A New Distribution Function for Risk Analysis

This paper presents an alternative to the beta continuous probability distribution for risk analysis. Particular attention has been given to two major applications of distributions, namely project management risk and critical path analysis (PERT). In conjunction with the beta, the triangular and normal distributions are frequently employed in order to give sufficient robustness to risk analysis. The beta distribution, as used in PERT, has a major theoretical implementation flaw. The new distribution was developed to give a possible alternative method of assessing risk. It is shown that the requirement to estimate the most pessimistic variate may be replaced by the probability to exceed the mode. Proposals for other simplifications in risk analysis are discussed. Practical means to validate the most appropriate distributions for risk analysis are outlined, and a cost-data case study is included.     

Multicriteria decision making under uncertainty

Formalization for problems of multicriteria decision making under uncertainty is constructed in terms of guaranteed and weak estimates. A relevant definition of the vector maximinimax value is given. Parameterization and approximation of maximum, minimax, and maximinimax values based on the inverse logical convolution are suggested. An application for multicommodity networks is considered. Received: December 13, 2000 / Accepted: August 21, 2001?Published online May 8, 2002     

Molecular mobility in hydrogels based on poly(acrylic acid) and macrodiisocyanates

Partially water-swellable polymer networks were synthesized on the basis of poly(acrylic acid) and various macrodiisocyanates. Hydrophilic and hydrophobic local regions were revealed in swollen networks (hydrogels) by means of the spin probe technique. The local mobility in hydrophobic regions depends on the macrodiisocyanate structure; however, it is substantially lower than that in hydrophilic regions for all gels. It was assumed that the presence of hydrophobic and hydrophilic regions and the difference in their local dynamics must have a substantial effect on the pharmacokinetics of release of drugs immobilized in these hydrogels.     

Effects of annealing conditions on the electrical properties of Bi4-xNdxTi3O12 (x = 0.46) thin films processed at low temperature

Neodymium-substituted Bi₄Ti₃O₁₂ (BNdT) thin films were prepared by a chemical solution deposition technique on platinum- coated silicon substrates. All of the samples were annealed at the relatively low temperature of 600 °C by a rapid thermal annealing process in different atmospheres, such as O₂, air, and nitrogen, and vacuum. Irrespective of different annealing atmospheres, all of the BNdT thin films exhibit good ferroelectric properties, such as a saturated hysteresis loop, good fatigue endurance, and low leakage current density. A large remanent polarization (P_r) of ∼48 μC/cm² with an electric field of 240 kV/cm was observed from the BNdT thin film annealed in O₂ atmosphere. The BNdT thin films annealed in nitrogen and vacuum, at reduced oxygen partial pressures, exhibit smaller P_r than that annealed in oxygen. The difference of P_r of the BNdT thin films annealed in different atmospheres may originate from differences in the grain sizes and the number of oxygen vacancies. PACS 77.55.+f; 77.80.-e; 77.80.Fm; 81.15.-z     

Solid-phase epitaxy of CaSi2 on Si(1 1 1) and the Schottky-barrier height of CaSi2/Si(1 1 1)

Thin Ca films were evaporated on Si(1 1 1) under UHV conditions and subsequently annealed in the temperature range 200–650 °C. The interdiffusion of Ca and Si was examined by ex situ Auger depth profiling. In situ monitoring of the Si 2p core-level shift by X-ray photoemission spectroscopy (XPS) was employed to study the silicide formation process. The formation temperature of CaSi₂ films on Si(1 1 1) was found to be about 350 °C. Epitaxial growth takes place at T≥400 °C. The morphology of the films, measured by atomic force microscopy (AFM), was correlated with their crystallinity as analyzed by X-ray diffraction (XRD). According to measurements of temperature-dependent I–V characteristics and internal photoemission the Schottky-barrier height of CaSi₂ on Si(1 1 1) amounts to qΦ_Bn=0.25 eV on n-type and to qΦ_Bp=0.82 eV on p-type silicon.     

Application of rainbow schlieren deflectometry to measure temperature and oxygen concentration in a laminar gas-jet diffusion flame

The quantitative rainbow schlieren deflectometry (RSD) technique was applied to measure temperature and oxygen concentration in an axisymmetric hydrogen gas-jet diffusion flame burning in quiescent air at fuel jet exit Reynolds number of 70. Schlieren measurements were compared with conventional measurements using a thermocouple and a gas-sampling probe. Good agreement between the two measurement techniques was achieved on the fuel-lean side of the flame.     

Flow regime identification in a two-phase flow using wavelet transform

This study addresses the problem of the automatic flow regime identification in two-phase flows in pipes. A novel wavelet transform-based approach is proposed and validated using time series of differential pressure fluctuations. The experimental data on the differential pressure measured in a vertically installed Venturi meter for air-water flow were analyzed and found to be appropriate for flow regime identification. The wavelet spectrum of the measured signal is shown to characterize the flow patterns completely, and the vector of the wavelet variances is proposed as the characteristic vector for use in an on-line flow regime identification system.     

Compact integration operators for Fréchet-space-valued measures

Many operators in Banach spaces occur as the integration operator of a suitable vector measure; their compactness is completely described in [19]. However, many important spaces X in analysis (and integration operators in such spaces) do not fall into this scheme because X is not normable. Characterizing the compactness of integration operators in this setting is the aim of this note. The methods and techniques employed are quite different to the Banach space arguments used in [19].     

Rigidity and finiteness under Ricci curvature and volume controls

Consider the class of closed Riemannian manifolds M of dimension dim(M) \geqq 3 \dim(M) \geqq 3 , Ricci curvature Ric(M) \geqq -(n - 1) \textrm{Ric}(M) \geqq -(n - 1) , diameter diam(M) < D and almost maximal volume. We show that the isomorphism types of fundamental groups characterize the diffeomorphism types of manifolds in such a class. In particular, it can be viewed as a generalization of the well-known Mostow‘s rigidity theorem and a finiteness theorem.     

基于模糊集相容性的模糊控制规则优化方法

在简要介绍模糊模型的完备性和相容性的基础上 ,根据模糊集贴近度 ,提出模糊集相容性的概念 ;通过对模糊控制规则表特征的分析 ,进一步完善规则相容性概念及其定量评价方法 ;最后给出模糊控制规则模型自寻优优化方法。仿真结果表明 ,该方法可以大大提高控制系统的控制性能。