Concentrated solar radiation-assisted one-pot/multicomponent synthesis of pyranopyrazole derivatives under neat condition

Research on Chemical Intermediates - Concentrated solar radiation (CSR)-assisted synthesis of pyranopyrazole derivatives under solvent and catalyst-free condition has been reported in the present...     

Experimental investigation of drying of garlic clove in solar dryer using phase change material as energy storage

This investigation deals with thermodynamic analysis, which offers an alternative approach to evaluate the performance of solar dryers and thin-layer drying characteristics of garlic cloves in a developed system. The garlic cloves were dried from a moisture content of 55.5 % (w.b.) to 6.5 % (w.b.) for 8 h. The drying data obtained were fitted to five different drying kinetics models. Of these, the model suggested by Midilli et al. [28] had the best fit with the drying behavior of garlic cloves. The energy efficiency without and with recirculation of the air exiting the drying chamber during the study varied from 43.06 to 83.73 %, and 3.98 to 14.95 %, respectively, while the exergy efficiency corresponding to the energy efficiency of the drying process ranged from 5.01 to 55.30 % and 67.06 to 88.24 %, respectively.     

Kinetics and thermoluminescence glow curve study of Ba2MgSi2O7:Eu3+, Dy3+

This paper reports thermoluminescence glow curves of Eu³⁺, Dy³⁺-doped Ba₂MgSi₂O₇ phosphor for different UV exposure times. Kinetic data were evaluated by the peak-shape method. The glow curves shift toward higher intensity with increasing exposure time to UV at 365 nm. When the heating rate was 5 °C s^?1, peaks were observed at 101.76, 109.69, 102.67, and 104.05 °C, respectively, after UV exposure for 5, 10, 15, and 20 min. The glow peaks are indicative of second-order kinetics. Different kinetic data, i.e. trap depth, order of kinetics, activation energy, and frequency factor were also calculated. To evaluate the persistence characteristics of the luminescence of the phosphor, the lifetime of the charge in the trap was calculated; it was 348, 660, 368, and 428 s for UV exposure of 5, 10, 15, and 20 min, which indicates the luminescence of the phosphor is persistent.     

N-donor stabilized complexes of nickel(II) diphenyldithiophosphates: single-crystal X-ray,HSA and computational analysis

Transition Metal Chemistry - Nickel(II) complexes with octahedral coordination stabilized by N-donor ligands corresponds to [{(ArO)2PS2}2Ni·L2] [Ar = 4-(C2H5)C6H4 (3), and...     

Lossy mode resonance-based uniform core tapered fiber optic sensor for sensitivity enhancement

A lossy mode resonance (LMR)-supported fiber optic sensor in which a uniform fiber core is placed among two identical tapered regions, is investigated numerically. Indium tin oxide (ITO) and aluminum-doped zinc oxide (AZO) are considered as LMR active materials used to excite several lossy modes and gold and silver are used as surface plasmon resonance (SPR) active materials. In this probe design, a central uniform core coated with ITO/AZO is the active sensing region, whereas tapered regions are meant for bringing the incident angle close to the critical angle. The sensitivity of the present fiber optic bio-sensor is evaluated for first two LMRs utilizing both ITO and AZO separately, along with its variation with the taper ratio (TR). For ITO, the maximum sensitivity values are observed to be 18.425 μm RIU⁻¹ (refractive index unit) and 0.825 μm RIU⁻¹, corresponding to the first and second LMRs, respectively, at a TR of 1.6 and for AZO, equivalent values are 0.79 μm RIU⁻¹ and 0.35 μm RIU⁻¹, respectively, at a TR of 2.0. The results illustrate that the first LMR is more sensitive than the second LMR and the ITO-coated probe possesses greater sensitivity than the AZO-coated probe for both LMRs. Similarly, for the fiber optic SPR sensor, the maximum value of sensitivity is 5.6425 μm RIU⁻¹, in the case of gold and 5.0615 μm RIU⁻¹ in the case of silver, at a TR of 1.6. Hence, the result shows that the sensor with the present fiber optic probe design has around a 3-fold enhancement in sensitivity compared with conventional SPR sensors. This study will have applications in many sensing schemes where the requirement of large sensitivity is vital.     

Miceller-Mediated Phosphomolybdic Acid: Highly Effective Reusable Catalyst for Synthesis of Quinoline and Its Derivatives

A simple, efficient, and ecofriendly procedure has been developed for the synthesis of quinoline and its derivatives in a one-pot reaction of aniline with crotonaldehyde or methyl vinyl ketone using phosphomolybdic acid as solid acid catalyst in miceller media. The catalyst was easily recycled and reused.     

A novel method for bromodecarboxylation of α,β-unsaturated carboxylic acids using catalytic sodium nitrite

A first novel synthetic utility of catalytic sodium nitrite in combination with aqueous HBr, for bromo decarboxylation of α,β-unsaturated carboxylic acid is described. α,β-Unsaturated carboxylic acid compounds successfully converted into corresponding bromo compounds. The advantages of this protocol are shorter reaction time and moderate to good yields.     

High strain-rate behavior of ice under uniaxial compression

In the present study, a modified split Hopkinson pressure bar (SHPB) is employed to investigate the dynamic response of ice under uniaxial compression in the range of strain rates from 60 to 1400 s^?1 and at initial test temperatures of ?10 and ?30 °C. The compressive strength of ice shows positive strain-rate sensitivity over the range of strain rates employed; a slight influence of ice microstructure is observed, but it is much less than that reported previously for ice deformation under quasi-static loading conditions [Schulson, E.M., IIiescu, D., Frott, A., 2005. Characterization of ice for return-to-flight of the space shuttle. Part 1 – Hard ice. NASA CR-2005-213643-Part 1]. Specimen thickness, within the range studied, was found to have little or no effect on the peak (failure) strength of ice, while lowering the test temperature from ?10 to ?30 °C had a considerable effect, with ice behaving stronger at the lower test temperature. Moreover, unlike in the case of uniaxial quasi-static compression of ice, the effect of specimen end-constraint during the high rate compression was found to be negligible. One important result of these experiments, which may have important implications in modeling ice impacts, involves the post “peak-stress” behavior of the ice in that the ice samples do not catastrophically lose their load carrying capacity even after the attainment of peak stress during dynamic compression. This residual (tail) strength of the damaged/fragmented ice is sizable, and in some cases is larger than the quasi-static compression strength reported for ice. Moreover, this residual strength is observed to be dependent on sample thickness and the strain rate, being higher for thinner samples and at higher strain-rates during dynamic compression.