Parallel Plate Interferometer with a Reflecting Mirror for Measuring Angular Displacement

A parallel plate interferometer with a reflecting mirror for measuring angular displacement is proposed. A deflection angle of a beam caused by an angular displacement is amplified by use of a reflecting mirror to increase the optical path difference (OPD) in the plane-parallel plate, which provides high sensitivity of the phase measurement. Detection of light transmitted through the plane-parallel plate with a position sensitive detector (PSD) enables high accurate measurement of the initial angle of incidence to the plane-parallel plate with insensitivity to stray light. The improved parallel plate interferometer achieves a measurement repeatability of 10⁻⁸ rad.     

Hahn echo and criticality in spin-chain systems

We present a theory to establish a relation between Hahn spin-echo of a spin-1/2 particle and quantum phase transitions in many-body systems. The Hahn echo is calculated and discussed at zero as well as at finite temperatures. On the example of XY model, we show that the critical points of the chain are marked by the extremal values in the Hahn echo, and can influence the Hahn echo in finite temperatures. An explanation for the relation between the echo and criticality is also presented.     

基于液体基质材料的有机电致发光器件的制备及性能分析

利用液体基质材料9-(2-ethylhexyl)carbazole(EHCz)掺杂有机染料分子5,6,11,12-tetraphenyl-nathacene(rubrene)制备了具有液体发光层的有机电致发光器件,其结构为:ITO/PEDOT:PSS/EH Cz:rubrene/Cs2CO3/ITO,PEDOT:PSS...     

阴离子交换树脂分离甲苯萃取ICP-AES测定铋系超导粉中的痕量镍

建立了ICP-AES测定超导粉中痕量镍的新方法。优化了仪器工作参数,对超导前驱粉中痕量镍测定时的基体干扰及干扰消除方法进行了系统研究,结果表明:大量存在的基体元素产生严重基体效应,导致测定重现性及准确度变差,实验采用分离富集方法以提高测定结果的准确度和精密度。实验中首先用阴离子交换树脂,除去Bi3+及部分Pb2+,Sr2+,Ca2+,Cu2+等基体元素;在碱性条件下再通过甲苯萃取镍与丁二酮肟的络合物、稀盐酸反萃取富集镍;对分离富集条件进行了优化。对模拟标准样品进行测定,分析结果与理论值一致,相对标准偏差为1.9%,方法检出限为0.19μg.g-1。该方法已用于超导前驱粉样品中痕量镍的分析,结果令人满意。     

Characteristics of the crystalline and luminescence properties of a-plane GaN films grown on γ-LiAlO2 （302） substrates

A method of clarifying bioaerosol particles is proposed based on T-matrix. Size and shape characterizations are simultaneously acquired for individual bioaerosol particles by analyzing the spatial distribution of scattered light. The particle size can be determined according to the scattering intensity,while shape information can be obtained through asymmetry factor(AF) . The azimuthal distribution of the scattered light for spherical particles is symmetrical,whereas it is asymmetrical for non-spherical ones,and the asymmetry becomes intense with increasing asphericity. The calculated results denote that the 5 –10 scattering angle is an effective range to classify the bioaerosol particles that we are concerned of. The method is very useful in real-time environmental monitoring of particle sizes and shapes.     

Fixed-point algorithms for constrained ICA and their applications in fMRI data analysis

Constrained independent component analysis (CICA) eliminates the order ambiguity of standard ICA by incorporating prior information into the learning process to sort the components intrinsically. However, the original CICA (OCICA) and its variants depend on a learning rate, which is not easy to be tuned for various applications. To solve this problem, two learning-rate-free CICA algorithms were derived in this paper using the fixed-point learning concept. A complete stability analysis was provided for the proposed methods, which also made a correction to the stability analysis given to OCICA. Variations for adding constraints either to the components or to the associated time courses were derived too. Using synthetic data, the proposed methods yielded a better stability and a better source separation quality in terms of higher signal-to-noise-ratio and smaller performance index than OCICA. For the artificially generated brain activations, the new CICAs demonstrated a better sensitivity/specificity performance than standard univariate general linear model (GLM) and standard ICA. Original CICA showed a similar sensitivity/specificity gain but failed to converge for several times. Using functional magnetic resonance imaging (fMRI) data acquired with a well-characterized sensorimotor task, the proposed CICAs yielded better sensitivity than OCICA, standard ICA and GLM in all the target functional regions in terms of either higher t values or larger suprathreshold cluster extensions using the same significance threshold. In addition, they were more stable than OCICA and standard ICA for analyzing the sensorimotor fMRI data.     

混合界面对溶液制备的磷光OLED器件性能的影响

利用混蒸的方法、将空穴阻挡材料2,9-Dimethyl-4,7-diphenyl-1,10-phenanhroline及电子传输材料Tris(8-hydroxy-quinolinato)aluminium混合,在电子传输层及空穴阻挡层之间制备了薄层的混合界面.在相同驱动电压下,采用混合界面的器件比常规器件的电流密度和亮...     

Three-dimension direct writing TiO<Subscript>2</Subscript> crystalline patterns in Bi-free glass using femtosecond laser

Crystalline TiO₂ was induced three dimensionally inside Bi-free glass sample by an 800 nm, 250-kHz femtosecond laser irradiation. Micro-Raman spectra analysis indicated that the laser-induced crystals in the focal point of the laser beam were monophase TiO₂ rutile. Continuous crystalline lines were written through moving the focal point of the laser beam inside the glass. The results demonstrate that this technique is a convenient method to engrave three-dimensional patterns of crystals for fabricating integrated optical devices in transparent materials.     

A microfluidic chip integrated with a microoptical lens fabricated by femtosecond laser micromachining

We report on the integration of microlens and microfluidic channels in fused silica glass chip using femtosecond laser micromachining. The main process includes three procedures: (1) femtosecond laser scanning for forming a hemispherical surface and a Y-shaped channel in the fused silica glass; (2) chemical etching of the sample for removal of the modified areas; and (3) oxyhydrogen (OH) flame polish for smoothening the surface of the microlens. In addition, we demonstrate that the fabricated microlens exhibits good imaging performance with a 5× magnification, showing great potential in future lab-on-a-chip applications.     

LD-end-pumped 60 pm linewidth Tm:YLF laser

Narrow linewidth continuous-wave Tm:YLF laser at room temperature with a Volume Bragg grating and double Fabry-Perot etalons by using the end-pumping configuration was presented. The Tm:YLF laser operates at 1907.3 nm with FWHM of approximately 60 pm. We achieved the maximum output power of 1.92 W when the incident pump power of 13.9 W, corresponding to the optical-to-optical conversion efficiency of 13.8% and slope efficiency of 16.4%.