Time-resolved enzymatic determination of glucose using a fluorescent europium probe for hydrogen peroxide

An enzymatic assay for glucose based on the use of the fluorescent probe for hydrogen peroxide, europium(III) tetracycline (EuTc), is described. The weakly fluorescent EuTc and enzymatically generated H₂O₂ form a strongly fluorescent complex (EuTc–H₂O₂) whose fluorescence decay profile is significantly different. Since the decay time of EuTc–H₂O₂ is in the microseconds time domain, fluorescence can be detected in the time-resolved mode, thus enabling substantial reduction of background fluorescence. The scheme represents the first H₂O₂-based time-resolved fluorescence assay for glucose not requiring the presence of a peroxidase. The time-resolved assay (with a delay time of 60 s and using endpoint detection) enables glucose to be determined at levels as low as 2.2 mol L^–1, with a dynamic range of 2.2–100 mol L^–1. The method also was adapted to a kinetic assay in order to cover higher glucose levels (mmol L^–1 range). The latter was validated by analyzing spiked serum samples and gave a good linear relationship for glucose levels from 2.5 to 55.5 mmol L^–1. Noteworthy features of the assay include easy accessibility of the probe, large Stokes shift, a line-like fluorescence peaking at 616 nm, stability towards oxygen, a working pH of approximately 7, and its suitability for both kinetic and endpoint determination.     

Interactions of Some Amino Acids with Aqueous Tetraethylammonium Bromide at 298.15 K: A Volumetric Approach

The apparent molar volumes, V_,2, of glycine, L-alanine, DL--amino-n-butyric acid, L-valine, and L-leucine have been determined in aqueous 0.25, 0.75, 1.0, and 1.5 mol-dm^–3 tetraethylammonium bromide (TEAB) solutions by density measurements at 298.15 K. These data have been used to calculate the infinite dilution apparent molar volumes, V_2,m, for the amino acids in aqueous tetraethylammonium bromide and the standard partial molar volumes of transfer (_tr V_2,m) of the amino acids from water to the aqueous salt solutions. The linear correlation of V_2,m for a homologous series of amino acids has been utilized to calculate the contribution of the charged end groups (NH₃⁺, COO^–), CH₂ group, and other alkyl chains of the amino acids to V_2,m. The results of the standard partial molar volumes of transfer from water to aqueous tetraethylammonium bromide have been interpreted in terms of ion–ion, ion–polar, and hydrophobic–hydrophobic group interactions. The volume of transfer data suggest that ion–ion or ion–hydrophilic interactions are predominant in the case of glycine and alanine, and hydrophobic–hydrophobic group interactions are predominant in the case of DL--amino butyric acid, L-valine, and L-leucine.     

Structural assignment of organotin hydrides containing the oxazoline ligand

A series of triorganotin hydrides and diorganotin dihydrides containing the optically active 2-(4-isopropyl-2-oxazolinyl)-5-phenyl ligand have been characterized by means of the multinuclear low-temperature NMR investigations, the results of which are discussed. In the corresponding organotin hydrides values of the ¹J(¹H-^117/119Sn) couplings appeared to be temperature dependent, supporting an axial/equatorial position of the hydrogen attached to the tin.     

Mechanism of the cyclization of dimethyl diethynyl silane with selenium tetrabromide: Computational and structural studies, and monitoring

The structure of 2,4-dibromo-2-dibromomethyl-3,3-dimethyl-1-selena-3-silacyclopentene-4, formed by regioselective electrophilic addition of SeBr₄ to dimethyl diethynyl silane, has been determined using X-ray analysis technique. Quantum chemistry methods were used to study elementary stages of the reaction. It was found that the first stage consisted of SeBr₄ conversion into bimolecular complex Br₂?SeBr₂, initiated by dimethyl diethynyl silane. Possible formation of five-membered and six-membered heterocycles involves different cyclization mechanisms. The formation of only five-membered heterocycle is explained by kinetically preferable ring closure through four-center transition state. The conclusions obtained by calculations were confirmed by monitoring of the reaction using ¹H NMR method.     

Tri-component diblock copolymers of poly(ethylene glycol)–poly(ε-caprolactone-<Emphasis Type="Italic">co</Emphasis>-lactide): synthesis,characterization and loading camptothecin

Biodegradable tri-component diblock copolymer was synthesized by bulk copolymerization of ε-caprolactone (CL) and D, L-lactide (LA) in the presence of methoxy poly(ethylene glycol) (MePEG), using stannous octoate as catalyst. Their chemical structure and physical properties were investigated by GPC, NMR, DSC, TGAand XRD. The increase of CL/LA ratio in the diblock copolymer leads to lower T _g, higher decomposition temperature and crystallinity. Nanoparticles formulated from MePEG–poly(CL-co-LA) (PCAE) possess spherical structure, which was characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The DLS results indicate that the particle size increased with the increase of CL/LA ratio and the hydrophobic fragment length in the copolymer. The drug encapsulation efficiency and the drug release behavior in vitro conditions of camptothecin were measured by high performance liquid chromatography (HPLC). The encapsulation efficiency can be achieved as high as 84.4% and the release behavior can be made well-controlled. MePEG–poly(CL-co-LA) nanoparticles might have a great potential as carriers for hydrophobic drugs.     

Five-coordinate Cobalt(II), Nickel(II) and Zinc(II) Complexes Derived from 2-pyridine-2-yl-3-(pyridine-2-carboxylideneamino)-1,2-dihydroquinazolin-4(3H)-one. The Crystal Structure of the Cobalt(II) Complex

The synthesis of cobalt(II), nickel(II) and zinc(II) complexes of 2-pyridine-2-yl-3(pyridine-2-carboxylideneamino)-1,2-dihydroquinazolin-4(3H)-one is described. The ligand and metal complexes were characterized by elemental analysis, conductivity measurements, spectral (u.v.–vis., i.r., 1D n.m.r., 2D hetcor and mass) and thermal studies. The cobalt(II) complex crystallizes as pink crystals in the monoclinic crystal system, space group P21/n with a = 10.066(6) Å, b = 15.929(9) Å, c = 12.624(7) Å, α = 90.00(9)°, β = 110.850 (8)°, γ = 90.00, V = 1891.5 (18) ų and Z = 4. The geometry around the cobalt atom is distorted trigonal bipyramidal with τ = 0.83 [structural parameter, τ = (β − α)/60; where α and β are the two basal angles in a five coordinate complex].     

AFM of adsorbed polyelectrolytes on cellulose I surfaces spin-coated on silicon wafers

Thin layers of cellulose I nanocrystals were spin-coated onto silicon wafers to give a flat model cellulose surface. A mild heat treatment was required to stabilize the cellulose layer. Interactions of this surface with polyelectrolyte layers and multilayers were probed by atomic force microscopy in water and dilute salt solutions. Deflection–distance curves for standard silicon nitride tips were measured for silicon, cellulose-coated silicon, and for polyelectrolytes adsorbed on the cellulose surface. Transfer of polymer to the tip was checked by running deflection–distance curves against clean silicon. Deflection–distance curves were relatively insensitive to adsorbed polyelectrolyte, but salt addition caused transfer of cationic polyelectrolyte to the tip, and swelling of the polyelectrolyte multilayers.     

What to Learn from a Comparative Genomic Sequence Analysis of <Emphasis Type="Italic">L</Emphasis>-Carnitine Dehydrogenase

Summary. In contrast to eukaryotic cells certain eubacterial strains have acquired the ability to utilize L-carnitine (R-(–)-3-hydroxy-4-(trimethylamino)butyrate) as sole source of energy, carbon and nitrogen. The first step of the L-carnitine degradation to glycine betaine is catalysed by L-carnitine dehydrogenase (L-CDH, EC 1.1.1.108) and results in the formation of the dehydrocarnitine. During the oxidation of L-carnitine a simultaneous conversion of the cofactor NAD⁺ to NADH takes place. This catabolic reaction has always been of keen interest, because it can be exploited for spectroscopic L-carnitine determination in biological fluids – a quantification method, which is developed in our lab – as well as L-carnitine production.Based on a cloned L-CDH sequence an expedition through the currently available prokaryotic genomic sequence space began to mine relevant information about bacterial L-carnitine metabolism hidden in the enormous amount of data stored in public sequence databases. Thus by means of homology-based and context-based protein function prediction is revealed that L-CDH exists in certain eubacterial genomes either as a protein of approximately 35 kDa or as a homologous fusion protein of approximately 54 kDa with an additional putative domain, which is predicted to possess a thioesterase activity. These two variants of the enzyme are found on one hand in the genome sequence of bacterial species, which were previously reported to decompose L-carnitine, and on the other hand in gram-positive bacteria, which were not known to express L-CDH. Furthermore we could not only discover that L-CDH is located in a conserved genetic entity, which genes are very likely involved in this L-carnitine catabolic pathway, but also pinpoint the exact genomic sequence position of several other enzymes, which play an essential role in the bacterial metabolism of L-carnitine precursors.     

Synthesis and anion binding properties of 2,5-diamidothiophene polypyrrole Schiff base macrocycles

[reaction: see text] Two easy-to-synthesize polypyrrolic 2,5-diamidothiophene Schiff base macrocycles are reported, along with their anion binding properties as determined via UV-vis spectroscopic titrations carried out in dichloroethane. There is a striking difference between the interactions with anions of the two macrocycles, a finding ascribed to differences in their rigidity. For example, the more flexible dipyrromethane-derived macrocycle displays a 1.2:1 hydrogen sulfate versus nitrate selectivity, while its more rigid bipyrrole-derived congener shows a 7.4:1 selectivity in favor to hydrogen sulfate.     

Structure and photochemistry of 18-diazo-1,4,7,10,13,16-hexaoxacyclononadeca-17,19-dione and its sodium and potassium complexes. Control of the ground-state conformation of 2-diazo-1,3-dicarbonyl fragment via host-guest complexation

[reaction: see text] The macrocyclic 18-diazo-1,4,7,10,13,16-hexaoxacyclononadeca-17,19-dione (3-diazo-2,4-dioxo-19-crown-6, 1) readily forms complexes with potassium (2, stability constant in methanol is K(K+) = 229 +/- 25 M(-1)) and sodium ions (3, K(Na+) = 84.2 +/- 7.9 M(-1) in methanol). According to B3LYP/6-31G+(d,p) calculations and temperature-dependent 1H NMR spectroscopy, the predominant conformation of 1 has a Z,Z arrangement of the diazo and carbonyl groups. The X-ray crystal structure analysis showed that the potassium complex (2) has the same Z,Z arrangement, while the sodium analogue (2) exists in conformation with Z,E geometry of the diazodicarbonyl moiety. Direct 254 nm photolysis of diazo compounds 1-3 in methanol results in the formation of 3-methoxy-2,4-dioxo-19-crown-6 (5), the product of the insertion of corresponding alpha,alpha'-dicarbonylcarbene into the O-H bond of the solvent. The triplet-sensitized photolysis of diazomalonates 1-3 produces 2,4-dioxo-19-crown-6 (6), which is apparently formed via the triplet state of the intervening carbene.