Synthesis of multi‐functionalized carbonyl compounds by palladium–catalysed γ‐substitution of MBH adducts with activated amides

Catalytic allylic γ‐substitution with Morita‐Baylis‐Hillman (MBH) adducts for creating a new family of unsymmetrical dicarbonyl compounds was presented in this work, in which a variety of allylated amide products were achieved in good yields and high regioselectivity with excellent linear‐to‐branched ratios. Especially, it was found that the Pd/HZNU‐Phos complex exhibited remarkably high activity (with a TON up to 16800) in this transformation between dicarbonyl amides and MBH adducts. In addition, the possibly multisite interaction between multifunctional Pd/HZNU‐Phos catalyst system and substrates might responsible for its exceptionally high efficiency in this reaction.     

SiO2纳米颗粒与聚氧乙烯对Pickering乳液的协同稳定作用简

研究了聚氧乙烯(PEO)与SiO2纳米颗粒对水/二甲苯体系Pickering乳液的协同稳定作用. 实验发现,PEO的存在减小了乳液液滴的平均直径,抑制了乳液的相反转,有效阻止了乳液的熟化,使乳液具有更好的稳定性. 进一步对纳米颗粒膜的流变性质进行研究,结果表明,PEO高分子促进了纳米颗粒形成更大尺寸的聚集结构,提高了其在界面上的吸附性,增强了颗粒膜的力学性能,在较小颗粒用量条件下使得Gibbs稳定性判据得到满足.     

Electrical actuation of dielectric droplets by negative liquid dielectrophoresis

This paper presents an electrical actuation scheme of dielectric droplet by negative liquid dielectrophoresis. A general model of lumped parameter electromechanics for evaluating the electromechanical force acting on the droplets is established. The model reveals the influence of actuation voltage, device geometry, and dielectric parameter on the actuation force for both conductive and dielectric medium. Using this model, we compare the actuation forces for four liquid combinations in the parallel-plate geometry and predict the low voltage actuation of dielectric droplets by negative dielectrophoresis. Parallel experimental results demonstrate such electric actuation of dielectric droplets, including droplet transport, splitting, merging, and dispending. All these dielectric droplet manipulations are achieved at voltages < 100 V_rms. The frequency dependence of droplet actuation velocity in aqueous solution is discussed and the existence of surfactant molecules is believed to play an important role by realigning with the AC electric field. Finally, we present coplanar manipulation of oil and water droplets and formation of oil-in-water emulsion droplet by applying the same low voltage.     

Electrochemical performance of lithium ion capacitors with different types of negative electrodes

The electrochemical properties of various commercial carbon materials (activated carbon (AC), graphite (GP) and hard carbon (HC)) have been investigated for use as negative electrode for lithium ion capacitors. The rate capabilities and cycle durabilities are tested up to 20 C and 1000 cycles using full cell configurations. It is found that the lithium ion could not efficiently intercalate into the activated carbon materials. The symmetrical AC/AC capacitor shows good cycle durabilities at 10 C with capacity of 17 mA h g^?1. The asymmetrical capacitors AC/GP and AC/HC with intercalated negative electrodes show higher capacities than that of AC/AC capacitor. Moreover, the AC/HC has better rate capabilities than AC/GP.     

Electrochemical performance of pre-lithiated graphite as negative electrode in lithium-ion capacitors

Electrochemical performance of the pre-lithiated graphite and the as-assembled lithium-ion capacitors (LICs) were investigated within the Li/graphite two-electrode cell and activated carbon (AC)/graphite two-electrode cell, respectively. The morphologies of the electrodes were characterized by scanning electron microscopy (SEM). The Li intercalation of Li/graphite two-electrode cell was performed using short circuiting and galvanostatic charging techniques. The Li pre-doping process was characterized by electrochemical impedance spectroscopy (EIS). The cycle performance of the LICs were investigated at the rates of 1–20 C between the cut-off voltage at 2 to 4 V. The results demonstrated that the LIC cells with 8 h pre-doping time have the best cycle performance at the high rate of 10 C. Li pre-doping methodology plays a crucial role in the electrochemical performance of the graphite electrode and the as-assembled LICs.     

均匀磁场下碳离子笔形束的剂量变化分析及位置修正方法

分析外加均匀磁场对于碳离子笔形束剂量分布的影响,并考虑修正这种影响,为磁共振成像引导碳离子放射治疗的临床应用提供指导。本文利用蒙特卡罗方法模拟计算了不同能量碳离子笔形束在不同强度磁场下的剂量分布情况,发现垂直于碳离子束入射方向的均匀磁场对于碳离子笔形束射程缩短的影响很小,磁场对碳离子束的主要影响是引起束流横向偏转,特别是碳离子束布拉格峰位置的横向侧移。横向侧移程度与碳离子束的能量和磁场强度相关,根据模拟结果,得到了一个计算碳离子束布拉格峰在磁场中相对横向偏转的方程,并提出一种校正外加磁场引起的碳离子束布拉格峰横移的角度修正方法。这些结果可用于指导磁共振图像引导碳离子放射治疗计划系统的研发。     

碳离子在不同材料叶片的多叶光栅上产生的次级粒子研究

在碳离子放射治疗中,碳离子束与治疗头设备和患者身体相互作用产生的次级粒子可以到达患者体内的许多区域,在产生的次级粒子中以中子和$\gamma $射线的产额为最大。在不影响束流配送功能的情况下,减少碳离子放疗中产生的次级中子和$\gamma $射线对于降低放疗后出现的正常组织并发症及二次肿瘤风险有着非常重要的意义。本文利用蒙特卡罗(Monte Carlo)方法模拟计算了被动式束流配送系统下,400 MeV/u碳离子束照射到由不同材料叶片构成的多叶光栅(MLC)形成典型的10 cm×10 cm方形射野时,在水模体中产生的次级中子和$\gamma $射线所沉积的剂量及空间分布等。模拟结果显示:碳离子束通过MLC形成射野后在水模体中产生的次级中子主要分布在水模体的入射端,次级$\gamma $射线较为均匀的分布在整个水模体内,且较多分布在具有展宽Bragg峰(SOBP)射野在水模体中贯穿时的坪区。对于MLC叶片材料的选择,则需根据实际情况对叶片厚度以及次级粒子当量剂量的要求来确定。本文通过模拟研究不同MLC叶片材料产生次级粒子的情况,为被动式束流配送系统中MLC叶片及其他元件的材料选择提供了科学依据。     

不同的烧结工艺对Sm-Co2∶17型高温磁体性能的影响

采用中频感应熔炼法制备了Sm( Co0.79 Fe0.09 Cuo.085 Zr0.032) 7.95合金,采用传统烧结工艺,在1200 ～1240℃烧结1h,1165 ～1190℃固溶处理3h,快速风冷淬火后在840 ℃保温12h,以0.4 ·min-1的冷速冷却至420℃,保温10h,最后随炉冷却.磁体经过加工后,采用不同的磁性测试手段对磁体进行测试.结果表明,磁体的剩磁随烧结温度的升高而增大,矫顽力最好的工艺为1230℃烧结1h,然后在1180℃固溶3h.将此工艺制备的磁体采用中国计量科学院NIM-500C超高温永磁测量仪测试,磁体在773 K时的最大磁能积为10.94 MGOe,高于已经报道的同Z值的2∶17型永磁体.磁体的磁滞回线通过振动样品磁强计( VSM)测得,室温下Br=10.5 kGs,Hcj=30.21 kOe,(BH)max=25.60MGOe; 773 K时磁体Br=7.45 kGs,Hcj=6.02 kOe,(BH) max=9.85 MGOe.剩磁温度系数α=-0.0624％·℃-1,矫顽力温度系数β=-0.169％·℃-1.     

手性胶束中的有机反应(Ⅴ)——手性胶束中查耳酮的不对称环氧化

本文报道查耳酮用H₂O₂在手性表面活性剂N,N-二甲基-N-十二烷基麻黄素澳化铵(1a)及N,N-二甲基-N-十六烷基麻黄素溴化铵(1b)形成的手性胶柬水溶液中的不对称环氧化反应,得到相应的手性α,β-环氧酮,对映体过量为5～8%.     

1,8-亚乙基萘在三氟化硼乙醚-聚乙二醇中的电化学聚合

在三氟化硼乙醚(BFEE)-聚乙二醇(分子量400,PEG400)混合电解质溶液中,1,8-亚乙基萘直接阳极氧化聚合可以获得自支撑聚(1,8-亚乙基萘)膜.单体在三氟化硼乙醚+10%PEG400中的起始氧化电位为0.95 Vversus SCE,远低于单体在0.1 mol.L-1四氟化硼四丁基胺-乙腈溶液中的起始氧化电位(1.38 VversusSCE).同时PEG400的加入可以有效改善单体在三氟化硼乙醚中的溶解性.UV-Vis,FTIR和1H-NMR确定了1,8-亚乙基萘在4,5位聚合,荧光光谱表明固态及可溶聚(1,8-亚乙基萘)膜是蓝色发光材料.