Hydrophilic Treatment of the Dyed Nylon-6 Fabric using High-density and Extensible Antenna-coupling Microwave Plasma System

High density and well surface-distributed oxygen microwave plasma with an extensible antenna-coupling design was utilized to modify a densely weaved and large-surface-area Nylon-6 fabric within a short treatment time. Plasma pretreatment and subsequent acrylic acid (AAc) or 2-hydroxyethyl methacrylate (HEMA) grafting process were studied and optimized at the stage after dyed and finished procedure. The monomer-grafted dyed Nylon-6 fabrics evolved lasting hydrophilic properties and thereafter created or improved surface properties such as water diffusion, drainage, moisture regain and water absorbency, in different degrees. The pHEMA-grafted sample exhibited minor effect in color perception, which was also much hydrophilic than the pAAc-grafted one. Based upon surface analyses and wetting assessment, the penetration of HEMA monomer into the plasma-treated fabric matrix contributed to the facilitation of wetting properties. This work accordingly ensures such plasma-induced system to incorporate with the pattern of hydrophilic properties on the analogous textiles without interrupting their finishing process.     

铈、镨二乙基磷酸盐的晶体结构

合成了Ce[PO_2(OC_2H_5)_2]_3和Pr[PO_2(OC_2H_5)_2]_3(简称Ce(DEP)_3和Pr(Pr(DEP)_3)。用四圆衍射仪测定了其晶体结构。它们均属三斜晶系,空间群P1。晶胞参数,对Ce(DEP)_3:α=10.324(4)A,b=12.861(4)A,c=13.998(5)A,x=106.49(3)°,β=112.83(4)° γ=115.61(3)°,V=1296(1)A~3,Z=2;对Pr(DEP)_3:α=10.27(1)A,b=11.81(1)A,c=12.51(1)A,x=109.93(9)°,β=111.9(9)°,γ=93.0(1)°,V=1293(3)A~3,Z=2。用Patterson法并经分块全矩阵最小二乘法修正,最后的R值,Ce的为0.1071,Pr的为0.1066。结构分析指出,两种配合物结构类似,Ce和Pr原子均由二乙基磷酸根的六个氧原子配位形成八面体构型。     

羧基膦－钯－酸体系催化烯烃氢酯基化反应

以钯－膦－酸体系催化烯烃氢酯基化的反应日显重要，而膦配体是决定此反应的重要因素，用二苯基膦乙酸（ＤＰＡ）为配体的钯催化剂体系，对烯烃的氢酯基化反应作了研究。对影响反应的各种因素如反应温度、反应压力、不同的溶剂、膦配体及酸助剂的量等作了考察，发现此配体对烯烃的区域选择性有改善。并用此催化体系对不同结构的烯烃进行了研究，发现有如下的活性顺序：环烯烃＞直链端烯＞直链内烯。     

偶合反应化学发光法测定痕量银的研究

本将Ａｇ（Ⅰ）催化Ｓ２Ｏ＾２－８氧化Ｍｎ（Ⅱ）生成ＭｎＯ＾－４的催化反应与ＬｕｍｉｎｏｌＭｎＯ＾－４－ＯＨ＾－的化学发光反应相偶合，建立起一种新的灵敏测定痕量银的化学发光分析法，在所研究的优化条件下，该法测定银的选择性较好，检测限达到３．２×１０＾－１２ｇ／ｍＬＡｇ线性浓度范围为１．０×１０＾－１１－１．０×１０＾－５ｇ／ｍＬＡｇ，用于水样分析，结果较为满意。     

Electrocatalysis of the SiC Particle‐Modified Glassy Carbon Electrode for the Oxidation of Adrenaline

The electrocatalytic properties of the SiC particle‐modified glassy carbon electrode (MGC) for adrenaline oxidation were studied by cyclic voltammetry (CV), double‐potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques in McIlvaine buffer solution. It was shown that the electrode modified with SiC particles markedly displayed an electrocatalytic effect on the process of the electrochemical reaction of adrenaline, i.e., the activity and the reversibility of the MGC electrode has been significantly improved. This was attributed to the adsorption effect of the electroactive adrenaline molecules on the MGC electrode surface.     

THE VISCOELASTIC EFFECT ON THE FORMATION OF MESO-GLOBULAR PHASE OF DILUTE HETEROPOLYMER SOLUTIONS

Linear homopolymer chains in poor solvent exist either as individual crumpled single chain globules or asmacroscopic precipitate, depending on whether the solution is in the one- or the two-phase region. However, linearheteropolymer chains in dilute solution might be able to form stable mesoglobules made up of a limited number of chains ifthe degree of amphiphilicity of the chain is sufficiently high and the experimental conditions are appropriate. The self-assembly of block copolymers in a selective solvent is typical of such examples. In practice, the formation of stablemesoglobules can be directly related to the formation of novel polymeric nanopaticles in solution. In this article, we willaddress the formaton of mesoglobular phase not only on the basis of thermodynamics, but also from a kinetic point of view,which leads to the discussion of how viscoelasticity can affect the phase behavior of heteropolymer chains in dilute solution.The formation and stabilization of several different kinds of novel polymeric nanopedicles will be used to illustrate ourdiscussion.     

QSAR models using a large diverse set of estrogens

Endocrine disruptors (EDs) have a variety of adverse effects in humans and animals. About 58,000 chemicals, most having little safety data, must be tested in a group of tiered assays. As assays will take years, it is important to develop rapid methods to help in priority setting. For application to large data sets, we have developed an integrated system that contains sequential four phases to predict the ability of chemicals to bind to the estrogen receptor (ER), a prevalent mechanism for estrogenic EDs. Here we report the results of evaluating two types of QSAR models for inclusion in phase III to quantitatively predict chemical binding to the ER. Our data set for the relative binding affinities (RBAs) to the ER consists of 130 chemicals covering a wide range of structural diversity and a 6 orders of magnitude spread of RBAs. CoMFA and HQSAR models were constructed and compared for performance. The CoMFA model had a r2 = 0.91 and a q2LOO = 0.66. HQSAR showed reduced performance compared to CoMFA with r2 = 0.76 and q2LOO = 0.59. A number of parameters were examined to improve the CoMFA model. Of these, a phenol indicator increased the q2LOO to 0.71. When up to 50% of the chemicals were left out in the leave-N-out cross-validation, the q2 remained significant. Finally, the models were tested by using two test sets; the q2pred for these were 0.71 and 0.62, a significant result which demonstrates the utility of the CoMFA model for predicting the RBAs of chemicals not included in the training set. If used in conjunction with phases I and II, which reduced the size of the data set dramatically by eliminating most inactive chemicals, the current CoMFA model (phase III) can be used to predict the RBA of chemicals with sufficient accuracy and to provide quantitative information for priority setting.     

Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

流动注射微柱预分离富集荧光光度法测定肥料中的铈

用抗坏血酸将Ce(Ⅳ)还原为Ce(Ⅲ),以多聚磷酸钠作为增强剂,建立了铈的流动注射荧光分析法,考查了各种因素对测定Ce的影响.此方法线性范围为2.0×10-9～1.2×10-8 g·ml-1.采用流动注射微柱预分离富集测定了GBW07602标样和氨基酸微肥中的铈含量.测定结果与推荐值有良好的一致性.     

La-Ba系氧化物催化剂用于甲烷氧化偶联

以La_2O_3为基础,碱土金属作为第二组分的二元氧化物催化剂均具有较高的生成C_2活性,特别是La-Ba-O系催化剂具有优良的甲烷氧化偶联活性和稳定性,当La/Ba原子比为2.5时,C_2收率可达20.3％。第三组分的添加有助于提高C_2选择性,特别是添加碱金属,可以抑制完全氧化反应,并提高乙烯/乙烷比。在La:Ba:Na=2.5:1:0.1的催化剂上进行了500/小时的寿命实验,在整个反应期间,催化剂的活性和选择性相当稳定。X-射线物相分析表明,新鲜催化剂除有少量的碳酸钡外,主要是氧化镧和氧化钡的混合物。500小时后的物相基本上是氧化镧和碳酸钡。使用前后催化剂的比表面积及表面La和Ba的分布均无改变。较高的CH_4/O_3比对提高C_2选择性有利,当CH_4:O_2=4:1时,C_2选择性和收率分别为65.1％和19.1％。