Solid-phase reagent for molecular spectroscopic determination of heavy metal speciation in natural water

A solid-phase reagent based on 1-(4-adamantyl-2-thiasolylazo)-2-naphthol adsorbed onto silica gel was prepared for Co(II) recovery and preconcentration prior to its sorption-spectroscopic detection. The immobilized reagent was applied to the determination of free cobalt ions in natural water. The solid-phase reagent and chemiluminescent method coupled with membrane filtration, gel-permeation and ion-exchange chromatography were applied to the study of the speciation of iron and cobalt in water from the Dnieper reservoirs and lakes of Kyiv City; their predominant forms were complexes of Fe(III) and Co(II) with dissolved organic matter and fulvic acids play a main role in their complexation.     

IR study of heterogeneity of OH groups in zeolite HY-splitting of OH and OD bands

We have been studying the problem of heterogeneity of OH groups in zeolites HY for a long time. The heterogeneity was suggested by the shift of the IR band of OH groups restoring upon ammonia desorption and also by the fact that the band of OH groups forming hydrogen bonds was relatively broad (broader than for homogeneous acidic OH). In the present study we present another important argument for heterogeneity: the splitting of the IR band of free OH and OD groups in a zeolite of Si/Al=8.3 dealuminated by (NH₄)₂SiF₆ treatment. Such a splitting is the best seen in low temperature spectra of OD groups. We found less acidic 3640 cm⁻¹ (AlO)(SiO)₂SiO₁HAl(OSi)₃ and more acidic 3625 cm⁻¹ (SiO)₃SiO₁HAl(OSi)₃ groups. The presence of these two kinds of hydroxyls corresponds to the presence of Si(2Al) and Si(1Al), respectively, detected in ²⁹Si MAS NMR spectra. We also found a small amount of strongly acidic 3599 cm⁻¹ hydroxyls interacting with extraframework Al species.     

Determination of ethaverine and papaverine using ion-selective electrodes.

Ion-selective poly(vinyl chloride) membrane electrodes for the opium alkaloids papaverine and ethaverine are presented. The electrode membranes contain ion pairs of the alkaloids with the anionic counter ion tetraphenylborate. The detection limits for all electrodes were approximately 2 x 10(-6) mol dm-3 at pH 5.0 in 100 mmol dm-3 buffered solutions and the measured slopes were close to the values theoretically expected. The selectivity coefficient observed for the ethaverine-tetraphenylborate electrode is 10(-1.1) with respect to papaverine. The suitability of the membranes for single-use electrodes is discussed.     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.     

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h^–1 instead of 750 mL h^–1 generated by the continuous-mode measurement) and also provides an improvement in the laboratory productivity by an increase of the sample throughput (85 h^–1 compared to 20 h^–1 found in the continuous mode). So, multicommutation is an environmentally and economically sustainable alternative to the methodology based on continuous measurements. The multicommutation-based method developed was applied to tellurium determination in commercially available milk samples; a calibration range of 0.0–0.5 ng mL^–1 and a detection limit of 0.20 ng L^–1 with average relative standard deviation of 2.1% were found. Comparable results were obtained for a series of samples using both continuous and multicommutation HG-AFS modes.     

Insight into the extractability of metals from soils using an implementation of the linear adsorption isotherm model

This paper deals with an often overlooked artifact in sequential and single extraction of metals from soils, viz. the volume to mass (V/m) ratio as a potential source for inadequate extraction yields. We offer a theoretical framework to get a grip on this intricate parameter and came up with a model based on a linear adsorption isotherm to derive the correct maximal metal extractability for a certain extractant. We verified the model experimentally using 0.1 mol l⁻¹ nitric acid for extraction of seven metals (Cr, Co, Cu, Cd, Pb, Ni and Zn) from an urban soil sample, and concluded that commonly used V/m ratios in the range of 10-40 ml g⁻¹ may give as much as 50% too low extraction yields. Thus, a strong caveat is in place as to be very critical what V/m ratios to use and preferably apply the model derived to obtain the correct maximal extractability using a variable V/m ratio method.     

Preconcentration using diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) for determination of molybdenum(VI) in seawater by ICP–OES

This paper reports a new method for preconcentration and separation of trace amounts of molybdenum in seawater samples prior to determination by inductively coupled plasma–atomic emission spectroscopy (ICP–OES). Diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) was synthesized by carboxymethylation of amino groups on triamine immobilized polymer, which was prepared by modification of 3-chloropropylpolysiloxane with diethylenetriamine. The resulting polysiloxane is highly selective and efficient in chelating Mo(VI) at trace levels. It can be used as a column packing material. The polysiloxane column can be reused over ten times without losing its original properties, so it is suitable for preconcentration of molybdenum species in seawater samples before determination. The parameters governing the characteristics of polysiloxane for adsorption of Mo(VI) were investigated. These include the effect of pH, amount of polysiloxane, equilibrium time, adsorption isotherm, maximum adsorption capacity, interfering ions, flow rate, capacity for reuse, and desorption. The precision of the preconcentration method, calculated as the relative standard deviation of seawater samples, was 3%. The preconcentration factor was 100. The detection limit, defined as 3 times the standard deviation of five replicate measurements of the blank sample at pH 3, was 0.17 g L^–1. Measurement results for standard reference materials were in good agreement with the certified values [(CRMs), NASS-2 Seawater (Open Ocean) and CASS-2 Seawater (Coastal)].     

Evaluation of glycoalkaloids in tubers of genetically modified virus Y-resistant potato plants (var. Désirée) by non-aqueous capillary electrophoresis coupled with electrospray ionization mass spectrometry (NACE–ESI–MS)

The glycoalkaloid content of transgenic potatoes was evaluated by an optimised method based on non-aqueous capillary electrophoresis coupled on-line with electrospray ionization-mass spectrometry (NACE-ESI-MS). The potato material consisted of tubers from a conventional cv. Désirée and from three lines of modified plants resistant, intermediate and susceptible to infection by potato virus Y (PVY). The main glycoalkaloids were confirmed to be alpha-solanine and alpha-chaconine with parent ion masses m/z 852 and 868, respectively. In addition, an unknown minor peak at m/z 850.6 was found both in conventional (control) and susceptible line potato tubers. Such a compound exhibited an MS(2) spectrum with fragments ions at 704 and 396 m/z derived by loss of two ions, i.e. m/z 146 and 307, most likely corresponding to a rhamnose unit and a [glucose-(rhamnose)(2)] moiety, respectively. Up to 30-80-fold higher concentrations of total glycoalkaloids were found in the peel compared to flesh samples of all tubers examined. TGA content was nearly doubled in peel samples of resistant compared to control lines, and these levels were lower than the limit recommended for food safety, i.e. 20-60 mg of TGA per 100 g fresh weight. Moreover, it was established that tubers produced by virus-resistant clones are substantially equivalent in glycoalkaloid contents to those produced by conventional potato varieties.     

Dynamic equilibrium of ion exchange in the system lead-cation exchanger at different temperatures

Summary The relationship between the ion-exchange reaction in a column and temperature was examined in the system lead-ion exchanger resin Lewatit S 1080. Lead binding was performed with 0.01 mol/l HNO₃ and elution with 4.0 mol/l HCl. The working temperature was gradually increased from 273 to 333 K. Thermostat columns were of own construction. The results were statistically analysed and graphically presented and the parameters obtained for elution curves were related to temperature. The elution curves were found to be temperature specific. The parameters such as elution band width, distribution factor, maximal volume of the eluate, maximal lead concentration in the eluate, confirmed this fact. At higher temperatures, larger volumes of elution solution were required for the elution of the same quantity of lead.

---

Ionenaustausch im System Blei-Kationischer Austauscher bei verschiedenen Temperaturen

     

The effect of UV-irradiation on composting of polyethylene modified by cellulose

LDPE and its blend with cellulose, obtained by extrusion, were UV-irradiated with different doses or biodegraded in soil up to 1 year. Simultaneously, the same samples were 1 year biodegraded after 20 h UV pre-irradiation in the same conditions. The course of photo- and biodegradation was monitored by estimation of average molecular weights and polydispersity, gel amount, changes of PE crystallinity and mechanical properties. Moreover, the biodegradation degree was calculated on the basis of carbon dioxide evolved and surface morphological changes were observed by SEM. It was found that biodegradation of PE + cellulose is hampered by intermolecular crosslinking of both components. Although, the rate of decomposition of PE + cellulose blends is low it is enough for disintegration of such materials in the natural environment.