)terephthamide (HEPTA) which prepared from the selective N-acylation of IPBBT or PBBT with aminoethanol in excellent yield at room temperature. Before the preparation of diol monomers, a model reaction of selective N-acylation was also completed from active monoacylamide of benzotriazole, 1-benzoylbenzotriazole with aminoethanol. The ordered structure of poly(amideester)s were characterized by infrared (IR) and NMR spectra. On the bases of different reactivity between selective N-acylation and O-acylation of active acylamide of benzotriazole, poly(amide-ester)s having the ordered AAEE and the same phenyl structure were also readily synthesized from the IPBBT or PBBT with aminoethanol under mild conditions by one-bath process.     

A new isoprenyl phenyl ether compound from mangrove fungus

A new isoprenyl phenyl ether, 3-hydroxy-4-(3-methylbut-2-enyloxy)benzoic acid methyl ester (1), together with 4-hydroxybenzoic acid (2), 2-hydroxy-6-methylbenzoic acid (3), and 4-hydroxy-3-methoxybenzoic acid (4) were isolated from Mangrove fungus (No. B60) from the South China Sea. The structures of the compounds were established on the basis of NMR spectroscopic and mass spectrometric data. In the preliminary bioassay, compound 1 exhibited antibacterial and antifungal activities. Compound 1 also inhibited cytotoxicity to the hepG2 cell line with an IC₅₀ value of 10.0 μg/mL. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 313–314, July–August, 2007.     

Global Forcing Number of Benzenoid Graphs

A global forcing set in a simple connected graph G with a perfect matching is any subset S of E(G) such that the restriction of the characteristic function of perfect matchings of G on S is an injection. The number of edges in a global forcing set of the smallest cardinality is called the global forcing number of G. In this paper we prove several results concerning global forcing sets and numbers of benzenoid graphs. In particular, we prove that all catacondensed benzenoids and catafused coronoids with n hexagons have the global forcing number equal to n, and that for pericondensed benzenoids the global forcing number is always strictly smaller than the number of hexagons.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Kinetic modelling of the thermal oxidation of polyisoprene elastomers. Part 1: Unvulcanized unstabilized polyisoprene

The thermal oxidation of an unvulcanized, unstabilized polyisoprene rubber (IR) has been studied in the 40-140 °C temperature range. Ageing was monitored by FTIR determination of double bonds and carbonyl groups, mass uptake measurement, and weight average molar mass determination. A mechanistic scheme based on the standard scheme for radical chain oxidation, but taking into account the diversity of initiation processes and the existence of inter- and intramolecular radical additions to double bonds, was built. The kinetic model derived from this scheme is composed of seven differential equations to be solved in discrete thickness layers to take into account the kinetic control by oxygen diffusion. This system was numerically solved using a Matlab program dedicated to stiff systems of differential equations. The elementary rate constants and other kinetic parameters were then determined from experimental data, using an inverse approach. A set of physically reasonable parameter values was obtained, thus allowing us to envisage lifetime predictions at low temperature (long term). The results led to observations difficult to make from classical analytical studies, for instance the predominance of bimolecular hydroperoxide decomposition among other initiation modes or the competition between intermolecular hydrogen abstraction and intramolecular addition of peroxy radicals to double bonds.