Thermal decomposition of cobalt nitrato compounds: Preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra

The thermal decomposition of Co(NO₃)₂·6H₂O (1) as well as that one of NO[Co(NO₃)₃] (Co(NO₃)₂·N₂O₄) (2) was followed by thermogravimetric (TG) measurements, X-ray recording and Raman and IR spectra. The stepwise decomposition reactions of 1 and 2 leading to anhydrous cobalt(II)nitrate (3) were established. In N₂ atmosphere, cobalt oxides are finally formed whereas in H₂/N₂ (10% H₂) cobalt metal is produced. Rapid heating of cobalt(II)nitrate hexahydrate causes melting (formation of a hydrate melt) and therefore side reactions in the hydrate melt by incoupled reactions and evolution/evaporation of different species as, e.g., HNO₃, NO₂, etc. In case of larger amounts in dense packing in the sample container, the formation of oxo(hydoxo)nitrates is possible at higher temperature. For 2, its thermal decomposition to 3 was followed and its decomposition mechanism is proposed.     

N‐Silylaminotitanium Chlorides — Synthesis,Structures, Multinuclear Magnetic Resonance,and some Applications

N‐Silylaminotitanium trichlorides, Me₃S(R)N‐TiCl₃ ( 18 ) [R = ^tBu ( a ), SiMe₃ ( b ), 9‐borabicyclo[3.3.1]nonyl (9‐BBN)( c )], and (CH₂SiMe₂)₂N‐TiCl₃ ( 18d ) were obtained in high yield and high purity from the reaction of the respective bis(silylamino)plumbylene with an excess of titanium tetrachloride. The crystal structure of 18a was determined by X‐ray analysis. The reactions of the analogous stannylenes with an excess of TiCl₄ did not lead to 18 . N‐Lithio‐trimethylsilyl[9‐(9‐borabicyclo[3.3.1]nonyl)]amine ( 8 ) was prepared, structurally characterized and used for the synthesis of a new bis(amino)stannylene 10 and a plumbylene 11 . The compounds 18a—d served as ideal starting materials for the synthesis of bis(silylamino)titanium dichlorides, where the silylamino groups can be identical ( 19 ) or different ( 20 ). This was achieved either by the reaction of 18 again with bis(amino)plumbylenes or with lithium N‐silylamides. In contrast to the direct synthesis starting from titanium tetrachloride and two equivalents of the respective lithium amide, which in general affords 19 with identical amino groups only in low yield, the procedure starting from 18 is much more versatile and gave the pure compounds 19 or 20 in almost quantitative yield. Further treatment of the dichlorides 19 or 20 with lithium amides led to tris(amino)titanium chlorides 21 . The dichlorides 19 or 20 reacted with two equivalents of alkynyllithium reagents to give the first well characterized examples of di(alkyn‐1‐yl)bis(N‐silylamino)titanium compounds 22 — 27 . These compounds reacted with trialkylboranes (triethyl or tripropylborane) by 1, 1‐organoboration. In some cases, the extremely reactive reaction products could be identified as novel 1, 1‐bis(silylamino)titana‐2, 4‐cyclopentadienes 28 — 31 bearing a dialkylboryl group in 3‐position. In solution, the proposed structures of all products were deduced from a consistent set of data derived from multinuclear magnetic resonance spectroscopy (¹H, ¹¹B, ¹³C, ¹⁴N, ¹⁵N, ²⁹Si, ³⁵Cl NMR).     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Synthesis of 3-nitro- and 3-aminoquinoline-2,4-diones. An unexpected route to 3-hydroxyquinoline-2,4-diones

Nitration of 3-substituted-4-hydroxy-2(1H)-quinolones 1 with nitric acid leads either to 3-nitro- 2 or 3-hydroxyquinolinediones 3 , depending on the reaction conditions. 3-Substituted-3-hydroxyquinolinediones 3 are also obtained by oxidative hydroxylation with peracetic acid. Amination of 3-substituted-3-chloroquinolinediones 4 with ammonium hydroxide predominantly leads again to 3-substituted-3-hydroxyquinolinediones 3 , only in one case the 3-aminoquinolinedione 5 could be isolated. With morpholine or pyridine as amines the expected 3-aminoquinolinediones 6 and 7 were obtained.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.     

Nucleotide. X. Synthese und Eigenschaften von Dinucleosidmonophosphaten mit 2′-Desoxyadenosin und 1-(2′-Desoxy-β-D-ribofuranosyl)-lumazinen als Bausteine

Nucleotides. X. Synthesis and properties of dinucleoside monophosphates with 2′-deoxyadenosine and 1-(2′-deoxy-β-D -ribofuranosyl)-lumazines as building blocks The synthesis of various dinucleoside monophosphates 16--20 consisting of 2′-deoxyadenosine and 1-(2′-deoxy-β-D -ribofuranosyl)-lumazines via the triester approach is described. The fully protected phosphotriesters 6--10 as well as the partially deblocked intermediates 11--15 have also been isolated and characterized by physical means. Intramolecular interactions in 16--20 have been investigated by the determination of the hypochromicities and CD. spectra revealing a more or less distinct stacking effect in dependence of the 6,7-substituents in the lumazine moiety as well as the polarity of the internucleotidic linkage. Enzymatic degradations of the dinucleoside monophosphates with snake venom and spleen phosphodiesterase are depending strongly on various structural features indicating a much lower substrate specificity especially in presence of 6,7-diphenyl-lumazine as an aglycone with the latter enzyme.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

Periodic,multiplicative number-theoretical functions

D. Leitmann andD. Wolke [3] proved that multiplicative functions, which are restrictions of continuous, periodic functionsF: with irrational period, are constant equal to 0 or 1. In this note a simpler proof for this result is given.     

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

In this paper, by capturing the atomic information and reflecting the behaviour governed by the nonlinear potential function, an analytical molecular mechanics approach is proposed. A constitutive relation for single-walled carbon nanotubes (SWCNT’s) is established to describe the nonlinear stress-strain curve of SWCNT’s and to predict both the elastic properties and breaking strain of SWCNT’s during tensile deformation. An analysis based on the virtual internal bond (VIB) model proposed by P. Zhang et al. is also presented for comparison. The results indicate that the proposed molecular mechanics approach is indeed an acceptable analytical method for analyzing the mechanical behavior of SWCNT’s. The project supported by the National Natural Science Foundation of China (10121202, 90305015 and 10328203), the Key Grant Project of Chinese Ministry of Education (0306) and the Research Grants Council of the Hong Kong Special Administrative Region, China (HKU 7195/04E).