An experimental and computational investigation on the fragmentation behavior of enaminones in electrospray ionization mass spectrometry

The dissociation pathways of protonated enaminones with different substituents were investigated by electrospray ionization tandem mass spectrometry (ESI‐MS/MS) in positive ion mode. In mass spectrometry of the enaminones, Ar? CO? CH?CH? N(CH₃)₂, the proton transfers from the thermodynamically favored site at the carbonyl oxygen to the dissociative protonation site at ipso‐position of the phenyl ring or the double bond carbon atom adjacent to the carbonyl leading to the loss of a benzene or elimination of C₄H₉N, respectively. And the hydrogen? deuterium (H/D) exchange between the added proton and the proton of the phenyl ring via a 1,4‐H shift followed by hydrogen ring‐walk was witnessed by the D‐labeling experiments. The elemental compositions of all the ions were confirmed by ultrahigh resolution Fourier transform ion cyclotron resonance tandem mass spectrometry (FTICR‐MS/MS). The enaminones studied here were para‐monosubstituted on the phenyl ring and the electron‐donating groups were in favor of losing the benzene, whereas the electron‐attracting groups strongly favored the competing proton transfer reaction leading to the loss of C₄H₉N to form a benzoyl cation, Ar‐CO⁺. The abundance ratios of the two competitive product ions were relatively well‐correlated with the σ_p⁺ substituent constants. The mechanisms of these reactions were further investigated by density functional theory (DFT) calculations. Copyright © 2010 John Wiley & Sons, Ltd.     

Micro fabrication of microlens arrays by micro dispensing

In this study, master of the microlens arrays is fabricated using micro dispensing technology, and then electroforming technology is employed to replicate the Ni mold insert of the microlens arrays. Finally, micro hot embossing is performed to replicate the molded microlens arrays from the Ni mold insert. The resin material is used as the dispensing material, which is dropped on a glass substrate. The resin is exposed to a 380 W halogen light. It becomes convex under surface tension on the glass substrate. A master for the microlens arrays is then obtained. A 150‐nm‐thick copper layer is sputtered on the master as an electrically conducting layer. The electroforming method replicates the Ni mold insert from the master of the microlens arrays. Finally, micro hot embossing is adopted to replicate the molded microlens arrays. The micro hot embossing experiment employs optical films of polymethylmethacrylate (PMMA) and polycarbonate (PC). The processing parameters of micro hot embossing are processing temperature, embossing pressure, embossing time, and de‐molding temperature. Taguchi's method is applied to optimize the processing parameters of micro hot embossing for molded microlens arrays. An optical microscope and a surface profiler are utilized to measure the surface profile of the master, the Ni mold insert and the molded microlens arrays. AFM is employed to measure the surface roughness of the master, the Ni mold insert and the molded microlens arrays. The sag height and focal length are determined to elucidate the optical characteristics of the molded microlens arrays. Copyright © 2009 John & Sons, Ltd.     

ChemInform Abstract: Electronic Structure,Elastic Anisotropy,Thermal Conductivity and Optical Properties of Calcium Apatite Ca5(PO4)3X (X: F,Cl or Br).

The structural properties, phase stability, electronic structure, elastic properties, and optical properties of Ca₅(PO₃)₄F (FA), Ca₅(PO₃)₄Cl (ClA) and Ca₅(PO₃)₄Br (BrA) are studied by DFT calculations with the generalized gradient approximation.     

Effect of Ar+, He+, and S+ Irradiation on n-InP Single Crystal

The irradiation effects of Ar⁺, He⁺, and S⁺ with energy from 10 eV to 180 eV on n-InP(100) surface are analyzed by X-ray photoelectron spectroscopy and low energy electron diffraction. After irradiation on the n-InP surface, damage on the surface, displacement of the Fermilevel and formation of sulfur species on S⁺ exposed surface are found and studied. Successive annealing is done to suppress the surface states introduced by S⁺ exposure. However, it is unsuccessful in removing the damage caused by noble ions. Besides, S⁺ ions can efficiently repair the Ar⁺ damaged surface, and finally form a fine 2×2 InP surface.     

An Efficient Synthesis of Pyrido[2,3‐d][6,5‐d]dipyrimidine and 5,5′‐Arylmethylenebis(2,6‐diaminopyrimidinone) Derivatives under Microwave Irradiation

A series of pyrido[2,3‐d][6,5‐d]dipyrimidine and 5,5′‐arylmethylenebis(2,6‐diaminopyrimidinone) derivatives have been synthesized through a rapid reaction of aromatic aldehydes with aminopyrimidines in acetic acid under microwave irradiation. This method has the advantages of simple operation, high yields, short reaction time, and easy work‐up.     

Graphene‐sensitized microporous membrane/solvent microextraction for the preconcentration of cinnamic acid derivatives in Rhizoma Typhonii

A novel graphene‐sensitized microporous membrane/solvent microextraction method named microporous membrane/graphene/solvent synergistic microextraction, coupled with high‐performance liquid chromatography and UV detection, was developed and introduced for the extraction and determination of three cinnamic acid derivatives in Rhizoma Typhonii. Several factors affecting performance were investigated and optimized, including the types of graphene and extraction solvent, concentration of graphene dispersed in octanol, sample phase pH, ionic strength, stirring rate, extraction time, extraction temperature, and sample volume. Under optimized conditions, the enrichment factors of cinnamic acid derivatives ranged from 75 to 269. Good linearities were obtained from 0.01 to 10 μg/mL for all analytes with regression coefficients between 0.9927 and 0.9994. The limits of quantification were <1 ng/mL, and satisfactory recoveries (99–104%) and precision (1.1–10.8%) were also achieved. The synergistic microextraction mechanism based on graphene sensitization was analyzed and described. The experimental results showed that the method was simple, sensitive, practical, and effective for the preconcentration and determination of cinnamic acid derivatives in Rhizoma Typhonii.     

Risk of Ocular Exposure to Biologically Effective UV Radiation in Different Geographical Directions

To quantify ocular exposure to solar ultraviolet radiation (UVR) and to assess the risk of eye damage in different geographical directions due to UVR exposure, we used a spectrometer and a manikin to measure horizontal ambient and ocular exposure UVR in different geographical directions at four different locations at the Northern Hemisphere. Describing the relationship of exposure to risk of eye damage requires the availability of UV hazard weighting function. So, we used the UV hazard weighting function (ICNIRP) proposed by International Commission on Non‐Ionizing Radiation Protection to determine the biologically effective UV irradiance (UVBE_eye) and then cumulative effective radiant exposure (H_eye) to shown the risk of eye. We found that in different geographical directions, distributions of ocular exposure to UVR were markedly different from those of horizontal ambient UVR. When the midday maximum SEA > 50°, eye received more UVR from the east and west directions during the morning and evening hours, respectively. However, when the midday maximum SEA < 50°, eye received more UVR from the south direction at noon. The results of this research indicate that the higher risk of eye caused by UVR varies according to the midday maximum SEA corresponding to different geographical direction.     

A Highly Selective and Sensitive Turn-On Fluorescent Chemosensor Based on Rhodamine 6G for Iron(III)

Recently, more and more rhodamine derivatives have been used as fluorophores to construct sensors due to their excellent spectroscopic properties. A rhodamine-based fluorescent and colorimetric Fe³⁺ chemosensor 3’,6’-bis(ethylamino)-2-acetoxyl-2’,7’-dimethyl-spiro[1H-isoindole-1,9’-[9H]xanthen]-3(2H)-one (RAE) was designed and synthesized. Upon the addition of Fe³⁺, the dramatic enhancement of both fluorescence and absorbance intensity, as well as the color change of the solution, could be observed. The detection limit of RAE for Fe³⁺ was around 7.98 ppb. Common coexistent metal ions showed little or no interference in the detection of Fe³⁺. Moreover, the addition of CN⁻ could quench the fluorescence of the acetonitrile solution of RAE and Fe³⁺, indicating the regeneration of the chemosensor RAE. The robust nature of the sensor was shown by the detection of Fe³⁺ even after repeated rounds of quenching. As iron is a ubiquitous metal in cells and plays vital roles in many biological processes, this chemosensor could be developed to have applications in biological studies.     

In situ sulfur isotopes (δS and δS) analyses in sulfides and elemental sulfur using high sensitivity cones combined with the addition of nitrogen by laser ablation MC-ICP-MS

The sulfur isotope is an important geochemical tracer in diverse fields of geosciences. In this study, the effects of three different cone combinations with the addition of N₂ on the performance of in situ S isotope analyses were investigated in detail. The signal intensities of S isotopes were improved by a factor of 2.3 and 3.6 using the X skimmer cone combined with the standard sample cone or the Jet sample cone, respectively, compared with the standard arrangement (H skimmer cone combined with the standard sample cone). This signal enhancement is important for the improvement of the precision and accuracy of in situ S isotope analysis at high spatial resolution. Different cone combinations have a significant effect on the mass bias and mass bias stability for S isotopes. Poor precisions of S isotope ratios were obtained using the Jet and X cones combination at their corresponding optimum makeup gas flow when using Ar plasma only. The addition of 4–8 ml min⁻¹ nitrogen to the central gas flow in laser ablation MC-ICP-MS was found to significantly enlarge the mass bias stability zone at their corresponding optimum makeup gas flow in these three different cone combinations. The polyatomic interferences of OO, SH, OOH were also significantly reduced, and the interference free plateaus of sulfur isotopes became broader and flatter in the nitrogen mode (N₂ = 4 ml min⁻¹). However, the signal intensity of S was not increased by the addition of nitrogen in this study. The laser fluence and ablation mode had significant effects on sulfur isotope fractionation during the analysis of sulfides and elemental sulfur by laser ablation MC-ICP-MS. The matrix effect among different sulfides and elemental sulfur was observed, but could be significantly reduced by line scan ablation in preference to single spot ablation under the optimized fluence. It is recommended that the d₉₀ values of the particles in pressed powder pellets for accurate and precise S isotope analysis should be less than 10 μm. Under the selected optimized analytical conditions, excellent agreements between the determined values and the reference values were achieved for the IAEA-S series standard reference materials and a set of six well-characterized, isotopic homogeneous sulfide standards (PPP-1, MoS₂, MASS-1, P-GBW07267, P-GBW07268, P-GBW07270), validating the capability of the developed method for providing high-quality in situ S isotope data in sulfides and elemental sulfur.     

Poly(phenylene oxide) modified cyanate resin for self‐healing

Self‐healing cyanate ester resins (CE) were developed by adding low molecular weight poly(phenylene oxide) (PPO) resin, yielding a high performance CE/PPO system via a low‐temperature process. The addition of PPO improved the flexural strength and fracture toughness of the CE matrix without sacrificing thermal properties. CE/PPO formulations with 5, 10, and 15 wt.% PPO showed 43%, 65%, and 105% increase in fracture toughness due to a combination of crack deflection, crack pinning, and matrix cavitation around second‐phase particles. When PPO was introduced into the CE, dielectric properties were either unchanged or declined. During thermal treatment to heal damaged CE, liquid PPO flowed into cracks, and during subsequent cooling, solidified to bond the crack surfaces. The self‐healing efficiency for CE with 15 wt.% PPO after heating to 220°C for 1 h exhibited a recovery of 73% in toughness and 81% in microtensile strength. Copyright © 2014 John Wiley & Sons, Ltd.