天然紫杉烷类化合物的核磁共振氢谱特征

在系统分析天然紫杉烷类化合物核磁共振氢谱的基础上，对具有不同骨架类型的天然紫杉烷类二萜化合物的核磁共振氢谱的特征进行了总结, 提供了部分不同类型的紫杉烷类化合物的核磁共振氢谱图. 这些¹H NMR特征对于紫杉烷类化合物的结构确定非常有益.     

Spin Transport in a Rashba Ring-Quantum Dot System Pumped by Microwave Fields

We report a theoretical study on producing electrically spin-polarized current in the Rashba ring with parallel double dots embedded, which are subject to two time-dependent microwave fields. By means of the Keldysh Green's function method, we present an analytic result of the pumped current at adiabatic limit and demonstrate that the interplay between the quantum pumping effectand spin-dependent quantum interference can lead to an arbitrarily controllable spin-polarized current in the device. The magnitude and direction of the charge and spin current can be effectively modulated by system parameters such as the pumping phase difference, Rashba precession phase, and the dynamic phase difference of electron traveling in two arms of ring; moreover, thespin-polarization degree of the charge current can also be tuned in the range [-∞, +∞]. Our findings may shed light on the all-electric way to produce the controllable spin-polarized charge current in the field of spintronics.     

快速匹配算法在药筒模块检测中的应用

为了能够快速、准确判断药筒模块是否合格,实现检测的自动化,针对药筒模块中可燃性紧塞盖图像的特点和检测要求,在研究经典相关系数匹配算法基础上,采用了一种快速图像匹配算法,即通过减少相关系数计算量和模板搜索范围,在保证匹配准确度的前提下来提高图像匹配速度。实验和现场测试表明,使用该方法,匹配速度提高了近67%,实现了图像的快速匹配,软件误判率1%,满足实际生产要求。     

多功能干涉测量实验装置

基于迈克耳孙干涉仪,利用自动图像处理技术及零件移动距离光学测量技术,构建多功能干涉测量实验装置,该装置能够测量光源波长、光学球面半径、检测光学面形.     

达旦黄-曲通X-100体系共振光散射法测定蛋白质

基于在Triton X-100存在下,蛋白质与达旦黄作用使得体系的共振光散射增强,在λ＝492 nm处光散射强度最大,增强作用的强弱与蛋白质的含量成正比,据此建立了共振光散射测定蛋白质的新方法。此方法对牛血清白蛋白的检出限达到17.7 ng·mL-1,线性范围为0.03～0.9 μg·mL-1,用于合成样与人血清样品的分析,取得了令人满意的结果。同时也研究了人血清白蛋白、鸡蛋白蛋白、溶菌酶、胰蛋白酶与达旦黄的作用。     

一种电流引线的热力学计算方法

从超导磁体气冷电流引线的热平衡方程出发,对电流引线进行分段,提出了一种较为精确计算电流引线长横比及由电流引线末端流入低温容器热量的计算方法;电流引线中氦气流阻是设计电流引线时一个很重要的参数,由于电流引线片形状很复杂,计算其中氦气流阻比较好的方法是采用CFD软件Fluent。氦气模型单元数很庞大,因此对氦气模型进行了简化和分段,相邻两段模型间采用流量和压力边界条件进行耦合。     

A review of the metal stud stiffness on the sound insulation of gypsum-board partitions

For the sound insulation of a double-panel partition,the stud between two leaves creates a vibration transmission path,which can often be more critical and more important in the mid-frequency range than the airborne path through the cavity.Owing to the fact that partitions with light-weight steel studs are commonly used in building construction,studies on the sound insulation effect of such studs have been conducted.Especially,a model,initiated by Gu and Wang(1983),has been widely studied during the past decades.In the model,the steel stud is considered as an elastic spring with its cross-section stiffness in the sound insulation index prediction of such a partition.Experimental results of different stud profiles have been reported from different testing laboratories and more information has been gained to understand the stiffness effect of the stud on the sound insulation of the double-leaf partitions.In this paper,the authors have given this subject a thorough review and have concluded that a critical problem needs further investigation on the determination of the stiffness of the connecting elements in the double-leaf partitions.     

缩合法合成磁性荧光高分子CdTe@Fe_3O_4/P(NIPAM-co-AA)复合微球及其表征

具有超顺磁性和荧光特性的CdTe@Fe_3O_4/P(NIPAM-co-AA)多功能复合微球是以P(NIPAMco-AA)为模板制备而成.首先,采用溶胀法使模板微球带有磁性;其次,辅助TEOS和APTES两种化学试剂实现对Fe_3O_4/P(NIPAM-co-AA)微球表面的氨基功能化;最后,携带氨基的磁性微球与巯基乙酸修饰的CdTe量子点通过酰胺缩合反应,将量子点键合到磁性微球表面上,最终获得单分散的磁性荧光高分子复合微球.分别采用扫描电子显微镜、透射电子显微镜、倒置荧光显微成像系统、荧光分光光度计以及振动样品磁强计等方法对所获复合材料的结构与性能进行了表征.结果表明:复合微球单分散性良好,平均粒径约为30μm,饱和磁化强度可达5.4emu/g,具有良好的超顺磁性和较高的荧光发光效率.该材料将磁性、荧光结合到微米级高分子共聚物上,不仅解决了纳米粒子分离和处理的困难,而且奠定了多功能材料在生物标记、荧光成像等诸多领域潜在的应用基础.     

The application of laser reflective tomography in near-field measurements of ultrasonic transducers

With Laser Reflective Tomography（LRT）,the near fields of ultrasonic transducers were measured and analyzed.The principle of LRT measurement of ultrasonic field distribution was introduced and an experimental system was set up.Acoustic pressure of a multiple element piston transducer was measured by using of a laser vibrometer.Its distribution in amplitude and phase was obtained.The acoustic pressure in the same region was measured with a needle hydrophone to validate the LRT method.Furthermore,through reconstruction of acoustic fields,it indicated that LRT method is suitable for predicting the distribution on transducers＇surface and conditions of active elements.     

DFT Investigations of Aun Nano-Clusters Supported on TiO2 Nanotubes: Structures and Electronic Properties

TiO₂ nanotubes (TiO₂NTs) are beneficial for photogenerated electron separation in photocatalysis. In order to improve the utilization rate of TiO₂NTs in the visible light region, an effective method is to use Au_n cluster deposition-modified TiO₂NTs. It is of great significance to investigate the mechanism of Au_n clusters supported on TiO₂NTs to strengthen its visible-light response. In this work, the structures, electronic properties, Mulliken atomic charge, density of states, band structure, and deformation density of Au_n (n = 1, 8, 13) clusters supported on TiO₂NTs were investigated by DMOL3. Based on published research results, the most stable adsorption configurations of Au_n (n = 1, 8, 13) clusters supported with TiO₂NTs were obtained. The adsorption energy increased as the number of Au adatoms increased linearly. The Au_n clusters supported on TiO₂NTs carry a negative charge. The band gaps of the three most stable structures of each adsorption system decreased compared to TiO₂NTs; the valence top and the conduction bottom of the Fermi level come mainly from the contribution of 5d and 6s-Au. The electronic properties of the 5d and 6s impurity orbitals cause valence widening and band gap narrowing.