液态结构与性质关系Ⅲ——剩余键理论模型

利用剩余键的思想, 通过数学推导, 建立定量描述金属熔体结构与黏度关系的物理模型, 提出黏度的微观结构变化特性为熔体剩余键结构尺寸d的演变; 应用建立的模型理论计算液相线以上一定温区镁熔体和铝熔体的运动黏度, 得到函数关系式分别为v_Mg=3.17×10^-7+3.04×10^-7· d和v_Al=1.65×10^-7+1.05×10^-7·d, 这与采用坩埚扭摆振动法的实验测量结果相符合. 该模型从化学结合键角度揭 示了金属熔体的结构微观不均匀性及其黏度的微观物理本质, 为金属熔体黏度的理论计算提供了一种新的途径. 这对于深入认识液态金属的微观结构及其与宏观物性之间的关系具有重要意义.     

石油污染地下水中铁氧化菌的筛选及其除铁效果

采用某油田污染场地石油降解菌——W2、W6、W9、W10,进行铁氧化菌的筛选。其中W9和W10对TFe去除率达90%。两株菌在24h内把Fe²⁺氧化成Fe²⁺,5d完成对TFe的去除;W9为革兰氏阴性杆菌,W10为革兰氏阳性芽孢杆菌。     

Insulator, semiclassical oscillations and quantum Hall liquids at low magnetic fields

Magneto-transport measurements are performed on two-dimensional GaAs electron systems to probe the quantum Hall (QH) effect at low magnetic fields. Oscillations following the Shubnikov-de Haas (SdH) formula are observed in the transition from the insulator to QH liquid when the observed almost temperature-independent Hall slope indicates insignificant interaction correction. Our study shows that the existence of SdH oscillations in such a transition can be understood based on the non-interacting model.     

Radiation characteristics and implosion dynamics of tungsten wire array Z-pinches on the YANG accelerator

We investigated the radiation characteristics and implosion dynamics of low-wire-number cylindrical tungsten wire array Z-pinches on the YANG accelerator with a peak current 0.8-1.1 MA and a rising time ～ 90 ns.The arrays are made up of(8-32)×5 μm wires 6/10 mm in diameter and 15 mm in height.The highest X-ray power obtained in the experiments was about 0.37 TW with the total radiation energy ～ 13 kJ and the energy conversion efficiency ～ 9%(24×5 μm wires,6 mm in diameter).Most of the X-ray emissions from tungsten Z-pinch plasmas were distributed in the spectral band of 100-600 eV,peaked at 250 and 375 eV.The dominant wavelengths of the wire ablation and the magneto-Rayleigh-Taylor instability were found and analyzed through measuring the time-gated self-emission and laser interferometric images.Through analyzing the implosion trajectories obtained by an optical streak camera,the run-in velocities of the Z-pinch plasmas at the end of the implosion phase were determined to be about(1.3-2.1)×10 7 cm/s.     

The effect of interfacial energy anisotropy on planar interface instability in a succinonitrile alloy under a small temperature gradient

The morphological stability of a planar interface with different crystallographic orientations is studied under a small positive temperature gradient using a transparent model alloy of succinonitrile.Novel experimental apparatus is constructed to provide a temperature gradient of about 0.37 K/mm.Under this small temperature gradient,the planar interface instability depends largely on the crystallographic orientation.It is shown experimentally that the effect of interfacial energy anisotropy on planar interface stability cannot be neglected even in a small temperature gradient system.Higher interfacial energy anisotropy leads the planar interface to become more unstable,which is different from the stabilizing effect of the interfacial energy on the planar interface.The experimental results are in agreement with previous theoretical calculations and phase field simulations.     

Lot‐sizing policies for deterioration items under two‐level trade credit with partial trade credit to credit‐risk retailer and limited storage capacity

The main purpose of this article is to investigate the optimal wholesaler's replenishment decisions for deterioration items under two levels of the trade credit policy and two storage facilities in order to reflect the supply chain management situation within the economic order quantity framework. In this study, each of the following assumptions have been made: (1) The own warehouse with limited capacity always is not sufficient to store the order quantity, so that a rented warehouse is needed to store the excess units over the capacity of the own warehouse; (2) The wholesaler always obtains the partial trade credit, which is independent of the order quantity offered by the supplier, but the wholesaler offers the full trade credit to the retailer; (3) The wholesaler must take a loan to pay his or her supplier the partial payment immediately when the order is received and then pay off the loan with the entire revenue. Under these three conditions, the wholesaler can obtain the least costs. Furthermore, this study models the wholesaler's optimal replenishment decisions under the aforementioned conditions in the supply chain management. Two theorems are developed to efficiently determine the optimal replenishment decisions for the wholesaler. Finally, numerical examples are given to illustrate the theorems that are proven in this study, and the sensitivity analysis with respect to the major parameters in this study is performed. Copyright © 2016 John Wiley & Sons, Ltd.     

Electrochemical properties of rutile TiO2 nanorods as anode material for lithium-ion batteries

In this paper, we synthesized rutile TiO₂ nanorods by hydrolysis of TiCl₄ ethanolic solution in water at 50?°C. Scanning electron microscopy and transmission electron microscopy images show that the as-prepared sample was consisted of nanoflowers of about 500?nm in sizes, and each petal of nanoflowers was assembled by several nanorods. We tested the electrochemical properties of the rutile TiO₂ nanorods as an anode material for lithium-ion batteries. The rutile TiO₂ nanorods exhibited a large initial discharge capacity of 223?mA?h?g^?1, and the stabilized capacity was as high as 170?mA?h?g^?1 after 100 cycles. These improved electrochemical performances may be attributed to the shorter diffusion length for both the electron and Li⁺, and the large electrode?Celectrolyte contact area offered by the nanorods with a large specific surface area, which facilitated the lithium ions insertion and extraction.     

一种结合几何相容性分析的谱匹配算法

为了可靠地实现点模式匹配,提出了一种基于谱图理论与几何相容性分析的点模式匹配算法。利用拉普拉斯矩阵的特征向量获得待匹配点集间谱匹配代价的表示;结合以邻近关系表示的几何相容性,定义了一种混合形式的匹配目标函数;给出了基于松弛迭代的求解算法。仿真数据和真实图像上的比较实验表明所给出的方法具有较好的精度与时间性能。     

基于折线采样的高分辨率成像系统设计

针对现有的提高线阵电荷耦合器件(CCD)成像系统的图像空间分辨率的方法存在的不足,提出了一种新的采样模式,并设计了一种高分辨率成像系统。该系统利用两个相同的线阵CCD相机进行特定的空间排列,即使得相机1和相机2的CCD阵列都倾斜θ来进行扫描取像,并利用图像校正和像素插值等图像重建方法,得到高分辨率的图像。实验结果表明,倾斜角取60°的情况下,相对于单个线阵相机在θ=0°的正常采样模式下得到的采样图像,图像的空间分辨率提高了1倍,且保持了成像的视野不变。本系统工程上实现简单,十分经济且便于维护,仅利用现有的成像装置即可获取更高分辨率的图像。