Polyaniline encapsulated silicon nanocomposite as high-performance anode materials for lithium ion batteries

Polyaniline encapsulated silicon (Si/PANI) nanocomposite as anode materials for high-capacity lithium ion batteries has been prepared by an in situ chemical polymerization of aniline monomer in the suspension of Si nanoparticles. The obtained Si/PANI nanocomposite demonstrates a reversible specific capacity of 840 mAh g^?1 after 100 cycles at a rate of 100 mA g^?1 and excellent cycling stability. The enhanced electrochemical performance can be due to that the polyaniline (PANI) matrix offers a continuous electrically conductive network as well as enhances the compatibility of electrode materials and electrolyte as a result of suppressing volume stress of Si during cycles and preventing the agglomeration of Si nanoparticles.     

Thermal hazard assessment and ranking for organic peroxides using quantitative structure–property relationship approaches

Journal of Thermal Analysis and Calorimetry - Chemical reactivity hazards of organic peroxides are major concerns of the chemical industry due to many serious incidents every year. Thermal hazard...     

Calibration of DC Potential Drop Method Considering Fatigue Load

Experimental Mechanics - The direct current potential drop (DCPD) method is an important method for monitoring crack initiation and propagation in specimens. During fatigue crack growth monitoring,...     

Meshfree simulations of large scale ductile fracture of stiffened ship hull plates during ship stranding

Meccanica - In this work, we have developed a systematic computational methodology to directly simulate the ductile fracture of ship hull structure during ship stranding based on the meshfree...     

柱面微通道板的制备及其性能研究

针对未来空间天文学应用的超分辨率光谱成像仪器的需求,对低噪声柱面微通道板（MCP）的制备方法及其性能进行了研究. 提出了一种将光学抛光与热成型相结合的新的柱面MCP制备方法,利用不含放射性元素的低噪声MCP玻璃,制备出曲率半径为400mm、尺寸为30mm′46mm、长径比为80:1、通道直径12.5mm、通道间距15mm的柱面MCP,并将其与感应电荷楔条形阳极（WSA）组成光子计数探测器,对其暗计数率、分辨率进行了检测,暗计数率约为0.1counts/cm2×s.     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

机械力固相法制备纳米α-FeOOH及其光催化性能研究

采用机械力固相法以FeCl3和Fe(NO3)3分别作为铁源.在铁源与碱1∶5摩尔比的条件下,先球磨3h,再经过60℃水浴陈化得到纳米针铁矿(α-FeOOH).用X-射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、比表面和孔隙度分析仪(BET)、紫外-可见分光光度计以及电化学工作站对其物相、微观形貌、比表面、光催化和光电化学性能进行表征.结果 表明:不同铁源的阴离子会诱导合成形貌和性能差异的纳米针铁矿,以FeCl3为原料合成的纳米α-FeOOH粒径较小、比表面积及孔容较大、对有机染料罗丹明B的降解率较以Fe(NO3)3为原料的α-FeOOH提高了48.7;.     

A New Cationic Fluorescent Probe for HSO3− Based on Bisulfite Induced Aggregation Self-Assembly

In comparison with the numerous studies that have centered on developing molecular frameworks for the functionalization of fluorescent materials, less research has addressed the influence of the side chains, despite such appendages contributing significantly to the properties and applications of fluorescent materials. In this work, a new series of cationic fluorescent probes with AIE characteristics have been developed, which exhibit unique sensitivity for charge-diffusion anions, namely HSO₃⁻, via the interactions of ions and the cooperation of the controllable hydrophobicity. The impact of the alkyl chain length attached at the cationic probes suggested that the fluorescent intensity and sensitivity of the probes could be partially enhanced by adjusting their aggregation tendency through the action of the hydrophobic effect under aqueous conditions. DLS and SEM images indicated that different particle sizes and new morphologies of the probes were formed in the anion-recognition-triggered self-assembly process, which could be attributed to the composite effect of electrostatic actions, Van der Waals forces and π-π stacking.     

Low‐Background,Highly Sensitive DNA Biosensor by Using an Electrically Neutral Cobalt(II) Complex as the Redox Hybridization Indicator

An electrically neutral cobalt complex, [Co(GA)₂(phen)] (GA=glycollic acid, phen=1,10‐phenathroline), was synthesized and its interactions with double‐stranded DNA (dsDNA) were studied by using electrochemical methods on a glassy carbon electrode (GCE). We found that [Co(GA)₂(phen)] could intercalate into the DNA duplex through the planar phen ligand with a high binding constant of 6.2(±0.2)×10⁵ M ^?1. Surface studies showed that the cobalt complex could electrochemically accumulate within the modified dsDNA layer, rather than within the single‐stranded DNA (ssDNA) layer. Based on this feature, the complex was applied as a redox‐active hybridization indicator to detect 18‐base oligonucleotides from the CaMV35S promoter gene. This biosensor presented a very low background signal during hybridization detection and could realize the detection over a wide kinetic range from 1.0×10^?14 M to 1.0×10^?8 M , with a low detection limit of 2.0 fM towards the target sequences. The hybridization selectivity experiments further revealed that the complementary sequence, the one‐base‐mismatched sequence, and the non‐complementary sequence could be well‐distinguished by the cobalt‐complex‐based biosensor.