一种计算稀土材料陷阱深度的新方法

表征陷阱材料的主要物理量是陷阱深度, 准确计算出陷阱深度对于研究陷阱材料具有重要的意义. 从能带模型出发, 利用速率方程分析了整个热释光过程, 提出了一种计算稀土材料陷阱深度的新方法, 替代以往利用单分子或双分子近似计算陷阱深度的方法. 以SrAl2O4：Eu^2＋, Dy^3＋及Sr4Al14O25：Eu^2＋, Dy^3＋材料为研究对象, 计算了陷阱深度. 研究表明, 这种计算方法能更准确、真实地描述其物理过程.     

Fabrication of hexaphenylsilole nanowires and their morphology-tunable photoluminescence.

Immersion of nanoporous alumina membranes into saturated solutions of hexaphenylsilole with subsequent solvent evaporation affords aligned organic nanowires. The luminescent properties of the hexaphenylsilole nanowires can be manipulated by varying their morphologies, which were controlled by changing the channel sizes of the alumina templates.     

Recyclable,non-leaching antimicrobial magnetic nanoparticles

Recyclable antimicrobial magnetic nanoparticles, Fe₃O₄@P(St-co-AcQAC), were prepared through surfactantfree seeded emulsion polymerization involving a polymerizable, hydrophobic quaternary ammonium compound (QAC). These antimicrobial magnetic nanoparticles demonstrated excellent antimicrobial activities against both Grampositive and Gram-negative bacteria, and can be reused for multiple times.     

Electrochemical behavior of poly(ferrocenyldimethylsilane-b-dimethylsiloxane) films

The electrochemical behavior of poly(ferrocenyldimethylsilane-b-dimethylsiloxane) (PFDMS-b-PDMS) films deposited on a glassy carbon electrode was investigated by means of cyclic voltammetry (CV). The influences of the solvent, film thickness, temperature, and PDMS block length in PFDMS-b-PDMS on the electrode process were discussed. It was found that in 0.1 M aqueous LiClO(4) the electrochemical processes of the films on a glassy carbon electrode were complex and have a low rate of electron transport and mass diffusion. The kinetic parameters obtained indicated that the electrode process was controlled by both the electrode reaction and mass diffusion.     

具有C2对称轴的手性配体及其不对称催化反应

按配位原子的数目进行分类，综述了近年来研究较多的具有Ｃ２对称轴的手性配体及其相关的不对称催化反应，并对该类手性配体的设计做了分析和总结。参考文献７９篇。     

Use of Two-Dimensional Liquid Chromatography Combined with Diode-Array and Mass Spectrometric Detection for Analysis of Compounds in Flos Lonicera

Comprehensive two-dimensional liquid chromatographic separation by means of a combination of ion-exchange chromatography (IEC) and reversed-phase liquid chromatography (RPLC) has been realized and applied to the analysis of components of a traditional Chinese medicine Flos Lonicera. In the first dimension the components of a Flos Lonicera extract is separated on strong anion-exchange (SAX) column according to the charge-exchange properties of the components. In the second dimension the components are further fractionated by reversed-phase liquid chromatography (on ODS) on the basis of their hydrophobicity. The RPLC effluent is desalted and split and the components are identified on-line by use of both diode-array detection and mass spectrometry with atmospheric pressure chemical ionization (APCI–MS). In this way, the extract of Flos Lonicera can be rapidly separated, desalted, and analyzed, with determination of molecular weight. More than 58 components of an extract of Flos Lonicera were well resolved and six were tentatively identified from their UV and mass spectra.     

甲烷部分氧化制合成气 Ⅰ．甲烷在过渡金属上的活化

文中用同位素交换（Ｄ_２─ＣＨ_４）反应来测量四种过渡金属负载型催化剂对甲烷的活化能力，并与Ｓｖｅｎｓｓｏｎ等从头算的计算结果作了比较，表明最有效活化甲烷分子的Ｃ─Ｈ键的金属是铑（Ｒｈ）．文中还测定了在甲烷部分氧化制合成气反应中，四个不同催化剂的催化活性与选择性，并与它们对甲烷的活化能力进行对比，可以看出甲烷部分氧化反应中，反应活性高的催化剂有效地活化甲烷，断裂Ｃ─Ｈ键，而且氘代甲烷产物分布以形成ＣＤ_４产物为主要成份．     

粘质沙雷氏菌脂肪酶的固定化及催化拆分反式3-(4’-甲氧苯基)缩水甘油酸甲酯

 对粘质沙雷氏菌脂肪酶进行了固定化研究,确定硅藻土和环氧树脂Eupergit C是较好的固定化载体. 固定化后酶的热稳定性、 pH稳定性及储存稳定性均明显提高. 以Eupergit C共价固定的脂肪酶,其操作稳定性比硅藻土吸附酶好,重复使用10批次后,剩余酶活力还有50%左右,戊二醛交联对Eupergit C固定化酶稳定性的提高没有明显效果,而硅藻土吸附酶经戊二醛交联后稳定性有所提高,经5批次反应后剩余酶活力还有50%. 使用交联后的硅藻土固定化酶(1 g, 200 U), 在两相搅拌反应器(工作体积200 ml, 甲苯∶水体积比=1)中对地尔硫卓手性前体(±)-反式3-(4’-甲氧苯基)缩水甘油酸甲酯((±)-MPGM)(有机相浓度为0.5 mol/L)进行了催化拆分,经5批次反应后,共得纯(2R,3S)-(-)-MPGM 18.6 g, 产品光学纯度(对映体过量)>99%, 总收率为37.2%.     

甲醇与乙醇一步合成异丁醛用CuO-ZnO/Al2O3催化剂

在ＣｕＯ－ＺｎＯ／Ａｌ２Ｏ３催化剂上，甲醇与乙醇在常压和２１０￣３６０℃温度下一步反应合成异丁醛。利用正交设计方法，研究了ＣｕＯ－ＺｎＯ／Ａｌ２Ｏ３体系催化剂组成和制备条件等因素对催化剂催化性能的影响。结果表明，催化剂中ＣｕＯ含量对催化剂的催化活性影响最大，而ＺｎＯ含量则主要影响催化剂对异丁醛的选择性。催化剂制备条件，如沉淀温度、陈化时间等，也不同程度也影响催化剂的催化性能。ＸＲＤ和ＢＥＴ表征结果