吹气孔直径对RH精炼过程钢液流动和混合特性的影响

针对90t RH精炼装置,以水力学模拟研究了吹气孔直径对真空循环精炼过程中钢液流动和混合特性的影响.模型和原型的相似比为15.模型吹气孔直径分别为0.8 mm和1.2 mm.结果表明,1.2 mm孔径下环流量和主要工艺参数间的关系为Ql Q80.26Du0.69Dd0.80;在给定的吹气量和插入管内径下,增大吹气孔直径并不显著改变精炼过程中钢液流动特征,环流量随吹气孔直径的增大而略有增大,其关系式为Ql=2.40Q 0.23gD0.72u D0.88d d0.13in;相应地,混合时间稍有缩短;0.8和1.2 mm孔径下,τm与搅拌能密度的关系分别为τm ε5和τm ε0.49.     

Chemical Speciation of Amphoteric Ions on Semi‐Dry Scrubber Residue and Bag‐House Ash from MSWI

Two series of size‐fractionated combusted residues, a bag‐house ash and a scrubber residue, from a municipal solid waste incinerator (MSWI) were prepared and extracted by means of sequential chemical extraction (SCE) procedures proposed by Tessier. Concentrations of water‐soluble phase, exchangeable phase, carbonated phase, Fe/Mn oxide phase, organic matter phase, and residual phase bound amphoteric metals (Pb and Zn) were obtained, and have been compared with those of single batch extraction of toxic characteristic leaching procedure (TCLP). In each size fraction of baghouse ash or scrubber residue, lead or zinc shows a common phenomena that the TCLP value is always lower than the content of the water‐soluble fraction. For lead, baghouse ash has a significant size‐dependent distribution on the water‐soluble phase to perform a size‐dependent test of lead in the TCLP test. The zinc TCLP data having less size dependence might be due to that neither the baghouse ash nor the scrubber residue has a size‐dependent distribution on the water‐soluble zinc phase.     

一类泛函微分方程周期解的存在性与应用

本文给出了一类滞后型泛函微分方程有一个周期解的四个充分性定理，其结果明显地优于著名的Ｙｏｓｈｉｚａｗａ周期解定理，最后给出了应用实例。     

An Interval-Parameter Fuzzy Approach for Multiobjective Linear Programming Under Uncertainty

An interval-parameter fuzzy linear programming method (IFMOLP) is proposed in this study for multiple objective decision-making under uncertainty. As a hybrid of interval-parameter and fuzzy methodologies, the IFMOLP incorporates interval-parameter linear programming and fuzzy multiobjective programming approaches to form an integrated optimization system. The method inherits advantages of interval-parameter programming, and allows uncertainties and decision-makers’ aspirations to be effectively communicated into its programming processes and resulting solutions. Membership functions for both objectives and constraints are formulated to reflect uncertainties in different system components and their interrelationships. An interactive solution procedure has been developed based on solution approaches of the interval-parameter and fuzzy programming techniques, plus necessary measures for handling the multiobjective feature. A didactic example is provided in the paper to illustrate the detailed solution process. Possibilities of further improvements by seeking Pareto optimum and incorporating flexible preference within constraints are also discussed.     

Irradiation-induced reduction and luminescence properties of Sm doped in BaBPO5

Usually, Sm²⁺ ions could be reduced by heating the materials in reducing atmospheres. Exposure to ionizing radiations is also known to cause Sm³⁺→Sm²⁺ conversion. In this work, BaBPO₅ doped with the samarium ion was prepared by high temperature solid-state reaction. Sm²⁺ ions were obtained by two different reduction methods, i.e., heating in H₂ reduced atmosphere and X-ray irradiation. The measurements of X-ray diffraction (XRD), and scanning electron microscope (SEM) were investigated. It is found that the conversion of Sm³⁺→Sm²⁺ is very efficient in BaBPO₅ hosts after X-ray irradiation. Sm²⁺ ions under these two reduction methods exhibit different characteristics that were studied by measurements of luminescence and decay. The results showed that the luminescence properties of Sm²⁺ ions in BaBPO₅ were highly dependent on the sample preparation conditions.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

玻色—爱因斯坦凝聚和兰姆位移

扼要地介绍了ＢＥＣ研究的近况和研究方向，同时报道了我们在ＢＥＣ的光散射和兰姆位移方面的研究工作     

三十烷醇在GA_3影响水稻幼苗生长和生理性状中的增效作用

微量三十烷醇（ＴＲＩＡ）与ＧＡ３配合使用，比ＧＡ３单独使用能明显地促进幼苗生长和增加幼苗干物质积累．同时还增强了ＧＡ３对幼叶中叶绿素含量、可溶性蛋白质含量、呼吸速率、细胞膜透性和过氧化物酶活性的影响．ＧＡ３＋ＴＲＩＡ与ＧＡ３处理相比，促进幼叶内源ＧＡ３水平提高，稳定保持内源ＺＴ于一定水平，ＴＲＩＡ在ＧＡ３低浓度时降低ＩＡＡ水平，在高浓度时则提高ＩＡＡ水平．作者认为ＴＲＩＡ可作为ＧＡ３处理时的增效剂．     

常压催化加氢合成邻氨基苯酚的研究

用硅溶胶改性的漆原镍催化剂，在常压液相催化条件下，氢化邻硝基苯酚制备邻氨基苯酚的反应过程，可分为诱导期、恒速吸氢阶段、吸氢衰减期３个反应阶段．恒速吸氢阶段的吸氢速率为５×１０２ｍｏｌ／（ｋｇ·ｍｉｎ）且与体系的温度无关，诱导期随温度的增加而变短，吸氢衰减期的长短随溶剂量的变化而变化．实验结果表明，邻氨基苯酚的收率在９５％左右．