Quantum Fluids of Self-Assembled Chains of Polar Molecules at Finite Temperature

The finite temperature properties of self-assembled dipole chains of polar molecules in strongly confined pancake traps are investigated. The single-chain vibrations at finite temperature, which become important for long chains in a strongly interacting regime, are found to lower the transition temperature and to shift the chain distribution by less than 10%. We also propose experimental parameters to observe such quantum phase transition.     

Asymptotic Analysis of Vertical Branch-Cut Integral of Shear Waves in a Fluid-Filled Borehole Utilizing the Steepest-Descent Method

We obtain an asymptotic solution to the vertical branch-cut integral of shear waves excited by an impulsive pressure point source in a fluid-filled borehole, by taking the effect of the infinite singularity of the Hankel functions related to shear waves in the integrand at the shear branch point into account and using the method of steepest-descent to expand the vertical branch-cut integral of shear waves. It is theoretically proven that the saddle point of the integrand is located at ks-i/z, where ks and z are the shear branch point and the offset. The continuous and smooth amplitude spectra and the resonant peaks of shear waves are numerically calculated from the asymptotic solution. These asymptotic results are generally in agreement with the numerical integral results. It is also found by the comparison and analysis of two results that the resonant factor and the effect of the normal and leaking mode poles around the shear branch point lead to the two-peak characteristics of the amplitude spectra of shear waves in the resonant peak zones from the numerical integral calculations.     

Guiding Neutral Atoms with Two Current-Carrying Wires and a Vertical Bias Field on the Atom Chip

We demonstrate the guiding of neutral atoms with two parallel microfabricated current-carrying wires on the atom chip and a vertical magnetic bias field. The atoms are guided along a magnetic field minimum parallel to the current-carrying wires and confined in the other two directions. We describe in detail how the precooled atoms are efficiently loaded into the two-wire guide. We present a detailed experimental study of the motional properties of the atoms in the guide and the relationship between the location of the guide and the vertical bias field. This two-wire guide with vertical bias field can be used to realize large area atom interferometer.     

Thermal analysis and expected performance of the low energy instrument on board the HXMT satellite

The Low Energy X-ray Instrument (LE) of the Hard X-ray Modulation Telescope (HXMT) uses the Swept Charge Device (SCD) to detect the X-rays in 1-15 keV. The performance of SCD is vulnerable to temperature. We analyzed the thermal condition of LE at different satellite working attitudes with the Finite Element Method (FEM). It is shown that the angle between the sunlight and the normal line of the barrier should be less them 26°, to keep the SCD detectors working in the required temperature range, i.e. -40 ℃ to -80 ℃. We find that the performance of LE is very stable in this temperature range, with a typical energy resolution of 160 eV at 5.9 keV.     

空间相机调焦机构的设计与分析

设计了一种用于空间相机的调焦机构,该机构采用步进电机带动的精密步进谐波传动。波发生器由椭圆凸轮与套在其上的柔性轴承组成,输出端连接滚珠丝杠将旋转运动转化为直线运动,带动调焦镜沿直线导轨往复运动,其中输出刚轮与绝对式编码器相连,检测调焦移动位移。该机构具有传动比大、精度高、结构紧凑、效率高、运转平稳等特点。针对该机构在空间相机的实际应用,推导出了调焦机构位移与焦面移动的位置关系,并对该调焦机构进行了误差分析,用闭环控制的方式对其精度进行了检测。试验数据表明,该调焦机构传动比为1：70,重复定位精度为2μm,满足空间相机使用要求。     

高功率980nm垂直腔面发射激光器的亮度特性

在循环水冷却(工作环境温度控制在15℃)和连续注入电流条件下,从垂直腔面发射激光器(VCSEL)亮度基本定义出发,实验测量了不同注入电流时口径为400μm的高功率980nm InGaAs/GaAs应变量子阱垂直腔面发射激光器(VCSEL)的亮度特性。结果表明:在注入电流4 A时,随着注入电流的增加,亮度也跟着增加;当注入电流4A时,尽管输出功率在增加,但是器件的光束质量变差,M2因子升高,表明此时影响器件亮度的主导因素是M2因子,所以亮度减小;在注入电流为4A,输出功率为1.2W时,亮度达到最大值2.43kW/cm2.sr,此时的光束质量最好,M2因子为207。最后,分析了影响高功率VCSEL器件亮度特性的主要因素,提出了提高器件亮度特性的解决方法。     

Cs2 CO3共蒸阴极对有机电致发光器件性能的影响

研究了碳酸铯(Cs2CO3)掺杂8-羟基喹啉铝(Alq3)作为电子注入层对有机电致发光器件性能的影响。结果表明,与常用的Cs2CO3超薄层作电子注入层相比,Cs2CO3∶Alq3共蒸阴极对器件效率和亮度有很大提高,器件电流效率从3.1 cd/A(Cs2CO31 nm/Al)提高到6.5 cd/A(Cs2CO33%∶Alq3/Al)。器件性能的提高归因于Cs2CO3∶Alq3共蒸阴极比单层Cs2CO3阴极具有更好的电子注入能力和电子传输性能。薄膜形貌表明,共蒸阴极能有效降低Alq3表面粗糙度,有助于提高器件发光性能及寿命。     

基于Matlab Simulink的物理实验——简谐振动仿真研究

以简谐振动和阻尼振动仿真为例介绍了用Simulink对物理实验进行仿真建模的方法。给出了位移、速度等振动曲线;可对振动过程中的动能、势能以及机械能进行监测。体现出Simulink仿真物理实验的优越性。     

激发波长和Eu2+的掺杂量对Sr4 Al14 O25:Eu2+,Dy3+发光性能的影响

采用溶胶-凝胶法在低温、还原气氛下制备了长余辉发光材料Sr4 Al14O25:Eu2+,Dy3+.用X射线粉末晶衍射对其进行了物相鉴定,表明在1200℃已经得到纯相的Sr4Al14O25产物.研究了铕和锶的比值、激发光波长对所制备的Sr4 Al14O25:Eu2+,Dy3+发光性能的影响并对其影响机理进行了探讨.样品的发光性能测试结果表明:采用溶胶-凝胶法制备长余辉发光材料Sr4Al14O25:Eu2+,Dy3+,其灼烧温度比高温固相法灼烧温度低;激发光谱向长波方向延伸时,在488 nm处发射峰增强,在410 nm处发射峰减弱;在一定范围内发光强度随着Eu2+量的增加而增强,Eu2+的最佳掺杂量为0.007,Eu2+的掺杂量超过0.007时会发生浓度猝灭.     

川芎挥发油化学成分GC/MS分析

使用水蒸气蒸馏法提取川芎中的挥发油,利用气相色谱-质谱联用技术对川芎化学成分进行分离鉴定,采用色谱峰面积归一化法确定各成分的相对含量。分析结果表明,共分离出53种组分,鉴定了其中的34个组分,占挥发油组分总量的64.42%。