KGd(MoO4)2:Eu as a promising red phosphor for light-emitting diode application

A red phosphor KGd(MoO₄)₂:Eu³⁺ was prepared by solid-state reaction technique at high temperature. Its photoluminescent property was investigated and the optimum concentration of Eu³⁺ doped in the KGd(MoO₄)₂ is 25 mol%. Compared with Y₂O₂S:0.05Eu³⁺, the obtained KGd(MoO₄)₂:Eu³⁺ shows wider excitation band around 400 nm, higher intensity of Eu^{3+ 5}D₀–⁷F₂ emission upon excitation 393 nm, and the CIE chromaticity coordinates (x = 0.655, y = 0.345) are closer to the standard of National Television Standard Committee (NTSC). The optical properties of KGd(MoO₄)₂:Eu³⁺ suggest that it is an efficient red-emitting phosphor for light-emitting diode applications.     

Third-order aberration analysis of an off-axial optical system

The aberration theory applied to co-axial optical systems is extended to off-axial systems, for which third-order aberration coefficients are considered. The derived aberrations are analyzed using three-dimensional ray bundles, spot diagrams, and image charts, and classified in relation to the system symmetry. This theory is very useful for optical designers, allowing them to clarify the relationship between the structures of off-axial optical systems and the corresponding off-axial aberrations.     

Selective ablation of atherosclerotic lesions with less thermal damage by controlling the pulse structure of a quantum cascade laser in the 5.7-µm wavelength range

Cholesteryl esters are the main components of atherosclerotic plaques, and they have an absorption peak at the wavelength of 5.75 µm. To realize less-invasive ablation of the atherosclerotic plaques using a quasi-continuous wave (quasi-CW) quantum cascade laser (QCL), the thermal effects on normal vessels must be reduced. In this study, we attempted to reduce the thermal effects by controlling the pulse structure. The irradiation effects on rabbit atherosclerotic aortas using macro pulse irradiation (irradiation of pulses at intervals) and conventional quasi-CW irradiation were compared. The macro pulse width and the macro pulse interval were determined based on the thermal relaxation time of atherosclerotic and normal aortas in the oscillation wavelength of the QCL. The ablation depth increased and the coagulation width decreased using macro pulse irradiation. Moreover, difference in ablation depth between the atherosclerotic and normal rabbit aortas using macro pulse irradiation was confirmed. Therefore, the QCL in the 5.7-µm wavelength range with controlling the pulse structure was effective for less-invasive laser angioplasty.     

Freeform lenses for illumination of specific shapes in (<Emphasis Type="Italic">u</Emphasis>,<Emphasis Type="Italic">v</Emphasis>) coordinate system

Lens for rectangular illumination has been designed in (u,v) coordinate system already. Because of light source in (u,v) coordinate system can be divided into two identical parts, we have found that it is possible to design lenses for illumination of specific shapes. Specific shapes include triangles, as well as quadrangles which can be divided into two equal-area parts by one of the diagonals. We partition two equal-area parts into grids separately with equivalent luminous flux as well as light source, after that we construct freeform lenses by ray mapping method. Simulation results show that lenses for illumination of specific shapes are obtained with a Lambertian point source and favorable efficiency is over 0.86.     

Simple system for evaluating retardation of liquid crystal cells using grating type liquid crystal polarization splitters

We propose a unique optical system for measuring the retardation of birefringent films using a pair of liquid crystal (LC) gratings; that is, the examined birefringent films are inserted between two LC gratings. Because the LC grating functions as a polarization beam splitter for circularly polarized light, the proposed system is optically equivalent to the measurement system using a pair of two circular polarizers. First, the polarization splitting performance of the LC grating is discussed. It is found that a sufficiently high voltage (such that the retardation is less than a half wavelength) has to be applied for the almost pure circularly polarized diffracted light. Next, the measurement of the retardation of a homogeneous LC cell as an examined birefringent film was demonstrated using the proposed method. The proposed method is revealed to have the same measurement performance as that of the conventional method using a pair of linear polarizers and has an advantage that there is no need for the optic axis of the test birefringent specimen to be set at a specific angle.     

Optical aperture area determination for accurate illuminance and luminous efficacy measurements of LED lamps

The measurement uncertainty of illuminance and, consequently, luminous flux and luminous efficacy of LED lamps can be reduced with a recently introduced method based on the predictable quantum efficient detector (PQED). One of the most critical factors affecting the measurement uncertainty with the PQED method is the determination of the aperture area. This paper describes an upgrade to an optical method for direct determination of aperture area where superposition of equally spaced Gaussian laser beams is used to form a uniform irradiance distribution. In practice, this is accomplished by scanning the aperture in front of an intensity-stabilized laser beam. In the upgraded method, the aperture is attached to the PQED and the whole package is transversely scanned relative to the laser beam. This has the benefit of having identical geometry in the laser scanning of the aperture area and in the actual photometric measurement. Further, the aperture and detector assembly does not have to be dismantled for the aperture calibration. However, due to small acceptance angle of the PQED, differences between the diffraction effects of an overfilling plane wave and of a combination of Gaussian laser beams at the circular aperture need to be taken into account. A numerical calculation method for studying these effects is discussed in this paper. The calculation utilizes the Rayleigh–Sommerfeld diffraction integral, which is applied to the geometry of the PQED and the aperture. Calculation results for various aperture diameters and two different aperture-to-detector distances are presented.     

Growth and optical properties of Pr<Superscript>3+</Superscript>:KLu(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> laser crystal: a candidate for red emission laser

A Pr³⁺:KLu(WO₄)₂ crystal with dimension of 30 × 30 × 15 mm³ was grown in the K₂W₂O₇ flux. A slice was cut from the crystal, and the polarized absorption and fluorescence spectra were measured at room temperature. Based on the J-O theory, the oscillator intensity parameters Ω _t (t = 2, 4, 6), spontaneous emission probabilities and branch ratios were estimated and good results had been obtained. Furthermore, the crystal has a relatively large emission cross-section in the region of 615–630 nm with the highest value of 14.5 × 10^?20 cm², which indicates that the crystal is good for the application in red emission laser. The emission decay time for ¹D₂ and ³P₀ multiplets was discussed. By adapting the I-H model to fit the emission decay curves, the lifetime for ¹D₂ at 607 nm and ³P₀ at 615 nm are 19.72 μs and 8.95 μs, respectively. Then the corresponding fluorescence quantum efficiencies of the two multiplets reach 83.7 % and 87.9 %, respectively. All the studies illustrate that this crystal is potential in red emission laser application.     

Rician noise reduction in magnetic resonance images using adaptive non-local mean and guided image filtering

This paper proposes a Rician noise reduction method for magnetic resonance (MR) images. The proposed method is based on adaptive non-local mean and guided image filtering techniques. In the first phase, a guidance image is obtained from the noisy image through an adaptive non-local mean filter. Sobel operators are applied to compute the strength of edges which is further used to control the spread of the kernel in non-local mean filtering. In the second phase, the noisy and the guidance images are provided to the guided image filter as input to restore the noise-free image. The improved performance of the proposed method is investigated using the simulated and real data sets of MR images. Its performance is also compared with the previously proposed state-of-the art methods. Comparative analysis demonstrates the superiority of the proposed scheme over the existing approaches.