Crystal structure of the tetranickel complex with Ipropanethiolate

The title complex [Ni₄(SPrⁱ)₈] was confirmed by single crystal X-ray crystal diffraction analysis. The crystals are monoclinic, space group P2/n with a = 12.760(3), b = 10.059(2), c = 14.484(3) Å, α = 90, β = 93.70(3), γ = 90°, V = 1855.3(6) ų, Z = 4, F(000) = 880, D_c = 1.496 g/cm³, μ = 2.463 mm^?1, the final R = 0.0352 and wR = 0.0580. A total of 18,588 reflections were collected, of which 4404 were independent (R_int = 0.0631). In the crystal packing diagram, intermolecular C—H···Ni hydrogen bonds stabilize the solid state of the title complex.     

The DC Conductive Property of KTiOPO4 Crystal along its Z-Axis

The anomalous DC electrical conductive property of the KTP crystal along its z-axis is reported in this paper. The DC conductivity strongly depends on the measuring voltage. No Ohmic regime exists in the current-voltage relation. Ionic polarization occurs under high DC stresses. Electrode reactions were also observed. The phenomena are related to the easy movement of ions along the z-axis of the KTP crystal.     

大尺寸优质钒酸钇(YVO4)双折射晶体生长

采用硝酸脱水合成的原料,异型大口径铱坩埚,近平界面生长技术以及真空增氧退火工艺,成功地生长出直径为30～35mm,长度为50mm完整透明,无散射中心,无核芯的YVO4单晶.     

MMTN晶体与MMTWD晶体的晶格振动及热导率的拉曼光谱研究

采用拉曼光谱技术测量了MMTN(MnHg(SCN)4(C2H5NO)2)和MMTWD(MnHg (SCN)4(H2O)2(C3H7NO)2)两类金属有机配合物晶体的拉曼光谱,并对其晶格振动特征峰进行了指认.依据晶格动力学理论以及声子散射模型,推导了晶体热导率与声子寿命及拉曼谱线半峰宽的关系,计算了晶体的热导率,讨论了该类晶体激光损伤的物理机制.     

热电池MnO2/石墨烯正极制备及电性能研究

采用水热法合成了MnO2/石墨烯复合材料,通过扫描电子显微镜( SEM)分析了材料的表面形貌,通过X射线衍射(XRD)和X射线光电子能谱(XPS)表征了材料的晶相结构和组成,采用恒流放电的方式对LiSi/LiCl-KCl/( MnO2/G)单体电池进行了电性能的测试。测试结果表明反应体系中加入GO后获得的材料由大量的纳米花球式和纳米棒式结构无规则的交织排列在一起,α-MnO2纳米簇结构依附在石墨烯纳米片上;产物在2θ为22°~27°时出现了较宽的无序堆叠的石墨烯的衍射峰;Mn元素氧化后离子状态为Mn4+;LiSi/LiCl-KCl/( MnO2/G)单体电池有两个放电平台,分别为2.58 V、1.96 V,放电电压截止到1.0 V时,对应的放电比容量达到1150.2 mAh/g。     

Contraction of side-on nematic liquid crystalline elastomers micropillars: Influence of molecular parameters

We investigated the structure-property relationship of nematic liquid crystalline elastomer (LCE) actuators obtained from a series of nematic side-on monomers. The liquid crystalline acrylate monomers were designed and synthesized with different tail lengths. Combining a soft lithography technique with photo-polymerization/photo-crosslinking of aligned nematic liquid crystalline monomers and crosslinkers, nematic LCE micropillars were obtained, based on the new monomers. Through microscopic observation, influence of some structural parameters on the thermo-mechanical behavior of the micropillars was investigated. The thermo-mechanical behavior of the LCEs showed a close correlation with to the tail length of the monomer and the spacer length of the crosslinker.     

BaO–B2O3–SiO2–Al2O3 sealing glass for intermediate temperature solid oxide fuel cell

Glasses in the formulation close to BaSiO₃–BaB₂O₄ eutectic compound are developed for sealing of intermediate-temperature (500–650 °C) solid oxide fuel cell (IT-SOFC). Thermal and microstructural analyses of the glasses with 0–10 mol% Al₂O₃ are also conducted. Detailed crystallization kinetics and interfacial stability of the glass in contact with yttria-stabilized zirconia (YSZ) and samaria-doped ceria (SDC) are investigated and compared. The results show that the formulation, 47BaO–21B₂O₃–27SiO₂–5Al₂O₃ (G1A5), performs the best on glass forming ability (GFA) among all tested formulations, and shows matched thermal expansion and working temperature to CeO₂-based electrolytes of IT-SOFC. Two major crystalline phases that precipitate from G1A5 above 750 °C are platy hexacelsian and BaSiO₃ grains.     

平面硅异质结太阳电池的光吸收增强的研究

钙钛矿/硅叠层太阳电池可以充分利用太阳光谱,提高光电转换效率.平面硅异质结太阳电池可以作为叠层电池的底电池,其性能直接影响叠层电池的性能表现.采用传统反应热蒸发技术,在低温(170 ℃)条件下制备了掺锡氧化铟薄膜,并在170 ℃的氧气氛围下后退火处理,对ITO薄膜的特性进行了详细的表征和分析.结果表明:后退火工艺改善了ITO的结晶特性,使得材料的光学特性和电学特性得到明显提高,将其应用于平面硅异质结太阳电池,短路电流密度得到极大提高,尤其红外光响应改善明显.引入MgF2薄膜作为减反射层,进一步增强了电池的光响应,转换效率达到19.04;.     

微波水热法制备Al2O3包覆Al复合粉体的研究

用微波水热辅助沉淀法制得氧化铝前驱体/铝复合粉体,再经过1000℃煅烧2 h得到氧化铝/铝复合粉体,用XRD、SEM和EDS对粉体进行了表征.研究表明:相比普通水热法,微波水热法制备时间短,制得的前驱体水合氧化铝结晶度更好.当微波水热反应pH=11、反应时间为120 min、硝酸铝浓度为1 mol/L时,前驱体水合氧化铝的结晶度和煅烧后氧化铝对铝粉的包覆效果均达到最佳.     

减压扩散高阻密栅技术应用研究

本文对减压扩散机理及高阻密栅技术作了详细的分析,并就设备及工艺方面的关键技术进行了阐述,最后对减压扩散高方阻工艺及密栅匹配技术电池效率进行了对比分析,有以下结论:(1)减压扩散在工艺优化后,方阻均匀性得到大幅改善,达到3;以内.(2)减压扩散电池效率完全可达到常规产线的水平,且在高阻密栅方面更有优势,可有效提升太阳电池效率.