氢处理二氧化钛的光催化性能及电化学阻抗谱

通常可通过物理（浸渍法等）、化学方法（溶胶 -凝胶 ,电化学沉积法等）向光催化剂晶格中引入金属“小岛” ,以加速光生电子 -空穴的转移 ,提高改性后光催化剂的活性 [1].同时 ,运用物理和光电化学等手段研究半导体光催化剂的表面性质和光电化学性质 ,可以为评价这些改性光催化剂的活性和研究反应机理提供依据 [2,3].电化学阻抗谱 (EIS)方法是研究材料性质、化学 (特别是电化学 )过程和界面反应机理的有力工具 [4].本工作运用 EIS手段研究了纳米 TiO_2在氢气气氛下热处理后 TiO_2的阻抗谱特征同其光催化活性之间的关系 .1实验部分　　…     

离子注入Pt的玻碳电极上甲酸和甲醛的电氧化

制备了离子注入Pt的玻碳电极(Pt/GC),注入剂量为5×10¹⁷ion/cm²,此电极的表面组成和各元素的浓度-深度分布用AES测量,注入Pt的价态用XPS测量.在0.5mol/LHClO₄溶液中,用Pt/GC电极和纯Pt电极研究了甲酸的电氧化行为,并在五种不同种类的电解质溶液中研究了甲醛的电氧化行为.结果表明,Pt/GC电极对甲酸和甲醛的电催化性能按真实表面积计算优于纯Pt电极.这可能与离子注入Pt过程中形成纳米团簇有关.此外,在同一电极上,甲醛在不同种类的电解质溶液中产生不同的氧化电流.说明阴离子对甲醛的电氧化过程有明显影响     

壳聚糖及其衍生物与金属配位的研究进展

本文综述了壳聚糖、壳聚糖衍生物及其降解产物与金属配位的性能,形成某些配位化合物的条件、组成、结构及其表征,阐述了它们的应用。     

石英与水溶液作用的界面反应特征

矿物表面因存在有各种悬空键 ,而形成了表面活性官能团 ,称作“表面位”。对石英来说 ,表面氧离子可以与水中Ｈ+和ＯＨ- 离子反应 ,使表面产生荷电性。研究表明[1 ,2 ] ,石英对二价金属离子的吸附反应遵循Ｆｒｅｕｄｌｉｃｈ方程 ,本文在分析石英表面位及其质子化反应、表面位与重金属离子反应的基础上 ,进一步探讨石英与水溶液作用的界面反应特征及其影响因素。1　实验材料与方法石英粉末样品用王水煮洗 ,后用纯净水浸洗至无ＡｇＣｌ,过滤、1 1 0℃烘干、450℃煅烧 1 2ｈ。经ＮＯＶＡ 1 0 0 0ＶＥＲ3.7自动表面分析仪 (Ｎ2 ＢＥＴ法 )测定…     

基于普鲁士蓝(PB)膜修饰铂电极的葡萄糖传感器的研究

在制备PB膜修饰铂盘电极的基础上,利用修饰电极对过氧化氢的电催化还原特性,得到了性能优良的葡萄糖传感器。作者系统地考察了有关修饰膜制备和测试实验条件对传感器性能的影响,结果表明传感器的最佳工作电位是0．05V,测试溶液的最适PH值为6．5,在选定的工作条件下,传感器的检测灵敏度为80nA/mmol.L^-1,线性范围为0．1－5mmol.L^-1,响应时间为1．5min,寿命在1个月以上,表观米氏常数为21mmol.L^-1。本方法制得的传感器能有效消除抗坏血酸,尿酸的干扰,有望用于血液中葡萄糖的直接测定。     

甲醇自热重整制氢反应分析

甲醇自热重整制氢反应是车载燃烧电池氢源的理想方式,本文应用ZnO/Cr2O3催化剂MOR－67上的宏观动力学,模拟分析了甲醇自热重整制反应器,合适的反应器为绝热径向反应器,对于本反应器一维拟均相模拟结构表明;适宜的水／醇比为2（常压）或3（低压）;压力0．2MPa-0.3MPa。     

单N-乙酸取代O2N2大环配体及其稀土配合物的合成与表征

Aseries of new rare earth complexes LnL(NO₃)₂·2H₂O(Ln=La,Pr,Nd,Sm,Eu,Gd,Dy,Yb;L=1,2-diaza-3,4: 9,10-dibenzo-5,8-dioxyacyclopentadecane-N-acetic ion) were prepared. The complexes were characterized by elemental analysis, ICPmethod, IRspectra, 1H NMRand Molar conductance. It was found that the ether oxygen, carboxy oxygen and nitrogen atoms of the ligand are coordinated to the metal ion, as well as a free nitrate and coordianted nitrate ion in the complex.     

Design and Synthesis of Proteolysis Targeting Chimeras for Inducing BRD4 Protein Degradation

In this paper, we synthesized a series of proteolysis targeting chimeras(PROTACs) using VHL E3 ligase ligands for BRD4 protein degradation. One of the most promising compound 19g exhibited robust potency of BRD4 inhibition with IC₅₀ value of (18.6±1.3) nmol/L, respectively. Furthermore, compound 19g potently inhibited cell proliferation in BRD4-sensitive cell lines RS4;11 with IC₅₀ value of (34.2±4.3) nmol/L and capable of inducing degradation of BRD4 protein at 0.4—0.6 µmol/L in the RS4;11 leukemia cells. These data show that compound 19g is a highly potent and efficacious BRD4 degrader.     

Analysis of Protein Moiety of Polysaccharide Conjugates Water-extracted from Low Grade Green Tea

Tea polysaccharide conjugates(TPCs) were water-extracted and purified from low-grade green tea. Although TPC contains 1.97% covalent binding proteins, Coomassie brilliant blue G250 and R250 could not detect this protein. The "should-shape" absorption peak observed at 250-280 nm in the UV-Vis spectrum was caused by quinone compounds derived from polyphenol oxidation during TPC extraction. The UV-Vis spectrum could be used to detect the decolorizing degree of TPC. TPC aqueous solution merely presented the negative charge properties of its polysaccharides instead of the acid-base property of its protein section, and exhibited higher stability at pH greater than 5.0. No precipitation or haze occurred in three TPC/epigallocatechin gallate(EGCG) aqueous mixtures during 12 h storage. TPC had emulsifying activity, which indicated that its protein moiety formed hydrophobic groups. It is proposed that some of the physicochemical properties of the TPC protein moiety are shielded by its polysaccharide chain.     

Adsorption Activity and Molecular Dynamics Study on Anti-corrosion Mechanism of Q235 Steel

The correlation between inhibition efficiency and molecular structures of the inhibitor during hydrochloric acid corrosion of Q235 steel was studied by quantum chemical calculations and molecular dynamics(MD) simulation. The proton affinity(PA) calculations demonstrated that 2-(quinolin-2-yl)quinazolin-4(3H)-one inhibitor has the tendency to be protonated in hydrochloric acid, which was in good agreement with experimental observations. Besides, quantum chemical parameters revealed that the protonated corrosion inhibitor molecules were more easily adsorbed on Q235 steel surface and improved the corrosion resistance of steel. MD simulations were implemented to search for the adsorption behavior of this molecule on Fe (110) surface, which might be used as a convenient tool for estimating the interaction mechanism between inhibitor and iron surface.