A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

Rapid Fabrication of Hollow SiO2 Spheres with Novel Morphology

The hydrolysis of tetraethoxysilane (TEOS) occurred on the surface of poly(methyl methacrylate) (PMMA) microshperes immediately after these microshperes were prepared in TEOS. Micron-sized hollow SiO2 spheres were obtained by calcination of the coated PMMA microshperes. It was found that the final hollow spheres were constituted by small SiO2 particles.     

Chiral tris(oxazoline)/Cu(II) catalyzed coupling of terminal alkynes and nitrones

Novel chiral iPr-tris(oxazoline)/Cu(ClO4)2 x 6H2O catalyzed coupling of terminal acetylenes and nitrones to afford cis-disubstituted beta-lactams is described; the choice of base proves essential to both the diastereoselectivity and the enantioselectivity.     

A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.     

Na_（1－x）Zr（2－x）Nb_xP_3O_（12）系列化合物的水热晶化研究

采用水热晶化反应，制备出传统需要高温固相反应合成的掺杂ＮＡＳＩＣＯＮ化合物Ｎａ（１－ｘ）Ｚｒ（２－ｘ）ＮｂｘＰ３Ｏ１２（０＜ｘ＜１），并应用ＸＲＤ、ＩＲ方法对产物的晶体结构进行了研究，表明水热晶化产物是纯的物相并具有与ＮａＺｒ２Ｐ３Ｏ１２相同的结构．固体３１ＰＮＭＲ研究证实Ｎｂ（５＋）部分取代了Ｚｒ（４＋）所在位置，参与骨架的组成，并统计分布于结构中．水热晶化产物与固相反应产物具有相同的离子电导性能．     

5-氨基-1,3-二氢-1,3-二氧-异吲哚-2-丙酸类衍生物的合成及抗血管生成活性研究

根据RGD序列肽的构效关系, 设计并合成了一系列以5-氨基-1,3-二氢-1,3-二氧-异吲哚-2-丙酸为分子骨架的新化合物. 其中间体和目标物的化学结构经¹H NMR, MS和元素分析确证. 体外初步生物活性筛选结果表明, 目标物在10^－5 mol/L浓度下对bFGF诱导的鸡胚绒毛尿囊膜新生血管生成有显著抑制活性.     

Controlled growth of large-area, uniform, vertically aligned arrays of alpha-Fe2O3 nanobelts and nanowires

Vertically aligned iron oxide nanobelt and nanowire arrays have been synthesized on a large-area surface by direct thermal oxidation of iron substrates under the flow of O(2). The effects of reactive gas pressure, composition, and temperature have been systematically studied. It was found that nanobelts (width, tens of nanometers; thickness, a few nanometers) are produced in the low-temperature region (approximately 700 degrees C) whereas cylindrical nanowires tens of nanometers thick are formed at relatively higher temperatures (approximately 800 degrees C). Both nanobelts and nanowires are mostly bicrystallites with a length of tens of micrometers which grow uniquely along the [110] direction. The growth habits of the nanobelts and nanowires in the two temperature regions indicate the role of growth rate anisotropy and surface energy in dictating the ultimate nanomorphologies.     

贮氢合金材料电化学与表面性能的研究进展

贮氢合金材料电化学与表面性能的研究进展①杨勇李骏林祖赓（厦门大学化学系，固体表面物理化学国家重点实验室，厦门３６１００５）八十年代后期以来，人们对地球的环境保护提出了更高的要求，而便携式电器（如移动电话，摄像机与笔记本电脑等）对电池的需求也大量增加...     

Synthesis of an Anti-1,3-Diol Type Chiral Building Block

Duringthelastdecade,1,3-dioltypechiralbuildingbIocksofvariousconfigurationshavebeensynthesizedandappliedwidelyinthetotalsynthesisofnaturalpolyenemacrolideantibiotics1'2andla,25-dihydroxyvitaminD3analogues'.RecentlyWeigandandBrucker4synthesizedachiralbuildingblock(4R,6R)-2,2-dimethyl-5-tert-butyldip4-hydroxymethyl-l,3-dioxane1inlOsteps.Herein,wereportasyntheticrouteofnewbuildingblock(4S,6S)-2,2-dimethyl-5-tert-butyldip2,anenantiomerofl,startingfromreadilyavailableandinexpensiveD( )-xylose3i…     

取代二噁二唑硫醚及砜衍生物合成及抗菌活性

取代二噁二唑硫醚及砜衍生物合成及抗菌活性