选择性氧化含氰基的对硝基苯硫醚

选择性氧化含氰基的对硝基苯硫醚岳国仁，王建华，张正（南京大学化学系南京２１０００８）关键词含氰基硫醚，选择性氧化，四水合过硼酸钠据报道［１］对硝基苯磺酰基乙腈的合成，反应时间长，可采用四水合过硼酸钠（ＮａＢＯ３·４Ｈ２Ｏ）作为氧化剂，受到重视［２，３...     

Activation of Carbon Dioxide and Synthesis of Propylene Carbonate

Cycloaddition of carbon dioxdie and propylene oxide to propylene carbonate catalyzed by tetra-tert-butyl metal phthalocyanine in the presence of tributylamine(TBA) shows higher yield than catalyzed by unsubstituted metal phthalocyanine.Comparing different catalysts of diverse metals,(t-Bu)4PcMg is more active than (t-Bu)PcFe ,But(t-Bu)4PcCo and (t-Bu)4PcNi only have low catalytic activities towards the reaction.Moreover,the yield will increase as the temperature increases.     

Theoretical studies of mechanisms of cycloaddition reaction between difluoromethylene carbene and acetone

Mechanisms of the cycloaddition reaction between singlet difluoromethylene carbene and acetone have been investigated with the second‐order Møller–Plesset (MP2)/6‐31G* method, including geometry optimization and vibrational analysis. Energies for the involved stationary points on the potential energy surface (PES) are corrected by zero‐point energy (ZPE) and CCSD(T)/6‐31G* single‐point calculations. From the PES obtained with the CCSD(T)//MP2/6‐31G* method for the cycloaddition reaction between singlet difluoromethylene carbene and acetone, it can be predicted that path B of reactions 2 and 3 should be two competitive leading channels of the cycloaddition reaction between difluoromethylene carbene and acetone. The former consists of two steps: (i) the two reactants first form a four‐membered ring intermediate, INT2, which is a barrier‐free exothermic reaction of 97.8 kJ/mol; (ii) the intermediate INT2 isomerizes to a four‐membered product P_2b via a transition state TS2b with an energy barrier of 24.9 kJ/mol, which results from the methyl group transfer. The latter proceeds in three steps: (i) the two reactants first form an intermediate, INT1c, through a barrier‐free exothermic reaction of 199.4 kJ/mol; (ii) the intermediate INT1c further reacts with acetone to form a polycyclic intermediate, INT3, which is also a barrier‐free exothermic reaction of 27.4 kJ/mol; and (iii) INT3 isomerizes to a polycyclic product P₃ via a transition state TS3 with an energy barrier of 25.8 kJ/mol. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Zig‐Zag Diphosphene Oligomers Linked by Silver(I) Cation

The coordination of silver cation to diphosphene Mes*P=PMes* ( 1 , Mes* = ^tBu₃C₆H₂) was investigated in detail. The reaction of 1 with Ag[Al(OR_F)₄] (OR_F = OC(CF₃)₃) in the ratios of 2 : 1, 3 : 2 and 1 : 2 led to the formation of the first cationic silver linked diphosphene complexes 2 — 4 . Complexes 2 and 3 contain two and three diphosphene molecules linked by the linear Ag(I) cation, respectively, and they feature unusual zig‐zag topologies. Complex 4 is a dinuclear silver complex, and each Ag(I) center features a tetrahedral geometry, coordinated by one phosphorus atom of diphosphene 1 and three chloro atoms of two CH₂Cl₂ molecules.     

吡嗪衍生物在石墨表面上的自组装单层膜结构

利用扫描隧道显微镜研究了荧光液晶分子2, 5-二-[2-(3, 4-二-十二烷氧基-苯基)-乙烯基]-3, 6-二甲基吡嗪(BPDP12)在石墨表面上自组装单层膜的结构. 实验结果表明, 该化合物在石墨表面形成两种自组装结构：一种是稳定的, 分子的共轭中心相互平行, 烷基链相互交错的密排结构；另一种是不稳定的, 分子的共轭中心彼此为烷基链所分隔的非密排结构. 分子之间较强的π-π作用和分子烷基链之间的范德华作用力对分子组装的取向形成竞争, 是产生两种不同组装结构的根本原因.     

CuO／活性炭和Fe2O3／活性炭催化还原NO

ＣｕＯ／活性炭和Ｆｅ_２Ｏ_３／活性炭催化还原ＮＯ高志明，赵震，杨向光，吴越（中国科学院长春应用化学研究所长春１３００２２）关键词活性炭，还原，ＮＯ，氧化铜，氧化铁目前，对固定源的ＮＯ处理是采用Ｖ２Ｏ５／ＴｉＯ２作催化剂，ＮＨ３作还原剂的选择催化还原方...     

新疆阿克提什坎金矿床稀土元素地球化学研究

研究了新疆阿尔泰特地区阿克提什坎金矿床的稀土元素及矿区二长花岗岩平衡的热液中稀土元素的组成特征及配分模型，并应用Grang等位线方法讨论了热液蚀变作用过程中稀土元素的行为。研究表明，在热液蚀变作用过程中，稀土元素保持惰性，成矿热液与岩浆热液关系不大，成矿物质主要来源于围岩。     

Regioselectivity in Lewis acids catalyzed X-H (O, S, N) insertions of methyl styryldiazoacetate with benzyl alcohol, benzyl thiol, and aniline

Different from Rh(II) catalysts, X-H (X = O, S, N) insertion of methyl styryldiazoacetate catalyzed by Lewis acids including Cu(I), Cu(II) and Ag(I) complexes occurred at γ-position preferably. Only (E)-isomer was observed in the reactions. This method provides an alternative for the synthesis of γ-hydroxyl or γ-amino acid derivatives.     

Design and Theoretical Study of Nickel Catalysts for Syndiotactic Polyolefins

A nickel catalyst was nodeled with ligand L^2,[NH=CH-CH=CH-0]^-,which should have potential use as a syndiotactic plyolefin catalyst,and the reaction mechanism was studied by theoretical calculations using the density functinal method at the B3LYP/LANL2MB level.The mechanism involves the formation of the intermediate [NiL^2Me]^ ,in which the metal occupies a T-shaped geometry.This intermediate has two possible structures with the methyl group trans either to the oxygen or to the nitrogen atom of L^2.The results show that both structures can lead to the desired product via similar reaction paths,A and B.Thus,the polymerization could be considered as taking place either with the alkyl group occupying the position trans to the Ni-0 or trans to the Ni-N bond in the catalyst.The polymerization process thus favors the catalysis of syndiotactic polyolefins.The syndiotactic synthesis effects could also be enhanced by varations in the ligand substituents.From energy considerations,we can conclude that it is more favorable for the methyl ttrans-O position to form a complex than to occupy the trans-N position.From bond length considerations,it is also more favoured for ethene to occupy the trans-O position than to occupy the trans-N position.     

Metal-benzene and metal-CO bond energies in neutral and ionic C6H6Cr(CO)3 studied by threshold photoelectron-photoion coincidence spectroscopy and density functional theory

photoelectron-photoion coincidence spectroscopy and density functional theory calculations have been used to investigate the dissociation kinetics of the benzene chromium tricarbonyl ion, BzCr(CO)3+ (Bz = C6H6). The dissociation of the BzCr(CO)3+ ion proceeds by the sequential loss of three CO and benzene ligands. The first and third CO and the benzene loss reactions were associated with metastable precursor ions (lifetimes in the microsecond range). By simulating the resulting asymmetric time-of-flight peak shapes and breakdown diagram, the 0 K appearance energies of the four product ions were determined to be 8.33 +/- 0.05, 8.93 +/- 0.05, 9.97 +/- 0.06, and 11.71 +/- 0.06 eV, respectively. Combined with the ionization energy of BzCr(CO)3, 7.30 +/- 0.05 eV, the three successive Cr-CO bond energies in the BzCr(CO)3+ were found to alternate, with values of 1.03 +/- 0.05, 0.60 +/- 0.05, and 1.04 +/- 0.05 eV, respectively, and the Bz-Cr bond energy in BzCr+ is 1.74 +/- 0.05 eV, a trend confirmed by the density functional theory (DFT) calculations. Using the heats of formation of the fully dissociated products, C6H6, Cr+, and CO, the 298 K heats of formation the ionic BzCr(CO)n+ (n = 03) species were determined. By scaling the DFT calculated bond energies for the neutral molecules, the heats of formation of the neutral BzCr(CO)n (n = 03) were also obtained.