信用担保风险的模糊综合评审研究

信用担保机构是连接银行和企业的桥梁，对于改善企业融资环境和拓展银行业务具有重要意义，信用担保风险的评审是担保机构能否生存及有效运行的关键。信用风险的评审机制主观性强，对担保项目进行客观，公正的评审比较困难。本采用模糊数学中的综合判别方法，全面考虑风险评审所涵盖的各种风险指标及其重要度，建立了定性分析与定量分析方法相结合的信用担保风险综合评审模型，为担保机构提供了一种相对科学、客观的评审方法。     

场协同理论在椭圆型流动中的数值验证

本文用数值模拟的方法，通过四个椭圆型流动传热的例子验证了场协同理论的正确性．结果表明，场协同理论不仅适合于抛物型流动，亦适合于复杂的有回流的椭圆型流动．     

As+注入硅的紫外-可见椭圆偏振光谱

本文采用椭圆偏振光谱法研究了剂量为1×10¹⁶—3×10¹²cm^-2的As⁺注入硅,及其在700℃退火后的光学性质。得出:当As⁺注入剂量增大到某一程度后,便呈非晶特性。低于临界剂量的样品,其n-λ,ε₂-λ关系曲线随剂量的增大而往下方移动,呈有规律变化;退火后,在大于4000?波段,n-λ与ε₂-λ曲线基本恢复到单晶硅状态。但在小于4000?的紫外区却未完全恢复,注入剂量越大,偏离单晶硅就越大。并指出,紫外光区是离子注入硅的信息敏感区;用有效质量模型计算出注入剂量与损伤度的关系。计算结果与实验符合得较好。 关键词：     

高阶Schr(O)dinger方程的加权估计

本文主要研究的是相函数为齐次椭圆多项式的自由高阶Schrodinger方程.通过相函数等值面的几何性质,得到了解算子的Strichartz加权估计和极大算子加权估计.     

抗生素调节的单种群chemostat模型研究

构建并分构了抗生素调节的单种群chemosta模型 ,得到了依赖于抗生素输入浓度的微生物种群绝灭和一致持续生存的充分条件 .     

一类无穷下三角矩阵的代数性质

修正了 [4,5]中的 Jabotinsky矩阵,得到并证明了一类无穷下三角矩阵T（f）的一些性质,最后,导出了一些与导数相关的反演关系和组合恒等式.     

北京谱仪Ⅲ电磁量能器触发系统的模拟研究

利用北京谱仪Ⅲ探测器模拟和触发系统模拟程序,研究了北京谱仪Ⅲ电磁量能器的触发方案.根据物理目标设计了中性事例触发,巴巴事例判选和带电事例触发的方案,优化了各触发条件的参数,并仔细研究了对本底的排斥能力.研究了一批典型的物理道,给出了它们的触发效率,同时给出了预期的本底触发事例率.     

Theoretical Study on the Reaction Mechanism between Dichlorocarbene and Armchair Single-walled Carbon Nanotubes

1 INTRODUCTION Carbon nanotubes have many potential applica- tions due to their unique structures and properties[1～4]. Physicists have been studying their electrical, me- chanical and other properties since their discove- ries[5, 6]. Recently, chemists are interested in carbon nanotubes because their properties can be altered by chemical functionalization[7～14], and these functiona- lized nanotubes can undergo further chemical trea- tment. So the potential application range of such na- …     

LOCAL WELL-POSEDNESS AND ILL-POSEDNESS ON THE EQUATION OF TYPE □u = uk((e)u)α

This paper undertakes a systematic treatment of the low regularity local wellposedness and ill-posedness theory in Hs andHs for semilinear wave equations with polynomial nonlinearity in u and (e)u. This ill-posed result concerns the focusing type equations with nonlinearity on u and (e)tu.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.