Antibiotics Separation with MXene Membranes Based on Regularly Stacked High‐Aspect‐Ratio Nanosheets

The uncontrolled release of antibiotics and pharmaceuticals into the environment is a worldwide increasing problem. Thus, highly efficient treatment technologies for wastewater are urgently needed. In this work, seven kinds of typical antibiotics (including water and alcohol soluble ones) are successfully separated from the corresponding aqueous and ethanolic solutions using highly regular laminated membranes. Our membranes are assembled with 2–4 μm titanium carbide nanosheets. The solvent permeance through such titanium carbide membrane is one order of magnitude higher than that through most polymeric nanofiltration membranes with similar antibiotics rejection. This high flux is due to the regular two‐dimensional (2D) structure resulting from the large aspect ratio of titanium carbide nanosheets. Moreover, the electrostatic interaction between the surface terminations and the antibiotics also affects the rejection and enhances the antifouling property. Such 2D titanium carbide membranes further broaden the application scope of laminated materials for separation and purification of high value added drugs in academia and industry.     

Building an Air Stable and Lithium Deposition Regulable Garnet Interface from Moderate‐Temperature Conversion Chemistry

Garnet‐type electrolytes suffer from unstable chemistry against air exposure, which generates contaminants on electrolyte surface and accounts for poor interfacial contact with the Li metal. Thermal treatment of the garnet at >700 °C could remove the surface contaminants, yet it regenerates the contaminants in the air, and aggravates the Li dendrite issue as more electron‐conducting defective sites are exposed. In a departure from the removal approach, here we report a new surface chemistry that converts the contaminants into a fluorinated interface at moderate temperature <180 °C. The modified interface shows a high electron tunneling barrier and a low energy barrier for Li⁺ surface diffusion, so that it enables dendrite‐proof Li plating/stripping at a high critical current density of 1.4 mA cm^?2. Moreover, the modified interface exhibits high chemical and electrochemical stability against air exposure, which prevents regeneration of contaminants and keeps high critical current density of 1.1 mA cm^?2. The new chemistry presents a practical solution for realization of high‐energy solid‐state Li metal batteries.     

Highly Enantioselective Synthesis of Propargyl Amide with Vicinal Stereocenters through Ir‐Catalyzed Hydroalkynylation

Chiral propargyl amines are valuable synthetic intermediates for the preparation of biologically active compounds and functionalized amines. Catalytic methods to access propargyl amines containing vicinal stereocenters with high diastereoselectivity are particularly rare. We report an unprecedented strategy for the synthesis of enantioenriched propargyl amines with two stereogenic centres. An iridium complex, ligated by a phosphoramidite ligand, catalyzes the hydroalkynylation of β,β‐disubstituted enamides to afford propargyl amides in a highly regio‐, diastereo‐, and enantioselective fashion. Stereodivergent synthesis of all four possible stereoisomers was achieved using this strategy.     

New cadinane sesquiterpenoids from Mikania micrantha

Abstract

Chemical investigation of the aerial parts of Mikania micrantha led to the isolation of eight sesquiterpenoids and ten diterpenoids, including five cadinane sesquiterpenoids (1?5), three bisabolene sesquiterpenoids (6???8), nine ent-kaurane diterpenoids (9–17), and an abietane diterpenoid (18). Among them, 1???3 are new and feature a rare lactone or furan ring derived from C-6 isopropyl group side chain. Compound 18 was isolated from genus Mikania for the first time, and was also the first example of abietane-type diterpenoids from this plant. Their structures were elucidated on the basis of extensive spectroscopic analyses (1D and 2D NMR, HRESIMS, and ECD). All compounds were examined for their inhibitory effects on lipopolysaccharide (LPS)-induced nitric oxide (NO) production in RAW 264.7 macrophage cells, and compound 18 exhibited pronounced inhibition on NO production (IC₅₀ = 11.04?µM), being comparable to the positive control, quercetin (IC₅₀ = 11.15?µM).     

Precisely Tuning Photothermal and Photodynamic Effects of Polymeric Nanoparticles by Controlled Copolymerization

Cancer possesses normoxic and hypoxia microenvironments with different levels of oxygen, needing different efficacies of photothermal and photodynamic therapies. It is important to precisely tune the photothermal and photodynamic effects of phototherapy nano‐agents for efficient cancer treatment. Now, a series of copolymeric nanoparticles (PPy‐Te NPs) were synthesized in situ by controlled oxidative copolymerization with different ratios of pyrrole to tellurophene by FeCl₃. The photothermal and photodynamic effects of semiconducting nano‐agents under the first near‐infrared (NIR) irradiation were precisely and systematically tuned upon simply varying the molar ratio of the pyrrole to tellurophene. The PPy‐Te NPs were used for cancer treatment in mice, exhibiting excellent biocompatibility and therapeutic effect. This work presents a simple method to tune photothermal and photodynamic therapies effect in semiconducting nano‐agents for cancer treatment.     

Reversibly Switching the Charge State and Adsorption Location of A Single Potassium Atom on Ultrathin CuO Films

Potassium (K) cations are spontaneously formed upon thermal deposition of low‐coverage K onto an ultrathin CuO monolayer grown on Cu(110) and they were explored by low‐temperature scanning tunneling microscopy (STM) and X‐ray photoemission spectroscopy. The formed K cations are highly immobile and thermally stable. The local work function around an individual K cation decreases by 1.5±0.3 eV, and a charging zone underneath it is established within about 1.0 nm. The cationic and neutral states of the K atom are switchable upon application of an STM bias voltage pulse, which is simultaneously accompanied by an adsorption site relocation.     

Hydrochromic CsPbBr3 Nanocrystals for Anti‐Counterfeiting

Hydrochromic materials that can reversibly change color upon water treatment have attracted much attention owing to their potential applications in diverse fields. Herein, for the first time, we report that space‐confined CsPbBr₃ nanocrystals (NCs) are hydrochromic. When CsPbBr₃ NCs are loaded into a porous matrix, reversible transition between luminescent CsPbBr₃ and non‐luminescent CsPb₂Br₅ can be achieved upon the exposure/removal of water. The potential applications of hydrochromic CsPbBr₃ NCs in anti‐counterfeiting are demonstrated by using CsPbBr₃ NCs@mesoporous silica nanospheres (around 100 nm) as the starting material. Owing to the small particle size and negatively charged surface, the as‐prepared particles can be laser‐jet printed with high precision and high speed. We demonstrate the excellent stability over repeated transformation cycles without color fade. This new discovery may not only deepen the understanding of CsPbX₃, but also open a new way to design CsPbX₃ materials for new applications.     

Photoinduced Copper‐Catalyzed Asymmetric Decarboxylative Alkynylation with Terminal Alkynes

We describe a photoinduced copper‐catalyzed asymmetric radical decarboxylative alkynylation of bench‐stable N‐hydroxyphthalimide(NHP)‐type esters of racemic alkyl carboxylic acids with terminal alkynes, which provides a flexible platform for the construction of chiral C(sp³)?C(sp) bonds. Critical to the success of this process are not only the use of the copper catalyst as a dual photo‐ and cross‐coupling catalyst but also tuning of the NHP‐type esters to inhibit the facile homodimerization of the alkyl radical and terminal alkyne, respectively. Owing to the use of stable and easily available NHP‐type esters, the reaction features a broader substrate scope compared with reactions using the alkyl halide counterparts, covering (hetero)benzyl‐, allyl‐, and aminocarbonyl‐substituted carboxylic acid derivatives, and (hetero)aryl and alkyl as well as silyl alkynes, thus providing a vital complementary approach to the previously reported method.     

High‐Tc Enantiomeric Ferroelectrics Based on Homochiral Dabco‐derivatives (Dabco=1,4‐Diazabicyclo[2.2.2]octane)

1,4‐Diazabicyclo[2.2.2]octane (dabco) and its derivatives have been extensively utilized as building units of excellent molecular ferroelectrics for decades. However, the homochiral dabco‐based ferroelectric remains a blank. Herein, by adding a methyl (Me) group accompanied by the introduction of homochirality to the [H₂dabco]²⁺ in the non‐ferroelectric [H₂dabco][TFSA]₂ (TFSA=bis(trifluoromethylsulfonyl)ammonium), we successfully designed enantiomeric ferroelectrics [R and S‐2‐Me‐H₂dabco][TFSA]₂. The two enantiomers show two sequential phase transitions with transition temperature (T_c) as high as 405.8 K and 415.8 K, which is outstanding in both dabco‐based ferroelectrics and homochiral ferroelectrics. To our knowledge, [R and S‐2‐Me‐H₂dabco][TFSA]₂ are the first examples of dabco‐based homochiral ferroelectrics. This finding opens an avenue to construct dabco‐based homochiral ferroelectrics and will inspire the exploration of more eminent enantiomeric molecular ferroelectrics.